• 반도체디스플레이기술학회지
• /
• 제14권3호
• /
• pp.13-22
• /
• 2015

LED (Light Emitting Diode) lighting is gaining more and more market penetration as one of the global warming countermeasures. LED is the next generation of fusion source composed of epi/chip/packaging of semiconductor process technology and optical/information/communication technology. LED has been applied to the existing industry areas, for example, automobiles, TVs, smartphones, laptops, refrigerators and street lamps. Therefore, LED makers have been striving to achieve the leading position in the global competition through development of core source technologies even before the promotion and adoption of LED technology as the next generation growth engine with eco-friendly characteristics. However, there has been a point of view on the cost compared to conventional lighting as a large obstacle to market penetration of LED. Therefore, companies are developing a Chip-Scale Packaging (CSP) LED technology to improve performance and reduce manufacturing costs. In this study, we perform patent analysis associated with Flip-Chip CSP LED and flow chart for promising technology forecasting. Based on our analysis, we select key patents and key patent players to derive the business strategy for the business success of Flip-Chip CSP PKG LED products.

• 한국정밀공학회지
• /
• 제24권6호
• /
• pp.113-120
• /
• 2007

Chemical vapor deposition (CVD) is one of the various synthesis methods that have been employed for carbon nanotube (CNT) growth. In particular, Ren et al reported that large areas of vertically aligned multi-wall carbon nanotubes could be grown using a direct current (dc) PECVD system. The synthesis of CNT requires a metal catalyst layer, etchant gas, and a carbon source. In this work, the substrates consists of Si wafers with Ni-deposited film. Ammonia $NH_3$) and acetylene ($C_2H_2$) were used as the etchant gases and carbon source, respectively. Pretreated conditions had an influence on vertical growth and density of CNTs. And patterned growth of CNTs could be achieved by lithographical defining the Ni catalyst prior to growth. The length of single CNT was increased as niclel dot size increased, but the growth rate was reduced when nickel dot size was more than 200 nm due to the synthesis of several CNTs on single Ni dot. The morphology of the carbon nanotubes by TEM showed that vertical CNTs were multi-wall and tip-type growth mode structure in which a Ni cap was at the end of the CNT.

• 한국지구과학회지
• /
• 제25권1호
• /
• pp.1-9
• /
• 2004

The clay minerals of thirty-four bottom sediments collected from the northwestern continental shelf of the East China Sea have been determined by X-ray diffraction analysis. The clay mineral distribution is mainly controlled by the sediment source and the dominant circulation pattern. The predominant clay mineral in our study area is illite comprising more-than 70% of whole clay fraction. The highest concentration of illite (>72%) is found in the southeastern offshore parts beyond the reach of terrigenous input from the Cheju Island. It means that these illites are largely transported by the Kuroshio Current from the South China Sea. Smectite is highly concentrated in the northwest middle part and in the outer-shelf mud patch. It seems to be due to the high supply of smectite transported from China where the fine-grained sediments are discharged from the modern and ancient Huanghe River. The relatively high abundance of kaolinite is likely derived from the Changjiang River via Taiwan ·Warm Current. In contrast, the large amounts of chlorite and high chlorite/kaolinite ratios occur in the northwestern are, reflecting the transportation by the Huanghai Sea Coastal Current from the southern Yellow Sea.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.172-178
• /
• 2003

As a typoon gets into harbour, a moored ships shows erratic motions and even mooring line failures is occurred. Such troubles may be caused by harbour resonance phenomena, result in large motion amplitudes at law frequency, which is closed to the natural frequency of the moored ship. The nonlinear motions of a moored ship beside quay are simulated under external forces due to wave, current including mooring forces in time domain. The forces due to waves are obtained from source and dipole distribution method in the frequency domain. The current forces are calculated by using slow motion maneuvering equation in the horizontal plane. The wind forces are calculated from emperical formula of ABS and the mooring forces of ropes and fenders are modeled as linear spring.

• 전력전자학회논문지
• /
• 제19권3호
• /
• pp.201-210
• /
• 2014

In this paper, dc-link voltage control of a grid-connected QZSI is presented. Since the input current of the ZSI is discontinuous, a capacity with relatively large capacitance should be connected to the output of the PV array in order to reduce the current ripple. Due to the presence of the impedance network inductor in series with the PV array, the QZSI can achieve continuous input current flow. Several dc-link voltage control methods are compared and the method for power quality improvement is also presented. The performance of the proposed method is verified through both simulation and experimental results.

