• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.158-163
• /
• 2002

This paper presents a multiple sensor system for rapid and high-precision coordinate data acquisition in the OMM (On-machine measurement) process. In this research, three sensors (touch probe, laser, and vision sensor) are integrated to obtain more accurate measuring results. The touch-type probe has high accuracy, but is time-consuming. Vision sensor can acquire many point data rapidly over a spatial range but its accuracy is less than other sensors. Also, it is not possible to acquire data for invisible areas. Laser sensor has medium accuracy and measuring speed among the sensors, and can acquire data for sharp or rounded edge and the features with very small holes and/or grooves. However, it has range- constraints to use because of its system structure. In this research, a new optimum sensor integration method for OMM is proposed by integrating the multiple-sensor to accomplish mote effective inspection planning. To verify the effectiveness of the proposed method, simulation and experimental works are performed, and the results are analyzed.

• 디지털융복합연구
• /
• 제10권10호
• /
• pp.301-306
• /
• 2012

본 논문은 머신비전시스템에서 정확한 이미지 획득을 위한 방법을 제안한다. 각종 렌즈에서 요구되는 가장 중요한 기능으로는 실물과 동일한 고품질의 결상을 구현하는 광학적 역할이다. 그러나 머신비전시스템의 입력부에서는 렌즈의 수차로 인하여 왜곡현상이 발생한다. 이러한 문제를 해결하기 위해 실세계 좌표계와 영상 좌표계 간의 변환 관계를 정의해주는 매핑 기능으로, 행렬연산을 통하여 두 좌표간의 거리를 계산하여 정확한 위치를 지정하게 된다. 레이저 정밀 가공작업에서도 Galvanometer를 사용하면 비구면 초점 렌즈에 의하여 발생되고 있는 렌즈 수차를 보정하여야 가공 오차를 개선 할 수 있다. 비구면 렌즈의 수차는 2차원 곡선의 형태를 가지고 있으나, 기존의 렌즈 보정 방법인 선형방법은 매우 많은 점들을 검사하여 보정시간이 많이 소요되는 문제점이 있었다. 가공장비에서 렌즈의 수차로 인하여 발생하는 가공오차를 감소시키기 위하여 Bilinear interpolation 기법을 적용하는 방법을 제안하였다. 제안한 방법은 기존 선형방법과 비교하여 위치 오차의 평균값과 표준편차가 향상되었음 실험을 통하여 입증하였으며 실제 레이저 응용업무에 적용하고 있다.

• 한국측량학회지
• /
• 제31권3호
• /
• pp.199-207
• /
• 2013

수로측량에서 멀티빔 시스템에 의해 측량된 자료는 여러 가지 요인들에 의해 다양한 오차들을 포함한다. 이들은 패치 테스트라는 검정 단계를 통해 보정되며, 기존의 방법을 이용한 경우 정확한 시스템 검정을 위해 약 8회 내외의 테스트가 수행되어야한다. 본 연구에서 보다 신속하고 정확한 멀티빔 시스템 검 보정을 위해, 지상 레이저 스캐닝기술과 TS 측량을 이용하여 선박의 정확한 오프셋이 결정되었고, 이러한 자료를 초기 입력값으로 한 패치 테스트가 수행되었다. 그 결과, TS 측량에서 폐합오차가 0.001 m, 스캐닝에서의 후시 관측 오차가 0.005 m 이내였다. 동일한 지역 좌표계로 획득된 모든 측량자료는 선박 기준 좌표계로 변환되었고, 이 과정에서 모든 회전각에 대한 결정계수는 0.99 이상, 표준편차는 0.008 m 이하로 나타났다. 끝으로, 계산된 탑재 센서 오프셋과 모션 센서 오프셋을 이용한 패치 테스트에서 멀티빔 송수파기 오프셋은 단 1회의 보정만으로 수로측량 업무규정을 만족하였다. 이러한 결과에 비춰볼 때, 멀티빔 시스템의 검 보정에서 지상 레이저 스캐닝 및 TS 측량의 활용 가능성이 충분히 있다고 판단된다.

• 한국군사과학기술학회지
• /
• 제9권3호
• /
• pp.5-11
• /
• 2006

This paper is launched to get an exact bore-sighting value in the process of assembling for a dual-barrel weapon. Image processing method with a CCD(Charged Coupled Device) camera is chosen for the error reduction of bore-sighting. The results of this method by using a CCD camera and the testing target method are described in this paper. After the performance of the dual-barrel weapon and that of the fire-control system in the dual barrel weapon system is confirmed, the bore-sighting which is a part of the process in the system assembly is accomplished. In this process, the position of the barrel is identified by using the testing target method that is an existing bore-sighting method. Then, the fixing line of the fire-control system is checked by a day-optical part. The precision of the bore-sighting is required within several mils, however the manual method using the naked eyes makes it worse. Therefore, a CCD camera is installed in the eyepieces. Next, we can get an image of the sighting and the center coordinate values of the laser-pointer from each barrel by image processing method. A required bore-sighting value is calculated from the eccentricity of the center coordinate. Finally, It can be applied to adopt this result in the assembling process of the dual-barrel weapon.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.566-571
• /
• 2009

A calibration method for multiple sets of stereo vision cameras is proposed. To measure the three-dimensional shape of a very long object, measuring the object at different viewpoints and registration of the data are necessary. In this study, two lasers beams generate two strings of calibration targets, which form straight lines in the world coordinate system. An evaluation function is defined to calculate the sum of the squares of the distances between each transformed target and the fitted line representing the laser beam to each target, and the distances between points appearing in the data sets of two adjacent viewpoints. The calculation process for the approximation method based on data linearity is presented. The experimental results show the effectiveness of the method.

