• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.4
• /
• pp.336-342
• /
• 2012

Large-scale active solar heat systems are generally using heat exchanger between collector and storage tank loops to prevent damage by freezing. It is difficult to maintain stratification in a storage tank in the system owing to greater flow rate enhancing heat transfer. In the previous study, we introduced a spiral-jacketed storage tank and obtained good results to keep system performance of general level without better stratification. We added a scroll-shaped heat exchanger coil on the upper part in the spiral-jacketed storage tank. As a result of the experiment, it was verified that degree of stratification of the new type storage tank is higher than that of the previous one with a possibility of better collector efficiency and solar fraction.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.25 no.2
• /
• pp.92-101
• /
• 2002

The Job Shop Scheduling Problem(JSSP) is concerned with schedule of m different machines and n jobs where each job consists of a chain of operations, each of which needs to be processed during an uninterrupted time period of a given length on a given machine. The purpose of this paper is to develop the efficient heuristic method for solving the minimum makespan problem of the large scale job shop scheduling. The proposed heuristic method is based on a Tabu Search(TS) and on a Constraint Satisfaction Technique(CST). In this paper, ILOG libraries is used to embody the job shop model, and a CST is developed for this model to generate the increased solution. Then, TS is employed to overcome the increased search time of CST on the increased problem size md to refine the next-current solution. Also, this paper presents the new way of finding neighbourhood solution using TS. On applying TS, a new way of finding neighbourhood solution is presented. Computational experiments on well known sets of MT and LA problem instances show that, in several cases, our approach yields better results than the other heuristic procedures discussed In literature.

• Journal of the Korea Concrete Institute
• /
• v.11 no.3
• /
• pp.141-152
• /
• 1999

Precast prestressed double-tee slab may be designed by the PCI Design Handbook. It is based on the bridge construction and is required for reorganization for the use of buildings in the domestic construction environments. Much enhanced sections are developed from the reforming process on the determined design factors in the previous experimental works on double tees. Pre-determined shape, reinforcement detail, and 5000 psi concrete strength can not be expected as the best solution for the domestic construction requirements because large amount of use on that systems are anticipated. Flexural tests are performed on four full-scale 12.5m proto-type models, "least depth double tee", which are resulted from the optimization process. Domestic superimposed live load regulation, domestic material properties which is available to product, building design requirements and economy in construction are considered as the main factors to establish. the first two sections are double tee section for 1.2 ton/$\m^2$ market live load with straight and one-point depressed strands and the second two are for 0.6 ton/$\m^2$ parking live load with those strand types. All of the specimens tested fully comply with the flexural strength requirements as specified by ACI 318-95. However, the research has shown that following improved considerations are needed for better result in practice. The locations and method of connection for the lowest bottom mild bar, connection method between precast and cast-in-place concrete, and dap-end reinforcement are need to be improved.

• Journal of Communications and Networks
• /
• v.14 no.1
• /
• pp.51-62
• /
• 2012

The exponential growth in wireless services has resulted in an overly crowded spectrum. The current state of spectrum allocation indicates that most usable frequencies have already been occupied. This makes one pessimistic about the feasibility of integrating emerging wireless services such as large-scale sensor networks into the existing communication infrastructure. Cognitive radio is an emerging dynamic spectrum access technology that can be used for flexibly and efficiently achieving open spectrum sharing. Cognitive radio is an intelligent wireless communication system that is aware of its radio environment and that is capable of adapting its operation to statistical variations of the radio frequency. In ad hoc cognitive radio networks, a common control channel (CCC) is usually used for supporting transmission coordination and spectrum-related information exchange. Determining a CCC in distributed networks is a challenging research issue because the spectrum availability at each ad hoc node is quite different and dynamic due to the interference between and coexistence of primary users. In this paper, we propose a novel CCC selection protocol that is implemented in a distributed way according to the appearance patterns of primary systems and connectivity among nodes. The proposed protocol minimizes the possibility of CCC disruption by primary user activities and maximizes node connectivity when the control channel is set up. It also facilitates adaptive recovery of the control channel when the primary user is detected on that channel.

