• 한국미생물·생명공학회지
• /
• 제28권6호
• /
• pp.341-348
• /
• 2000

Selection of high producer strain, optimization of production medium and cultivation in bioreactor system were carried out in order to produce an antifungal substance, PAFS in large amounts which sources and 41 kinds of nitrogen sources, a synthetic medium consisting of fructose(70 g/1) and ammonium sulfate (10g/l) and a complex medium including galactose(30g/l), fructose(20g/l) and cottonseed flour(35g/l) were determined as opti-mized media for PAFS production. In bioreactor studies examining physiological characteristics of the pro- ducer microorganism with the complex medium, typical pattern of diauxic growth was observed as demonstrated by the result that fructose was not used before almost exhaustion on readily utilizable carbon source, galactose. When galactose was supplemented additionally during the fermentation period. PAFS pro-ductivity did no increases any more, indicating that large portion of the added galactose was used for cell growth instead of biosynthesis of the secondary metabolite. It was deduced that PAFS production could be enhananced by employing fed-batch operation in order to overcome the apparent phenomenon of catabolite repression and /or inhibition.

• 전기학회논문지
• /
• 제56권5호
• /
• pp.938-943
• /
• 2007

In this paper, we show that, in case of piezoelectric micropower generator, just replacing Schottky diodes in the bridge rectifier with ultra-low reverse leakage current diodes improves the mechanical-to-electrical energy conversion efficiency by more than 100%. Experimental and PSPICE simulation results show that, due to the ultra-low leakage current, the charging speed of the circuit employing PAD1 is higher than that of the circuit employing Schottky diodes and the saturation voltage of the circuit employing PAD1 is also higher. This study suggests that , when the internal impedance of source is very large (a few tens of $M{\Omega}$) such that maximum charging current is a few microamperes or less, in order to realize literally the energy scavenging system, ultra-low reverse leakage current diodes should be used for efficient energy conversion. Since low-level vibration is ubiquitous in the environment ranging from human movement to large infrastructures and the mechanical-to-electrical energy conversion efficiency is much more critical for use of these vibrations, we believe that the improvement in the efficiency using ultra-low leakage diodes, as found in this work, will widen greatly the application of piezoelectric micropower generator.

• Journal of Computing Science and Engineering
• /
• 제9권3호
• /
• pp.142-154
• /
• 2015

Fault localization techniques help locate faults in source codes by exploiting collected test information and have shown promising results. To precisely locate faults, the techniques require a large number of test cases that sufficiently exercise the executable statements together with the label information of each test case as a failure or a success. However, during the process of software development, developers may not have high-coverage test cases to effectively locate faults. With the test case generation techniques, a large number of test cases without expected outputs can be automatically generated. Whereas the execution results for generated test cases need to be inspected by developers, which brings much manual effort and potentially hampers fault-localization effectiveness. To address this problem, this paper presents a method to select a few test cases from a number of test cases without expected outputs for result inspection, and in the meantime selected test cases can still support effective fault localization. The experimental results show that our approach can significantly reduce the number of test cases that need to be inspected by developers and the effectiveness of fault localization techniques is close to that of whole test cases.

• 한국경영과학회지
• /
• 제29권4호
• /
• pp.41-60
• /
• 2004

A stream data is a data set that is accumulated to the data storage from a data source over time continuously. The size of this data set, in many cases. becomes increasingly large over time. To mine information from this massive data. it takes much resource such as storage, memory and time. These unique characteristics of the stream data make it difficult and expensive to use this large size data accumulated over time. Otherwise. if we use only recent or part of a whole data to mine information or pattern. there can be loss of information. which may be useful. To avoid this problem. we suggest a method that efficiently accumulates information. in the form of rule sets. over time. It takes much smaller storage compared to traditional mining methods. These accumulated rule sets are used as prediction models in the future. Based on theories of ensemble approaches. combination of many prediction models. in the form of systematically merged rule sets in this study. is better than one prediction model in performance. This study uses a customer data set that predicts buying power of customers based on their information. This study tests the performance of the suggested method with the data set alone with general prediction methods and compares performances of them.

• Journal of Astronomy and Space Sciences
• /
• 제20권4호
• /
• pp.403-416
• /
• 2003

There are common features, in both imaging surveys and image processing, between astronomical observations and remote sensing. Handling large amounts of data, in an easy and fast way, has become a common issue. Implementing pipeline software can be a solution to the problem, one which allows the processing of various kinds of data automatically. As a case study, the development of pipeline software for the EIS (European Southern Observatory Imaging Survey) is introduced. The EIS team has been conducting a sky survey to provide candidate targets to the 250 VLTs (Very Large Telescopes) observations. The survey data have been processed in a sequence of five major data corrections and reductions, i.e. preprocessing, flat fielding, photometric and astrometric corrections, source extraction, and coaddition. The processed data are eventually distributed to the users. In order to provide automatic processing of the vast volume of observed data, pipeline software has been developed. Because of the complexity of objects and different characteristic of each process, it was necessary to analyze the whole works of the EIS survey program. The overall tasks of the EIS are identified, and the scheme of the EIS pipeline software is defined. The system structure and the processes are presented, and in-depth flow charts are analyzed. During the analyses, it was revealed that handling the data flow and managing the database are important for the data processing. These analyses may also be applied to many other fields which require image processing.

