• Journal of Korea Society of Industrial Information Systems
• /
• v.21 no.6
• /
• pp.71-80
• /
• 2016

Along with the increase in the standard of living, the interest and awareness level of the public about environmental issues have also gradually increased. Recently, time spent on indoor activities have increased and the need for awareness and demand on methods in improving the quality of an indoor environment has been recognized. The purpose of this study is to sense the environment information through real-time monitoring of the room environment by using the IoT based technology and to maintain and improve the indoor environment to an appropriate level through the developed interlocking controller device. This provides an automatic control system in improving the indoor environment at home and other small areas like general offices in place of the traditional passive interior environmental improvement actions or large-scale facility control system. A status analysis with the relative reference values of the air quality and CO2, temperature and humidity and illumination and noise was applied through transmitting a control signal to automatic control module in accordance with the nine indoor environment standards set to improve the indoor environment.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.4
• /
• pp.433-445
• /
• 2014

Single phase voltage source converter (VSC) is an important power electronic converter (PEC), including single-phase voltage source inverter (VSI), single-phase voltage source rectifier (VSR), single-phase active power filter (APF) and single-phase grid-connection inverter (GCI). As the fundamental part of large scale PECs, single-phase VSC has a wide range of applications. In the paper, as first, on the basis of the concept of the discontinuous pulse-width modulation (DPWM) for three-phase VSC, a new DPWM of single-phase VSR is presented by means of zero-sequence component injection. Then, the transformation from stationary frame (abc) to rotating frame (dq) is designed after reconstructing the other orthogonal current by means of one order all-pass filter. Finally, the presented DPWM based single-phase VSR is established analyzed and simulated by means of MATLAB/SIMULINK. In addition, the DPWMs presented by D. Grahame Holmes and Thomas Lipo are discussed and simulated in brief. Obviously, the presented DPWM can also be used for single-phase VSI, GCI and APF. The simulation results show the validation of the above modulation algorithm, and the DPWM based single-phase VSR has reduced power loss and increased efficiency.

• Journal of Power Electronics
• /
• v.15 no.5
• /
• pp.1305-1317
• /
• 2015

Distributed generation systems (DGSs) have been getting more and more attention in terms of renewable energy use and new generation technologies in the past decades. The self-excited induction generator (SEIG) occupies an important role in the area of energy conversion due to its low cost, robustness and simple control. Unlike synchronous generators, the SEIG has to absorb capacitive reactive power from the outer device aiming to stabilize the terminal voltage at load changes. This paper presents a novel static VAR compensator (SVC) called a magnetic energy recovery switch (MERS) to serve as a voltage controller in SEIG powered DGSs. In addition, many small scale SEIGs, instead of a single large one, are applied and devoted to promote the generation efficiency. To begin with, an expandable mathematic model based on a d-q equivalent circuit is created for parallel SEIGs. The control method of the MERS is further improved with the objective of broadening its operating range and restraining current harmonics by parameter optimization. A hybrid control strategy is developed by taking both of the stand-alone and grid-connected modes into consideration. Then simulation and experiments are carried out in the case of single and double SEIG(s) generation. Finally, the measurement results verify that the proposed DGS with SVC-MERS achieves a better stability and higher feasibility. The major advantages of the mentioned variable reactive power supplier, when compared to the STATCOM, include the adoption of a small DC capacitor, line frequency switching, simple control and less loss.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.11
• /
• pp.36-44
• /
• 1994

In this paper, a high-level process control language is developed to construct multi-loop controllers for large scale process control systems. Function locks are defined which are basic functions necessary to configure a multi-loop controller. Each block is presented to the function code which is a line of ASCII codes and has the characteristics to be simple and to be easily understood. A control algorithm for a process is attained by means of the arrangement of function codes with order. In order to be used to various environments of target hardwares, a transformation program is prepared that transfers a control program configured by function codes to a C-language program. The proposed control language is easy and simple to use, possible to expend, and able to apply to various control systems. Simulation results are included to show the availability for the usage of the proposed control language in real world.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.11
• /
• pp.1305-1317
• /
• 1999

NUMA 구조는 원격 메모리에 대한 접근이 불가피한 구조적 특성 때문에 상호 연결망이 성능을 좌우하는 큰 변수가 된다. 기존에 대중적으로 사용되던 버스는 물리적 확장성 및 대역폭에서 대규모 시스템을 구성하는 데 한계를 보인다. 이를 대체하는 고속의 지점간 링크를 사용한 링 구조는 버스가 가지는 확장성 및 대역폭의 한계라는 단점을 개선하였으나, 많은 클러스터가 연결되는 경우에는 전송 지연시간이 증가하는 문제점을 가지고 있다. 본 논문에서는 스누핑 프로토콜이 적용된 링 구조에서 클러스터 개수 증가에 따른 지연시간 증가의 문제점을 보완하기 위해 계층적 링 구조로의 확장을 제안하고, 이 구조에 효과적인 캐쉬 일관성 프로토콜을 설계하였다. 전역 링과 지역 링을 연결하는 브리지는 캐쉬 프로토콜을 관리하며 이 프로토콜에 의해 지역 링의 부하를 줄일 수 있도록 트랜잭션을 필터링하는 역할도 담당함으로써 시스템의 성능을 향상시킨다. probability-driven 시뮬레이터를 통해 계층적 링 구조가 시스템의 성능 및 링 이용률에 미치는 영향을 알아본다. Abstract Since NUMA architecture has to access remote memory, interconnection network performance determines performance of NUMA architecture. Bus, which has been used as popular interconnection network of NUMA, has a limit to build a large-scale system because of limited physical scalability and bandwidth. Ring interconnection network, composed of high-speed point-to-point link, made up for bus's defects of scalability and bandwidth. But, it also has problem of increasing delay as the number of clusters is increased. In this paper, we propose a hierarchical expansion of snoop-based ring architecture in order to overcome ring's defects of increasing delay. And we also design an efficient cache coherence protocol adopted to this architecture. Bridge, which connects local ring and global ring, maintains cache coherence protocol and does snoop-filtering which reduces local ring and cluster bus utilization. Therefore bridge can improve performance of this system. We analyze effects of hierarchical architecture on the performance of system and utilization of point-to-point links using probability-driven simulator.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.14 no.1
• /
• pp.16-22
• /
• 1994