• 한국CDE학회논문집
• /
• 제17권3호
• /
• pp.156-163
• /
• 2012

Real-time three-dimensional shape measurement is becoming increasingly important in various fields, including medical sciences, high-technology industry, and microscale measurements. However, there are not so many 3D profile tools specially designed for specifically narrow space, for example, to scan the tooth shape of a human jaw. In this paper, a real-time 3D intraoral scanner is proposed for the measurement of tooth profile in the mouth cavity. The proposed system comprises a laser diode beam, a micro charge-coupled device, a graticule, a piezoelectric transducer, a set of optical lenses, and a polhemus device sensor. The phase-shifting technique is used along with an accurate calibration method for the measurement of the tooth profile. Experimental and theoretical inspection of the phase-to-coordinate relation is presented. In addition, a nonlinear system model is developed for collimating illumination that gives the more accurate mathematical representation of the system, thus improves the shape measurement accuracy. Experiment results are presented to verify the feasibility and performance of the developed system. The experimental results indicate that overall measurement error accuracy can be controlled within 0.4 mm with a variability of ${\pm}0.01$.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1958-1961
• /
• 2004

Ring Laser Gyroscopes used as navigational sensors inherently experience a lock-in region, where very low rotational rates are not measurable. Most RLG manufacturers use a mechanical dither motor that applies a small oscillatory rotational motion larger than this region to resolve this problem. Any input acceleration that bends this dithering axis causes flexure error, which is a noncommutative error that can not be compensated by simply using integrated gyro sensor output. This paper introduces noncommutative error equations that define attitude errors caused by flexure errors. In this paper, flexure error is classified as sensor level error if the sensing axis coincides with the dithering axis and as system level error if the two axes do not coincide. The relationship between gyro output and the rotation vector is introduced and is used to define the coordinate transformation matrix and angular motion. Equations are derived for both sensor level and system level flexure error analysis. These equations show that RLG based INS attitude error caused by flexure is directly proportional to time, amount of input acceleration and the dynamic frequency of the vehicle.

• Journal of Welding and Joining
• /
• 제14권2호
• /
• pp.96-105
• /
• 1996

Robot systems are widely utilized in the shipbuilding industry to enhance the productivity by automating the welding process. In order to increase productivity, it is necessary to reduce the time used for robot teaching. In this work, the automatic teaching system is developed for the subassembly process in the shipbuilding industry. A alser/vision sensor is designed to detect the weld seam and the image of the fillet joint is processed using the arm method. Positions of weld seams defined in the CAD database are transformed into the robot coordinate, and the dynamic programming technique is applied to find the sub-optimum weld path. Experiments are carried out to verify the system performance. The results show that the proposed automatic teaching system performs successfully and can be applied to the robot system in the subassembly process.

• 정보과학회 논문지
• /
• 제43권5호
• /
• pp.562-568
• /
• 2016

포인트 클라우드 데이터는 어떠한 형태를 표현하기 위해 무수히 많은 점들을 갖는 데이터 집합으로 특정 벡터 시스템에서 표현될 수 있으며, 일반적으로 3차원 좌표 공간에서 다양한 특성을 갖게 된다. 본 논문은 3차원 좌표 시스템의 포인트 클라우드에서 기존 방법(Hough Transform)보다 빠른 실린더 형태의 파이프 추정을 목표로 한다. 이를 위해 비교적 빠른 RANdom SAmple Consensus(RANSAC)를 사용한다. 본 논문에서 제안하는 실린더 형태의 파이프 추정은 두 가지 형태의 수학적 모델을 근거로 파라미터를 계산하고, 결과를 조합하여 예측한다. 두 가지 수학적 모델은 구(Sphere)와 직선(Line)이며, RANSAC 적합을 통해 실린더의 축과 반지름이 될 수 있는 구의 파라미터(중심과 반지름)를 계산하고, 이를 직선화하여 실린더를 추정한다. 이는 법선 추정(Normal Estimation) 및 분할(Segmentation) 없이 비교적 정확도를 유지하며, 빠르게 실린더 매칭을 할 수 있게 한다. 빠른 실린더 매칭은 실시간 파이프 추정이 필요한 레이저 스캐닝 및 건설 역설계 분야에서 활용할 수 있을 것이다.

• 대한기계학회논문집B
• /
• 제25권7호
• /
• pp.905-914
• /
• 2001

A large eddy simulation(LES) is performed for turbulent flow around a bluff body inside a sudden expansion cylinder chamber, a configuration which resembles a premixed gas turbine combustor. To promote turbulent mixing and to accommodate flame stability, a flame holder is installed inside the combustion chamber. The Smagorinsky model is employed and the calculated Reynolds number is 5,000 based on the bulk velocity and the diameter of the inlet pipe. The simulation code is constructed by using a general coordinate system based on the physical contravariant velocity components. The predicted turbulent statistics are evaluated by comparing them with the laser-doppler velocimetry (LDV) measurement data. The agreement of LES with the experimental data is shown to be satisfactory. Emphasis is placed on the time-dependent evolutions of turbulent vortical structure behind the flame holder. The numerical flow visualizations depict the behavior of large-scale vortices. The turbulent mixing process behind the flame holder is analyzed by visualizing the sectional views of vortical structure.