• KIEAE Journal
• /
• 제10권4호
• /
• pp.45-50
• /
• 2010

This study for middle school facilities is second following the study of the energy consumption of primary school facilities. There is not on the analysis of the current energy usage for middle school facilities in nations to set goals of energy reduction. Therefore, The purpose of this study is to present various analysis result of energy consumption which is a statistical analysis of domestic middle school facilities in South Korea. As a consequence, each average energy consumption at the domestic middle school facilities analyzed as following after changing as unit 'kWh' only for comparison with every energy source. It represents that the energy consumption of electric power was 183.7MWh(70.2%), gas consumption for heating was 46.5MWh(17.8%), oil consumption was 26.5MWh(10.1%), district energy was 5.1MWh(1.9%). This result describes that consumption of electric power was large greatly and it reflects the expectation that it will climb the demand regarding this energy in the future. In additionally, it analyzed average energy consumption with $74.4kWh/m^2$ by the unit area of air-conditioning and the district which has large energy consumption was Seoul with $91.6kWh/m^2$.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권1호
• /
• pp.24-29
• /
• 2000

We propose a simple method to control the crystallization depth of amorphous silicon (a-Si) deposited by PECVD or LPCVD during the excimer laser annealing (ELA). Employing the new method, we have formed poly-Si/a-Si double film and fabricated a new poly-Si TFT with vertical a-Si offsets between the poly-Si channel and the source/drain of TFT without any additional photo-lithography process. The maximum leakage current of the new poly-Si TFT decreased about 80% due to the highly resistive vertical a-Si offsets which reduce the peak electric field in drain depletion region and suppress electron-hole pair generation. In ON state, current flows spreading down through broad a-Si cross-section in the vertical a-Si offsets and the current density in the drain depletion region where large electric field is applied is reduced. The stability of poly-Si TFT has been improved noticeably by suppressing trap state generation in drain region which is caused by high current density and large electric field. For example, ON current of the new TFT decreased only 7% at a stress condition where ON current of conventional TFT decreased 89%.

• 정보처리학회논문지A
• /
• 제18A권4호
• /
• pp.123-128
• /
• 2011

본 논문은 원격지간의 연결된 대규모 분산 환경에서 데이터 분석 작업의 실행을 위해 필수적으로 고려되는 데이터 전송 부하를 감소시키는 기법을 제안한다. 계산 노드들이 밀집된 지역 인근에 다수의 데이터 노드를 배치시킴으로서 계산 노드들이 단일 데이터센터가 아닌 자신과 인접한 데이터 노드에 접근하여 작업을 수행함으로서 전송부하를 감소시키고 확장성을 증가시키는 것이 가능하다. 따라서 본 논문은 지역적으로 분산된 데이터 노드들의 데이터 처리율을 기반으로 실시간 데이터 공급을 수행함으로서 전송 지연을 최소화 할 수 있는 이론적인 모델과 시뮬레이션을 통한 성능 평가를 수행한다. 제안된 기법은 PRAGMA 그리드 테스트베드에서 실험을 통하여 성능의 우수성을 검증하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.417-420
• /
• 2006

In these days, mobile application dealing with information contents on mobile or handheld devices such as mobile communicator, PDA or WAP device face the most important industrial needs. The motivation of this study is the design and implementation of mobile application using high resolution satellite imagery, large-sized image data set. Although major advantages of mobile devices are portability and mobility to users, limited system resources such as small-sized memory, slow CPU, low power and small screen size are the main obstacles to developers who should handle a large volume of geo-based 3D model. Related to this, the previous works have been concentrated on GIS-based location awareness services on mobile; however, the mobile 3D terrain model, which aims at this study, with the source data of DEM (Digital Elevation Model) and high resolution satellite imagery is not considered yet, in the other mobile systems. The main functions of 3D graphic processing or pixel pipeline in this prototype are implemented with OpenGL|ES (Embedded System) standard API (Application Programming Interface) released by Khronos group. In the developing stage, experiments to investigate optimal operation environment and good performance are carried out: TIN-based vertex generation with regular elevation data, image tiling, and image-vertex texturing, text processing of Unicode type and ASCII type.

• 복식문화연구
• /
• 제21권1호
• /
• pp.139-150
• /
• 2013

Fast fashion companies have generated enormous amounts of clothing and large quantities of unsold or short-lived clothing end up in the landfill. As if to counter fast fashion, sustainable fashion has arisen for environmentally friendly garments at different levels from the fiber stage to production stage. However it is still fraught with uncertainty of systems in the industry. Therefore, this study proposed a system to create re-valued clothing from recycled garments for retailers. The target companies are large-sized retailers like Levi's, Polo, Gap, or J-Crew which are consistently producing basic items such as Levi's 501 or Classic Polo shirts with middle-prices. At the material stage, this study recommended additional requirements of designing a garment with a long life cycle based on criteria of an ideal garment developed by Patagonia clothing company. Then, this study explored innovative ways that retailers might connect with consumers to allow direct interaction between them in terms of the process of collecting used clothes. Using recycled clothing as a source material, this study strove to offer a process of redesign where the concept of 'waste to fashion' is developed as reconstructions where old forms are transformed into new ones.