• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.181-182
• /
• 2010

For real-time displacement monitoring of large-scale structures, the high-rate (>1 Hz) GPS data processing is necessary, which is not possible even for the scientific GPS data processing softwares. Since the baseline is generally very short in this case, most of the atmospheric effects are removed, resulting in the unknowns of position and integer ambiguity. The number of unknowns in real-time kinematic GPS positioning makes the positioning impossible with usual approach, thus two-step approach is tested in this study.

• Smart Structures and Systems
• /
• v.4 no.5
• /
• pp.667-684
• /
• 2008

Numerous devices exist for reducing or eliminating seismic damage to structures. These include passive dampers, semi-active dampers, and active control devices. The performance of structural systems with these devices has often been evaluated using numerical simulations. Experiments on structural systems with these devices, particularly at large-scale, are lacking. This paper describes a real-time hybrid testing facility that has been developed at the Lehigh University NEES Equipment Site. The facility enables real-time large-scale experiments to be performed on structural systems with rate-dependent devices, thereby permitting a more complete evaluation of the seismic performance of the devices and their effectiveness in seismic hazard reduction. The hardware and integrated control architecture for hybrid testing developed at the facility are presented. An application involving the use of passive elastomeric dampers in a three story moment resisting frame subjected to earthquake ground motions is presented. The experiment focused on a test structure consisting of the damper and diagonal bracing, which was coupled to a nonlinear analytical model of the remaining part of the structure (i.e., the moment resisting frame). A tracking indictor is used to track the actuator ability to achieve the command displacement during a test, enabling the quality of the test results to be assessed. An extension of the testbed to the real-time hybrid testing of smart structures with semi-active dampers is described.

• Smart Structures and Systems
• /
• v.7 no.3
• /
• pp.229-240
• /
• 2011

Recent developments in Smart Structures with very large scale embedded sensors and actuators have introduced new challenges in terms of data processing and sensor fusion. These smart structures are dynamically classified as a large-scale system with thousands of sensors and actuators that form the musculoskeletal of the structure, analogous to human body. In order to develop structural health monitoring and diagnostics with data provided by thousands of sensors, new sensor informatics has to be developed. The focus of our on-going research is to develop techniques and algorithms that would utilize this musculoskeletal system effectively; thus creating the intelligence for such a large-scale autonomous structure. To achieve this level of intelligence, three major research tasks are being conducted: development of a Bio-Inspired data analysis and information extraction from thousands of sensors; development of an analytical technique for Optimal Sensory System using Structural Observability; and creation of a bio-inspired decision-making and control system. This paper is focused on the results of our effort on the first task, namely development of a Neuro-Morphic Engineering approach, using a neuro-symbolic data manipulation, inspired by the understanding of human information processing architecture, for sensor fusion and structural diagnostics.

• New & Renewable Energy
• /
• v.17 no.3
• /
• pp.16-23
• /
• 2021

Recently, the Korean government announced a plan to activate renewable energies, with focus on clean energy sources such as solar and wind power as the core and the goal of achieving carbon neutrality by 2050. Unlike other photovoltaic (PV) systems, offshore PV installations are advantageous for large-scale expansion because of the ease of securing sites; they also enable lowering the power generation costs based on construction of large-scale power facilities of megawatt class or higher owing to low noise and landscape damage. However, any power generation should proceed with consideration of the special environmental conditions of the ocean. Above all, when installing large-scale facilities, it is important to reduce fluctuations of the structure and secure stability to actively respond to waves. This study is concerned with the development of a floating body technology that actively responds to waves so as to enable commercialization of offshore solar power. A unit platform for research and development on offshore PV generation was installed in the Saemangeum sea, and the structural fluctuations and stability were analyzed to ensure conformity with the major performance indicators.

• Structural Engineering and Mechanics
• /
• v.46 no.5
• /
• pp.735-753
• /
• 2013

The wind load is always the dominant load of cooling tower due to its large size, complex geometry and thin-wall structure. At present, when computing the wind-induced response of the large-scale cooling tower, the wind pressure distribution is obtained based on code regulations, wind tunnel test or computational fluid dynamic (CFD) analysis, and then is imposed on the tower structure. However, such method fails to consider the change of the wind load with the deformation of cooling tower, which may result in error of the wind load. In this paper, the analysis of the large cooling tower based on the iterative method for wind pressure is studied, in which the advantages of CFD and finite element method (FEM) are combined in order to improve the accuracy. The comparative study of the results obtained from the code regulations and iterative method is conducted. The results show that with the increase of the mean wind speed, the difference between the methods becomes bigger. On the other hand, based on the design of experiment (DOE), an approximate model is built for the optimal design of the large-scale cooling tower by a two-level optimization strategy, which makes use of code-based design method and the proposed iterative method. The results of the numerical example demonstrate the feasibility and efficiency of the proposed method.

