• Structural Engineering and Mechanics
• /
• 제73권6호
• /
• pp.651-666
• /
• 2020

In this study, the spatial variation mechanisms of large far-field earthquakes at engineering scales are first investigated with data from the 2008 Ms 8.0 Wenchuan earthquake. And a novel 'coherency cut-off frequency' is proposed to distinguish the spatial variations in ground motions in the low-frequency and high-frequency ranges. Then, a practical piecewise coherency model is developed to estimate and characterize the spatial variation in earthquake ground motions, including the effects of source-to-site distances, site conditions and neighboring topography on these variations. Four particular earthquake records from dense seismograph arrays are used to investigate values of the coherency cut-off frequency for different source-to-site distances. On the basis of this analysis, the model is established to simulate the spatial variations, whose parameters are suitable for both near- and far-field earthquake conditions. Simulations are conducted to validate the proposed model and method. The results show that compared to the existing models, the proposed model provides an effective method for simulating the spatial correlations of ground motions at local sites with known source-to-site distances.

• 한국의학물리학회지:의학물리
• /
• 제5권1호
• /
• pp.67-74
• /
• 1994

선량분포특성은 거리의 제곱에 반비례하기 때문에 근접조사에서 선원의 조그마한 오차는 선량계산에서 큰 차이를 초래할 수 있어서 선원의 정확한 거리 이동과 그에 따른 critical organ에 조사되는 선량의 정확도는 자궁경부암 환자의 치료성적에 결정적인 역할을 할 수가 있다. 특히 High Dose Rate의 RALS(Remote After Loading System)에서 선원의 정확한 calibration은 자궁경부암 환자의 치료에서 선량분포에 지대한 영향을 미치며 나아가 이 선량분포는 치료후 나타나는 재발 및 합병증이나 휴유증의 발생에도 큰 영향을 미치게 된다. 본 연구에서는 실제 RALS시 선원의 거리 이동을 측정하여 치료계획용 computer에서 계산된 선원간의 거리 이동과 비교 검토하였으며 Rectum 위치에 chamber를 삽입하여 실제 Rectum에 조사되는 선량과 computer에서 계산된 값들을 비교검토하였다. Tandem Source을 1cm 간격으로 거리를 이동하면서 실험을 되풀이 한 결과 처음 monitor로 1cm을 이동할 때 측정치가 0.8cm 이동한 것으로 나타났으며, 2번째부터 5번째까지의 거리 이동에서는 monitor의 값과 측정치의 값이 정확하게 일치하였다. 또한 12명의 환자를 대상으로 실시한 Rectum dose의 측정치는 computer계산치보다 평균 8%로 낮게 나타났다.

• 한국공간정보시스템학회 논문지
• /
• 제11권2호
• /
• pp.27-33
• /
• 2009

The emergences of GeoSensor and researches about GIS have promoted many researches of u-GIS. The disaster application coupled in the u-GIS can apply to monitor accident area and to prevent spread of accident. The application needs the u-GIS DSMS technique to acquire, to process GeoSensor data and to integrate them with GIS data. The u-GIS DSMS must process big and large-volume data stream such as spatial data and multimedia data. Due to the feature of the data stream, in u-GIS DSMS, query processing can be delayed. Moreover, as increasing the input rate of data in the area generating events, the network traffic is increased. To solve this problem, in this paper we describe TRIGGER ACTION clause in CQ on the u-GIS DSMS environment and proposes data source management. Data source weight table controls GES information and incoming data rate. It controls incoming data rate as increasing weight at GES of disaster area. Consequently, it can contribute query processing rate and accuracy

• 한국농공학회지
• /
• 제39권2호
• /
• pp.9-18
• /
• 1997

Abstract This paper presents a heuristic method for optimal design of water distribution system with multiple sources and potential links. In multiple source pipe network, supply rate at each source node affects the total cost of the system because supply rates are not uniquely determined. The Linear Minimum Cost Flow (LMCF) model may be used to a large scale pipe network with multiple sources to determine supply rate at each source node. In this study the heuristic method based on the LMCF is suggested to determine supply rate at each source node and then to optimize the given layout. The heuristic method in turn perturbs links in the longest path of the network to obtain the supply rates which make the optimal design of the pipe network. Once the best tree network is obtained, the frequency count of reconnecting links by considering link failure is in turn applied to form loop to enhance the reliability of the best tree network. A sample pipe network is employed to test the proposed method. The results show that the proposed method can yield a lower cost design than the LMCF alone and that the proposed method can be efficiently used to design irrigation systems or rural water distribution systems.

