• 한국광학회지
• /
• 제16권1호
• /
• pp.99-102
• /
• 2005

광섬유 링 레이저의 출력파장 가변을 위해서 신뢰성있는 새로운 스트레인 인가장치를 제작하고 이 장치를 이용하여 파장가변 광섬유 링 레이저를 구현하였다. 제작된 광섬유 링 레이저의 출력파워는 -12 dBm이었으며, 선폭은 0.05 nm이었다. 새로운 스트레인 인가장치를 이용하여 광섬유에 8000 $\mu$ strain을 인가하였을 때 광섬유 링 레이저의 출력파장은 약 10 nm 가변되는 것을 확인 할 수 있었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.679-682
• /
• 2003

We report the suitable SLS (sequential lateral solidification) as a function of laser intensity. Precursor film is changed from 50nm to 100nm and is deposited on glass substrate by PECVD. We can find the suitable SLS length by changing the mask size. In this paper, we present the well-defined grain growth conditions as a function of laser intensity.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 춘계학술대회 논문집
• /
• pp.231-234
• /
• 2007

A measurement technique in an industry site is basis technique which is bringing a ripple effect on an increasing productivity. Recently, a measurement request is increasing in the industry field as well as the variety field such as leisure, research. Thus, it is in point of time to secure an internal technique about measurement using a laser. In this paper, we prepare to develop the industrial precision laser distance measure device that is available measuring in several hundred meters[m]. In other words, we are planning to measure a wide distance using a laser diode that has long life and is compact, inexpensive. Through this research, we'll secure the pulse laser control technique, a signal processing, technique for distance calculation about a laser distance measurement system. And hereafter, we'll plan to commercialize a laser distance device using this research.

• 한국재료학회지
• /
• 제17권7호
• /
• pp.352-357
• /
• 2007

Since a pattern defects "repair" system using a diode pumped solid state laser for Flat Panel Display (FPD) was suggested, a lot of laser systems have been explored and developed for mass-production microfabrication process. A maskless lithography system using 405 nm violet laser and Digital Micromirror Device (DMD) has been developed for PDP and Liquid Crystal Display (LCD) Thin Film Transistor (TFT) photolithography process. In addition, a "Laser Direct Patterning" system for Indium Tin Oxide (ITO) for Plasma Display Panel(PDP) has been evaluated one of the best successful examples for laser application system which is applied for mass-production lines. The "heat" and "solvent" free laser microfabrications process will be widely used because the next-generation flat panel displays, Flexible Display and Organic Light Emitting Diode (OLED) should use plastic substrates and organic materials which are very difficult to process using traditional fabrication methods.

• 조명전기설비학회논문지
• /
• 제30권1호
• /
• pp.1-7
• /
• 2016

With a collimated $CO_2$ laser beam, the bidirectional current switching was realized in a two-terminal electronic device based on a highly resistive vanadium dioxide($VO_2$) thin film. A $VO_2$ thin film was grown on a $Al_2O_3$ substrate by a pulsed laser deposition method. For the fabrication of a two-terminal electronic device, the $VO_2$ thin film was etched by an ion beam-assisted milling method, and the $VO_2$ device, of which $VO_2$ patch width and electrode separation were 50 and $100{\mu}m$, respectively, was fabricated through a photolithographic method. A bias voltage range for stable bidirectional current switching was found by using the current-voltage property of the device measured in a current-controlled mode. The transient responses of bidirectionally switched currents were analyzed when the laser was modulated at a variety of pulse widths and repetition rates. A switching contrast was measured as ~3333, and rising and falling times were measured as ~39 and ~21ms, respectively.

• 조명전기설비학회논문지
• /
• 제29권11호
• /
• pp.28-34
• /
• 2015

By incorporating a 966nm near infrared laser, we demonstrated bidirectional current triggering of between 0 and 10mA in a two-terminal planar device based on a highly resistive vanadium dioxide ($VO_2$) thin film grown by a pulsed laser deposition method. A two-terminal planar device, which had an electrode separation of $100{\mu}m$ and a $50{\mu}m-wide$ $VO_2$ conducting layer, was fabricated through ion beam-assisted milling and photolithographic techniques. A bias voltage range for stable bidirectional current triggering was determined by investigating the current-voltage curves of the $VO_2-based$ device in a current-controlled mode. Bidirectional current triggering of up to 10mA was realized by directly illuminating the $VO_2$ film with a focused infrared laser beam, and the transient responses of triggered currents were analyzed when the laser was modulated at various pulse widths and repetition rates. A switching contrast between off- and on-state currents was evaluated as ~3571, and the rising and falling times were measured as ~40 and ~20ms, respectively.

• 제어로봇시스템학회논문지
• /
• 제13권3호
• /
• pp.249-255
• /
• 2007

Under the situation of a fire, it is difficult for a rescue robot to use sensors such as vision sensor, ultrasonic sensor or laser distance sensor because of diffusion, refraction or block of light and sound by dense smoke. But, braille blocks that are installed for the visaully impaired at public places such as subway stations can be used as a map for autonomous mobile robot's localization and navigation. In this paper, we developed a laser sensor stan device which can detect braille blcoks in spite of dense smoke and integrated the device to the robot developed to carry out rescue mission in various hazardous disaster areas at KIST. We implemented MCL algorithm for robot's attitude estimation according to the scanned data and transformed a braille block map to a topological map and designed a nonlinear path tracking controller for autonomous navigation. From various simulations and experiments, we could verify that the developed laser sensor device and the proposed localization method are effective to autonomous tracking of braille blocks and the autonomous navigation robot system can be used for rescue under fire.

• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 2002년도 추계학술발표대회 논문개요집
• /
• pp.73-79
• /
• 2002

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.231-231
• /
• 2006

We fabricated a polymer sub-microstructure for optical device application by two-photon-induced laser lithography technique. Polymer pattern could be minimized as small as ${\sim}100\;nm$. The photopolymerization resin contains laser-dye, thus promising a high level of the optical gain. We utilized the lithography technique to the photonic crystal application, where the template of the two-dimensional photonic crystal was modified by polymer gain medium as defect-shape and line-shape orientations. Photonic band gap effect from polymer-doped photonic crystals is expected to exploit the application such as organic solid-state laser device.

• 대한기계학회논문집A
• /
• 제26권9호
• /
• pp.1727-1735
• /
• 2002

The usage of beam scanning type laser marker is rapidly increasing in the field of semiconductor equipment. A device called ″beam adjuster″ is employed to adjust the visible diode laser, which points the marking position for various setting. The device is very sensitive to manufacturing tolerance and assembly condition. Axiomatic approach has been applied to the design of the device. An existing design is analyzed based on the Independence Axiom. The existing design is found to violate the axiom. Two new designs are proposed to satisfy the Independence Axiom. The Information Axiom is utilized to evaluate the designs. A design is selected to have the minimum information content. The significance of this research is that a full cycle of axiomatic design is applied to a real engineering product.