• Smart Structures and Systems
• /
• v.12 no.3_4
• /
• pp.235-250
• /
• 2013

Optimal sensor placement (OSP) technique plays a key role in the structural health monitoring (SHM) of large-scale structures. According to the mathematical background and implicit assumptions made in the triaxial effective independence (EfI) method, this paper presents a novel multi-dimensional OSP method for the Canton Tower focusing on application demands. In contrast to existing methods, the presented method renders the corresponding target mode shape partitions as linearly independent as possible and, at the same time, maintains the stability of the modal matrix in the iteration process. The modal assurance criterion (MAC), determinant of the Fisher Information Matrix (FIM) and condition number of the FIM have been taken as the optimal criteria, respectively, to demonstrate the feasibility and effectiveness of the proposed method. Numerical investigations suggest that the proposed method outperforms the original EfI method in all instances as expected, which is looked forward to be even more pronounced should it be used for other multi-dimensional optimization problems.

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.3
• /
• pp.245-252
• /
• 2020

It is very important to evaluate on/off-line stability to operate the power system stably and economically. Until now, we have continuously secured the operation reliability of the power system through the evaluation of transient, voltage and small signal stability. This paper proposes that it is possible to operate in KWAMS by applying the multi-section analysis and subspace methods and verifying the reliability of the algorithms to directly estimate the dominant oscillation mode of the power system from the signal waveform acquired from the phasor measurement units. In addition, this paper shows that the dominant oscillation mode can be detected from real-time measurement data in power systems. Therefore, if we can monitor the state of the power system in real time, it is possible to avoid a large-scale power outage by knowing the possibility of the power system accident in advance.

• Journal of Electrical Engineering and Technology
• /
• v.2 no.1
• /
• pp.10-18
• /
• 2007

The importance of conducting necessary studies on grid reliability evaluation has become increasingly important in recent years due to the number of blackout events occurring throughout the world. Additionally, quantitative evaluation of transmission system reliability is very important in a competitive electricity environment. The reason behind this is that successful operation of an electric power company under a deregulated electricity market depends on transmission system reliability management. The results of many case studies for the Korea Electric Power Cooperation (KEPCO) system using the Transmission Reliability Evaluation for Large-Scale Systems (TRELSS) Version 6.2 are illustrated in this paper. The TRELSS was developed by EPRI and Southern Company Services Inc. This paper presents the reliability analysis of KEPCO system expansion planning by using the TRELSS program.

• Industrial Engineering and Management Systems
• /
• v.15 no.1
• /
• pp.92-98
• /
• 2016

Due to the large scale of Antarctic science, scientific collaboration is required for conducting scientific research. In this study, we attempted to investigate collaboration network and the role of research station in Antarctic science based on bibliometric data from 1995 to 2014. We confirmed that geographical proximity tends to be important for scientific collaboration by employing community detection in the network. This result raises the question about what the role of research station in Antarctica is. We tried to reveal its role by focusing on five countries, Belgium, China, Czech Republic, India, and Korea that constructed new research stations during the last decade. Relative growth rate, a value to measure the growth of publications, didn't differ much around the construction period compared to those in other periods for these countries except Belgium. However, we found geographical keywords emerged around the construction for all five countries. These keywords were utilized to observe national research activities in Antarctica. They show where countries started to be concerned about after the construction.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.4
• /
• pp.381-389
• /
• 2012

In the existing naval combat system, integrated management is done based on subsystems that make up the system. The naval combat system, however, is a large-scale distributed system made up of subsystems of diverse heterogeneous environments. Although each of the subsystems can be easily managed because they are on the same platform, it is extremely difficult to integrate and manage as a single entity all subsystems that make up the naval combat system because the heterogeneous environments and distributed systems have to be taken into account. In fact, there hasn't been a technique available to integrate and manage subsystems that make up the naval combat system, until now. In this paper, the architecture of an integrated management system is designed and implemented to provide the user with various services. Furthermore, a system that can manage subsystems of the naval combat system in an integrated way is developed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2272-2279
• /
• 2014

Mobile applications are software systems running on handheld devices, such as smartphones, PDAs, tablets and so on. The market of mobile application has rapidly expanded in the past few years. In this paper, we present a novel approach to track smartphone application usage from a event logs on the mobile device and analyzed both on client system and usage analysis server. We implemented our client system on Android device based usage analytics platform. Based on the analysis server system, we obtained over 47,000 user base, and we get the user's app usage informations on realtime. In this paper, we describe a large scale deployment-based research for a smartphone usage patterns and usage information visualization techniques.