• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.3
• /
• pp.291-300
• /
• 1999

멀티미디어 서비스환경에서는 수백에서 수천의 클라이언트들이 하나의 서버에 접속되기 때문에 서버 결합이 미치는 영향이 상당히 크다. 이러한 결함은 단지 서버 자체의 장애로 끝나는 것이 아니라 그로 인해 서비스 제공자들에게 유형.무형의 막대한 재산상의 피해를 가져올수 있다. 본 논문에서는 멀티미디어 서버를 구성하고 있는 자원(프로세서, 디스크, 네트워크)의 결함 발생을 고려한 큐잉 네트워크 모델을 개발하였다. 복수개의 M/M/1 큐를 큐잉 네트워크로 연결하여, 각 자원에 대한 접근 및 서비스를 모델링하였으며, 각 자원에서의 서비스 시간 지연 비율(큐의 응답시간)의 조정을 통해서, 서버 자원의 결함 발생을 고려하였다. 고객 도착률과 자원 고장률 변동에 대한 서버 자원의 이용률과 큐의 길이를 구하여 효율적인 시스템 구성 자원의 부분별 용량을 산정하였으며 , 또한 데이터 패킷 응답 시간 분포 및 고장률 변화에 따른 시스템의 신뢰도 수준을 계산하였다. 이와 같은 서비스 시스템 성능에 관련된 파라미터 분석을 통하여 멀티미디어 데이터 서비스 수준 (Quality of Service)에 중요한 영향을 미치는 서버 설계 요소를 파악하였고, 시뮬레이터 패키지를 활용한 모의 실험을 통하여 개발된 큐잉 네트워크 모델의 정확성을 검증하였다.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.39 no.2
• /
• pp.9-18
• /
• 1997

Abstract This paper presents a heuristic method for optimal design of water distribution system with multiple sources and potential links. In multiple source pipe network, supply rate at each source node affects the total cost of the system because supply rates are not uniquely determined. The Linear Minimum Cost Flow (LMCF) model may be used to a large scale pipe network with multiple sources to determine supply rate at each source node. In this study the heuristic method based on the LMCF is suggested to determine supply rate at each source node and then to optimize the given layout. The heuristic method in turn perturbs links in the longest path of the network to obtain the supply rates which make the optimal design of the pipe network. Once the best tree network is obtained, the frequency count of reconnecting links by considering link failure is in turn applied to form loop to enhance the reliability of the best tree network. A sample pipe network is employed to test the proposed method. The results show that the proposed method can yield a lower cost design than the LMCF alone and that the proposed method can be efficiently used to design irrigation systems or rural water distribution systems.

• Journal of the Korean Institute of Gas
• /
• v.17 no.1
• /
• pp.49-55
• /
• 2013

Large scale systems, the facilities for the production of power, gas and chemical, have the complex structures. Most systems require the high reliability for the improvement of process efficiency, but it is difficult to analyze the reliability of processes with complex structures. In this study, we investigated reliability path of chemical process with k-out-of-n system by reliability block diagram(RBD) and calculated the reliability of process through the failure enumeration method of reliability path. This method should help in analyzing the reliability of k-out-of-n system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.1
• /
• pp.48-54
• /
• 2004

Generally, structural optimization is carried out based on external static loads. All forces have dynamic characteristics in the real world. Mathematical optimization with dynamic loads is extremely difficult in a large-scale problem due to the behaviors in the time domain. In practical applications, it is customary to transform the dynamic loads into static loads by dynamic factors, design codes, and etc. But the optimization results with the unreasonably transformed loads cannot give us good solutions. Recently, a systematic transformation has been proposed as an engineering algorithm. Equivalent static loads are made to generate the same displacement field as the one from dynamic loads at each time step of dynamic analysis. Thus, many load cases are used as the multiple loading conditions which are not costly to include in modem structural optimization. In this research, the proposed algorithm is applied to the optimization of flexible multibody dynamic systems. The equivalent static load is derived from the equations of motion of a flexible multibody dynamic system. A few examples that have been solved before are solved to be compared with the results from the proposed algorithm.