• Environmental Engineering Research
• /
• 제15권1호
• /
• pp.29-33
• /
• 2010

In 2004, the Korean government launched comprehensive measures for nonpoint pollution that were intended to reduce their amount by 34.3% over of those forecast by 2020. During the first and second stages of their implementation; from 2004 to 2011, nonpoint source (NPS) measures have focused on systemic improvements and project management, as well as the introduction of optimal management techniques; accordingly, reductions have been small. However, during the third stage in 2011, serious reductions will be pursued. Accordingly, the gradual expansion of sites subject to NPS measures has focused on the establishment of a basis for reduction measures in connection with model projects during the first half of the plan, with full scale enforcement due in the second half. For Korea, rather than commencing NPS management en masse, it has been more appropriate to gradate NPS management into stages tailored to the different needs of new and existing businesses, as well as to the needs of large and small-scale businesses, in consideration of their specific circumstances. This has allowed sufficient time for such businesses to become accustomed to the concept of NPS management.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.75-76
• /
• 2007

Poly-Si Schottky barrier Thin Film Transistor (SB-TFT) is manufactured with erbium silicided source/drain. High quality poly-Si film was obtained by crystallizing the amorphous Si film with Excimer laser annealing (ELA) method. The fabricated poly-Si SB-TFT devices showed low leakage current and large on/off current ratio. Moreover, the electrical characteristics were considerably improved by 3% $H_2/N_2$ gas annealing, which is attributed to the reduction of trap states at the grain boundaries and interface trap states at gate oxide/poly-si channel.

• 동력기계공학회지
• /
• 제18권6호
• /
• pp.106-112
• /
• 2014

The diesel engine, which has high compression ratio than other heat engines, has been using as the main power source of marine transport. Especially, since marine diesel engines offer better specific fuel consumption (SFC), it is environment-friendly compared to those used in other industries. However, attentio should be focused on emissions such as nitrous oxide ($N_2O$) which is generated from combustion of low-grade fuels. Because $N_2O$ in the atmosphere is very stable, the global warming potential (GWP) of $N_2O$ is 310 times as large as that of $CO_2$, and it becomes a source of secondary contamination after photo-degradation in the stratosphere. It has been hitherto noted on the $N_2O$ exhaust characteristics from stationary power plants and land transportations, but reports on $N_2O$ emission from the marine diesel engine are very limited. In this experimental study, a author investigated $N_2O$ emission characteristics by using changed diesel fuel components of nitrogen and sulfur concentration, assessed on the factors which affect $N_2O$ generation in combustion. The experimental results showed that $N_2O$ emission exhibited increasement with increasing of sulfur concentration in fuel. However, all kinds of nitrogen component additives used in experiment could not change $N_2O$ emission.

• Journal of Microbiology
• /
• 제43권5호
• /
• pp.424-429
• /
• 2005

In previous studies, it has been reported that both S. enteritidis, the most common serotype, and S. enteritidis Phage Type 4 (SEPT 4) isolates were identified as the most prevalent PT in domestic poultry and also in humans in Korea until 2002. The aim of this study was to analyze the genetic diversity and epidemiological properties of both PT isolates, and also to trace the source of SEPT 4 isolates from domestic poultry and humans by Pulsed-field gel electrophoresis (PFGE). In order to understand the molecular epidemiologic properties of SEPT 4 isolates, which have very similar phenotypic properties to our preliminary investigations (serotyping, phage typing, large plasmids and antibiograms), PFGE analysis with XbaI enzyme was performed on the representative SEPT 4 isolates. Thirty-six SEPT 4 isolates were analyzed and differentiated with 10 pulsed-field profiles (PFP) expressing very high discriminative ability (SID: 0.921). In PFP, SEPT 4 isolates from human patients showed a perfect genetic match with those from broiler chickens and meats. Therefore, this study was able to successfully trace the major source of SEPT 4 isolates and also to determine the usefulness of the PFGE method for genetic analysis of epidemic strains.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 춘계 학술발표회논문집
• /
• pp.3-11
• /
• 2003

We analysed phases recorded by the M$_{L}$ 3.6 Cheolwon, Korea, earthquake occurred on the 10th of December, 2002 and computed source parameters such as hypocenter, origin time, earthquake magnitude and focal solutions. We used PmP and SmS phases to increase the accuracy in determinations of the hypocenter and origin time in addition to the phases such as Pg, Pn, Sg and Sn which are generally used in routine processes. The epicenter, depth, and origin time of the Cheolwon earthquake determined based on data of 11 stations within 200 km from the epicenter are 38.8108$^{\circ}$N, N, 127.2214'E, 11.955 km, and on 7:42:51.436. The earthquake magnitude obtained from all the stations is 3.6 M$_{L}$. The fault plane solution calculated based on data from 19 stations indicates slip process of a normal fault including strike-slip motion. The direction of compressional stress field has a large vertical component and a ESE-WNW direction of horizontal component, which is different from the mainly horizontal direction of main compressional stress field in the Korean Peninsula (ENE-WSW) obtained by previous studies.ies.s.