In contrast to the machineries using rolling element bearings, systems with journal bearings generally operate in large scale and under severe loading condition such as steam generator turbines and internal combustion engines. Failure of the bearings in these machineries can result in the system breakdown. To avoid the time consuming repair and considerable economic loss, the detection of incipient failure in journal bearings becomes very important. In this experimental approach, acoustic emission monitoring is applied to the detection of incipient failure caused by several types of abnormal operating condition most probable in the journal bearing systems. It has been known that the intervention of foreign materials, insufficient lubrication and misassembly etc. are principal factors to cause bearing failure and distress. The experiment was conducted under such designed conditions as hard particles in the lubrication layer, insufficient lubrication, and metallic contact in the simulated journal bearing system. The results showed that acoustic emission could be an effective tool to detect the incipient failure in journal bearings.

• Journal of Korean Institute of Industrial Engineers
• /
• v.41 no.3
• /
• pp.233-242
• /
• 2015

This paper analyzes a multi-product inbound lot-sizing and outbound dispatching problem with multi-vehicle types in a third-party logistics distribution center. The product must be delivered to the customers within the delivery time window and backlogging is not allowed. Replenishing orders are shipped by several types of vehicles with two types of the freight costs, i.e., uniform and decreasing, are considered. The objective of this study is to determine the lot-size and dispatching schedules to minimize the total cost with the sum of inbound and outbound transportation and inventory costs over the entire time horizon. In this study, we mathematically derive a mixed-integer programming model and propose a genetic algorithm (GA1) based on a local search heuristic algorithm to solve large-scale problems. In addition, we suggest a new genetic algorithm (GA2) with an adjusting algorithm to improve the performance of GA1. The basic mechanism of the GA2 is to provide an unidirectional partial move of products to available containers in the previous period. Finally, we analyze the results of GA1 and GA2 by evaluate the relative performance using the gap between the objective values of CPLEX and the each algorithm.

• Journal of Korea Multimedia Society
• /
• v.20 no.3
• /
• pp.520-532
• /
• 2017

Large-scale natural disasters such as typhoon and localized torrential downpour cause widespread human and property damages. Recently, management systems using GIS are being developed to manage such disasters from various angles. Integrated disaster management encompasses diverse areas such as prediction through the computation of disaster information and field support for response. The development of disaster information systems must also consider the installation of various computation modules. Furthermore, GIS is generally included for realistic description of the field situation and for spatial operations. This study aims to develop the core module of a visualization platform for the 3D GIS services of integrated disaster information using Unity engine This system will enable integrated disaster management from various angles, encompassing disaster prevention experts, field support personnel, and citizens.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.23 no.3
• /
• pp.545-559
• /
• 2013

There is a limitation on counteracting recent cyber-attacks with only technical security measures because they become more intelligent and large-scale to aim at employees instead of systems directly or to be conducted with unspecified multiple PCs. Thus, comprehensive measures revolved around related manpower are necessary to deal with them. However, domestic information security education system which is the base of professional manpower training lacks medium-and long-term plans for information security education, verification of education programs, and information sharing among educational institutions. This paper suggests information security education development plans for resolving problems on domestic education systems and improving cyber information security environment such as a national information security education master plan, certification system introduction of education programs, and professional manpower database management.

• The KIPS Transactions:PartB
• /
• v.11B no.7 s.96
• /
• pp.803-812
• /
• 2004

The performance of video-on-demand(VOD) systems is known to be mainly dependent on a scheduling mechanism which they employ. Broadcast-based scheduling schemes have attracted a lot of attention as an efficient way of distributing popular videos to very large client populations. The main motivations of broadcasting scheduling mechanisms are that they scale up extremely well and they have very modest bandwidth requirements. This paper studies this issue and proposes a new broadcasting scheduling mechanism, named fast universal video dis-tribution(FUVD). FUVD scheme dynamically constructs a video broadcasting schedule in response to client requests, and broadcasts video seg-ments according to this schedule. This paper also evaluates the performance of FUVD on the basis of a simulation approach. The simulation results indicate that FUVD protocol shows a superior performance over UD, CBHD, and NPB in terms of the average response time.