• Earthquakes and Structures
• /
• v.12 no.1
• /
• pp.91-108
• /
• 2017

Superstructures and isolation systems of seismically isolated buildings located close to active faults may observe increased seismic demands resulting from long-period and high-amplitude velocity and displacement pulses existent in near-fault ground motions as their fundamental periods may be close to or coincident with these near-fault pulse periods. In order to take these effects into account, the 1997 Uniform Building Code (UBC97) has specified near-source factors that scale up the design spectrum depending on the closest distance to the fault, the soil type at the site, and the properties of the seismic source. Although UBC97 has been superseded by the 2015 International Building Code in the U.S.A., UBC97 near-source factors are still frequently referred in the design of seismically isolated buildings around the world. Therefore it is deemed necessary and thus set as the aim of this study to assess the necessity and the adequacy of near-source factors for seismically isolated buildings. Benchmark buildings of different heights with isolation systems of different properties are used in comparing seismic responses obtained via time history analyses using a large number of historical earthquakes with those obtained from spectral analyses using the amplified spectrums established through UBC97 near-source factors. Results show that near-source factors are necessary but inadequate for superstructure responses and somewhat unconservative for base displacement response.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.732-735
• /
• 2006

Downtown cities in Japan are facing sharp fall in customers and continued shut down of shops due to decrease of population, increase in family cars and flowing of customers into the suburban large-scale retail stores. Omura City in Nagasaki Prefecture, Japan is no exception to this. For the revitalization of the downtown, many actions have been taken to open the vacant shops. However, transportation problem is the most important one to be solved for the citizens including the elderly people having difficulty in movement. Accordingly, this study was aimed at the revitalization of the downtown by substantiality public transportation. We have attempted to develop routes from the view-point of convenience by using Analytic Hierarchy Process (AHP) and Geographic Information Systems (GIS). As a result of the study, we were able to select three bus transportation areas by incorporating qualitative factors into the analysis. Finally, the study concluded that, revitalization activities of the downtown city itself is required in addition to re-structuring of bus transportation system for the revitalization of the downtown city.

• Computational Structural Engineering
• /
• v.9 no.1
• /
• pp.141-149
• /
• 1996

Efficient approximate reanalysis techniques based on substructuring are presented. In most optimal design problems, the analysis precedure must be repeated many times. In particular, one of the main obstacles in the structural optimization systems is high computational cost and time required for the repeated analysis of large-scale structural systems. The purpose of this paper is to show how to evaluate efficiently the sturctural behavior of new designs using information from the previous ones, instead of the multiple repeated analysis of basic equations for successive modification in the optimal design. The proposed reanalysis method is a combined Taylor series expansion and reduced basis method based on substructuring. Several numerical examples illustrate the effectiveness of the method.

• International Journal of Fluid Machinery and Systems
• /
• v.2 no.3
• /
• pp.197-205
• /
• 2009

Since large-scale commercial wind turbine generator systems such as MW-class wind turbines are becoming widely operated, the vibration and distortion of the blade are becoming larger and larger. Therefore the soft structure design instead of the solid-design is one of the important concepts to reduce the structural load and the cost of the wind turbine rotors. The objectives of the study are development of the fluid-structure coupled analysis code and evaluation of soft rotor-blade design to reduce the unsteady structural blade load. In this paper, fluid-structure coupled analysis for the HAWT rotor blade is performed by free wake panel method coupled with hinge-spring blade model for the flapwise blade motion. In the model, the continuous deflection of the rotor blade is represented by flapping angle of the hinge with one degree of freedom. The calculation results are evaluated by comparison with the database of the NREL unsteady aerodynamic experiment. In the analysis the unsteady flapwise moments in yawed inflow conditions are compared for the blades with different flapwise eigen frequencies.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.2
• /
• pp.151-157
• /
• 2010

Rapid technological advances in the area of micro electro-mechanical systems (MEMS) have spurred the development of small inexpensive sensors capable of intelligent sensing. A significant amount of research has been done in the area of connecting large numbers of these sensors to create robust and scalable Wireless Sensor Networks (WSNs). The resource scarcity, ad-hoc deployment, and immense scale of WSNs make secure communication a particularly challenging problem. Since the primary consideration for sensor networks is energy efficiency, security schemes must balance their security features against the communication and computational overhead required to implement them. In this paper, we combine location information and probability to create a new security aware multipath geographic routing protocol. The implemented result in network simulator (ns-2) showed that our protocol has a better performance under attacks.

• Genomics & Informatics
• /
• v.1 no.2
• /
• pp.87-93
• /
• 2003

DNA microarray is currently the most prominent tool for investigating large-scale gene expression data. Different algorithms for measuring gene expression levels from scanned images of microarray experiments may significantly impact the following steps of functional genomic analyses. $Affymetrix^{(R)}$ recently introduced high-density microarrays and new statistical algorithms in Microarray Suit (MAS) version 5.0$^{(R)}$. Very high correlations (0.92 - 0.97) between the new algorithms and the old algorithms (MAS 4.0) across several species and conditions were reported. We found that the column-wise array correlations had a tendency to be much higher than the row-wise gene correlations, which may be much more meaningful in the following higher-order data analyses including clustering and pattern analyses. In this paper, not only the detailed comparison of the two sets of algorithms is illustrated, but the impact of the introducing new algorithms on the further clustering analysis of microarray data and of possible pitfalls in mixing the old and the new algorithms were also described.