• Fisheries and Aquatic Sciences
• /
• v.11 no.1
• /
• pp.50-60
• /
• 2008

Harmful algal blooms (HABs) of Cochlodinium polykrikoides frequently occur around the South Sea of Korea, causing. economic losses in coastal breeding grounds. HAB outbreak scale usually changes each year depending on physical, biological and environmental conditions. Relatively large-scale HABs occurred in 1995, 1997, 1999, 2001, 2002 and 2003 with respect to spatial scale, duration and maximum density. Considering HAB scale and temperature distributions around the South Sea, we found that low coastal temperatures in August correspond to enormous HAB outbreaks. Cold waters created by coastal upwellings around the southeastern coast of Korea also corresponded to these outbreaks. Serial oceanographic investigations in August in the South Sea revealed that sea surface temperature anomalies had distinctively negative values when large-scale HAB outbreaks appeared. With regard to temperature differences between the surface and the 30-m layer, there was a tendency for large-scale outbreaks when temperature gradients around the seasonal thermocline weakened.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.1
• /
• pp.308-318
• /
• 2015

In order to improve the competitiveness of Korean large purse seine fishery, the purpose of this study is to find out the problems and present the improvement of the production structure of Korean large purse seine fishery by comparing to the production structure of Norwegian purse seine fishery. Norwegian purse seine fishery has been operating labor and energy-saving systems through a single wire operation and avoiding fishing competition through the introduction of IVQ system with different types of fishing vessel and obtaining benefits from Leading fishery management integrated with fish pumps and cooling water systems. In contrast, our country has a large purse seine fishery issues such as high cost and low efficiency of production structures, the volatility of mackerel resources, the lack of leading fishery management after catching fishes, the reduction of fishing ground in accordance with the North East Asia EEZ system. To solve these problems, initiatives to improve the structure of our large purse seine fishery are as follows: First, Implementing the promotion of the effective immature fishes management and establishing Korea-China-Japan resource management system. Second, the promotion of reduction of fleet size, the review of possible single fishing operation, leading out to strengthen its competitiveness by switching to energy-efficient production systems through enhanced efforts at fisheries catches steps. Third, it is necessary to realize corporate through the diversification of business areas and the large-scale commercialization of production structure.

• Journal of the Korean Society of Safety
• /
• v.12 no.3
• /
• pp.120-131
• /
• 1997

This paper presents an approximate reanalysis methods of structures based on substructuring for an effective optimization of large-scale structural systems. In most optimal design procedures the analysis of the structure must be repeated many times. In particular, one of the main obstacles in the optimization of structural systems are involved high computational cost and expended long time in the optimization of large-scale structures. The purpose of this paper is to evaluate efficiently the structural behavior of new designs using information from previous ones, without solving basic equations for successive modification in the optimal design. The proposed reanalysis procedure is combined Taylor series expansions which is a local approximation and reduced basis method which is a global approximation based on substructuring. This technique is to choose each of the terms of Taylor series expansions as the basis vector of reduced basis method in substructuring system which is one of the most effective analysis of large -scale structures. Several numerical examples illustrate the effectiveness of the solution process.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.5
• /
• pp.58-64
• /
• 2002

Mirror surface finish of Si-wafers has been achieved by rotary in-feed machining with cup-type wheels in ELID grinding. But the diameter of the workpiece is limited with the diameter of the grinding wheel in the in-feed machining method. In this study, some finding experiments by the rotary surface grinding machine with straight type wheels were conducted, by which the possible grinding area of the workpiece is independent of the diameter of the wheels. For the purpose of investigating the grinding characteristics of large scale diametrical silicon wafer, grinding conditions such as rotation speed of grinding wheels and revolution of workpieces are varied, and grinding machine used in this experiment is rotary type surface grinding m/c equipment with an ELID unit. The surface ground using the SD8000 wheels showed that mirror like surface roughness can be attained near 2~6 nm in Ra.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.204-208
• /
• 1990

The digital instrumentation and control system for the large scale system like the power plant must have the form of the heirachical structure. Because most large scale system have many control and process signals and it is distributed in the vade region, it is necessary to partition them into several subsystems. Therefore, the role of SCS(Supervisory Control System) having the functions of controlling and monitoring for the status of subsystems is very important. In this paper, new SCS for the effective control of the large scale system is proposed.