• Journal of Plant Biotechnology
• /
• 제7권2호
• /
• pp.123-127
• /
• 2005

The evaluation of source potential and sink strength is the generally large and laborious sample size required to adequately assess anyone of the parameters in field-grown sweetpotato. For this purpose we used the rooted single-leaf cuttings with petioles, because the source and sink organs are restricted in this system. The rooted single-leaf cutting of sweetpotato provides a unique source-sink model system, and is established within about 50 days after planting. In this study, the sink potential of sweetpotato tubers was examined based on the expression of genes for starch synthesis (AGPase) and modification (SBEII and GBSSI) in single rooted leaf plant. The gene expression patterns of GBSSI, SBEII and AGPase at various developmental stages and in different types of root tissues presented. These results suggest that the rooted single-rooted method can be used an ideal model system to study physiological and biochemical mechanisms in sweetpotato.

• 대한의용생체공학회:의공학회지
• /
• 제15권1호
• /
• pp.71-76
• /
• 1994

단일 쌍극자 모델을 이용한 source localization 문제에서 전극의 갯수, 쌍극자의 위치 및 방향 등이 S/N(signal to noise ratio)과 추정 오차사이의 관계에 미치는 영향을 Monte Carlo 시뮬레이션으로 조사했다. forward problem은 3중 구각 모델로 계산했고, simplex 방법으로 쌍극자 파라미터를 최적화시켰다. 전극의 갯수가 많을때, 쌍극자가 뇌 중심(midbrain)보다 대뇌 피질(cortex)부근에 있을 때, 쌍극자가 tangential 방향일 때 추정 오차의 평균과 표준편차가 작아졌다.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2007년도 추계 종합학술대회 논문집
• /
• pp.381-385
• /
• 2007

현재 270개 이상의 학회에 설치된 온라인논문투고관리시스템 KISTI-ACOMS는 개발 당시 예상에 비하여 훨씬 빠른 속도로 설치 학회 수가 늘어남으로 인하여 많은 양의 소스 코드를 관리하기가 점점 어려워지고 있다. 또한 이 프로그램의 본질적 특성상 빈번하게 학회에서 들어오는 수정 요구에 의한 소스 코드의 수정은 체계적인 프로그램 관리를 더욱 어렵게 한다. 이에 KISTI에서는 여러 학회의 서비스를 한 버전의 소스 코드로 통합 관리하는 체계를 고안하였으며 이 시스템의 개발로 유지/보수 측면에서 관리해야 할 소스 코드의 양이 대폭 줄어들 뿐 아니라 기존에 비하여 사용자들의 요구사항에 대하여 훨씬 능동적인 대처가 가능해질 것이다.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
• /
• pp.352-355
• /
• 2000

Production of pullulan by Aureobasidium pullulans HP-2001 with agro-industrial byproducts was investigated. Agro-industrial byproducts from the rice processing industry for the traditional Korean food (AIB-A), apple juice production (AIB-B), and soybean sauce production (AIB-C) were used for carbon and nitrogen source for production of pullulan. Major components of AIB-A were glucose, maltose, maltotriose, and dextran. AIB-A and B were found to be good substitute to glucose as carbon source. Productivity of pullulan with AIB-A and B as carbon source was similar to that glucose. Molecular weight of pullulan produced with AIB-A and B was higher than that with glucose. Major components of AIB-B and C were carbohydrate, protein, fat and ash. AIB-C was also a good substitute to yeast extract as nitrogen source. Some of physiological conditions were examined for the large scale production of pullulan.

• 전자공학회논문지A
• /
• 제28A권1호
• /
• pp.40-45
• /
• 1991

It is well known that the conventional differential source-coupled pair uses gates as its input terminals. This input pair provids a high open-loop gain, a large CMRR, and a good PSRR. For these reasons, the input pair has been used widely as an input stages of the differential amplifiers, but a narrow linear input range of this structurelimits its application in the area of some analog circuit design. A novel CMOS source-coupled backgate pair is proposed in this paper. The bulk of MOSFET is exploited and input devices are biased to operate in ohmic region. With this topology, the backgate pair of the wide linear input range and variable transconductance can be obtained. This backgate input differential stage is realized with the size of W/L=50/25 MOSFETs. The results show the nonlinear error is less than $\gamma$1% over 10V full-scale range for the bias current of 200$\mu$A with 10V single power-supply.

• 한국환경과학회지
• /
• 제4권5호
• /
• pp.75-75
• /
• 1995

In order to provide for the guidance on groundwater quality monitoring network design and also, to suggest the index to the solution of the contaminated groundwater remediation problems in the lake watershed, it is necessary to analyze the contaminant transport in the groundwater. The solute transport was analyzed in the lake watershed to investigate the behavior of the injected contaminant sources depend on the relationships between the point of contaminant sources and position of the lake. Three hypothetical groundwater flow systems, which is composed of a flow-through lake and two solute sources, were considered. The lakes located in the upper, middle, and lower portions of a watershed respectively. The transported contaminant was numerically simulated for five years by using MT3D contaminant transport model under the three-dimentional steady state conditions. From the above simulations, it can be concluded that the contaminant concentration was high as the contaminant source located at the upper position of a watershed, and the influence of the contaminant injection was large as the solute source located at the lower position. When the injection of contaminant was continued for one year without regard to the position of contaminant source and the lake, the influence of contaminant source was reached to bedrock.