• Journal of Environmental Policy
• /
• v.8 no.3
• /
• pp.27-51
• /
• 2009

This study looked for ways to carry out development projects in a sustainable manner by generating improvement plans, and focused on reviewing the status and problems associated with the environmental and ecological planning that is currently applied to new town and large-scale development projects. Improved methods were suggested based on differences between urban development and housing development projects. Based on principles set for the introduction of environmental and ecological planning, the size of the projects subject to environmental and ecological planning was set. With regard to the procedural improvements for environmental and ecological planning, nine problems were singled out from the development planning phases. Solutions were suggested by separating the problems into the site and district designation phase, development planning phase, implementation planning phase, and post-management phase based on a literature review and the opinion of experts. In consideration of improvements to the planning system, the scope of environmental and ecological planning was set after looking at information related to environmental and ecological planning, literature review, expert interviews, and the relevance of related plans. The scope of the environmental and ecological planning was divided into the overview of planning, environmental and ecological conception, conception of spatial structure and framework, and urban environment regeneration and impact reduction plans. By synthesizing the above-described results, the functions of environmental and ecological planning, development planning, and environmental assessment and their inter-relations were defined. The defined inter-relations seem likely to be developed into a form that would enable sustainable land development.

• Preventive Nutrition and Food Science
• /
• v.12 no.1
• /
• pp.35-39
• /
• 2007

This study was conducted to investigate the effects of soil selenium (Se) supplementation level on Se contents of green tea and milk vetch. Four different concentrations of sodium selenite ($Na_2SeO_3$) solutions (0.0, 3.3, 33.0 and 165.0${\mu}g/mL$) were prepared and one liter of each solution was well mixed with 10 kg of compost (cowpea soil) to give four different levels of Se-containing soil: $T_1$, 0; $T_2$, 33; $T_3$, 330; $T_4$, and 1,650${\mu}g$/100 g soil. Green tea plants and milk vetch were individually cultivated in those soils for 60 days. Se contents of freeze-dried green tea leaves were 6.87, 10.40, 12.04, and 20.19 ${\mu}g/g$, respectively; all of which were significantly different (p<0.05) from the others except for $T_2$ and $T_3$. The results showed that Se-contents of green tea leaves were increased 1.5$\sim$2.9 times as the Se level in the soil increased. Regression equation between Se contents in green tea (Y) and soil Se supplementation level (X) was: Y=0.007X＋8.857. However, Se contents in the milk vetch were increased significantly (p<0.05) more with the same treatments $T_3$ (74 ${\mu}g/g$) and $T_4$ (187$\mu$g/g) in comparison to those at $T_1$ (5.0 ${\mu}g/g$) and $T_2$ (12.0$\mu$g/g). The increases ranged from approximately between 2.4 to 37.4 times that of the control group. Regression equation between Se contents in milk vetch (Y) and soil Se supplementation level (X) was: Y=0.1063X＋15.989. The large difference of Se contents between green tea leaves and milk vetch would be attributed by the difference of protein contents between the 30% or higher protein-content of legumes and 15$\sim$20% protein of shrubs. The present study clearly indicates that green tea leaves and milk vetch can be enriched in selenium by supplementing the soil with Se. Therefore, Se-enriched green tea or milk vetch powder could be utilized as functional foods in Se-fortified green tea drinks or salads, or as food additives to enhance the daily intake of Se.

• Journal of Digital Convergence
• /
• v.12 no.10
• /
• pp.97-108
• /
• 2014

The purpose of this study was to seek for solutions of activating convention hotels entering to the newly created market, focused on the case study of the convention hotel in KangwonLand in the competitive MICE environment. According to the analysis for reception setup for MICE, it is urgently required to improve shopping facilities, securing manpower, the accessibilities in KangwonLand convention hotel. This study suggests several ways to identify differentiation such as facilities discriminations, reasonable prices when holding conventions/events. It is also proposed that there is a need to focus incentive tour when marketing. To succeed in hosting events of MICE at the convention hotel, it appears to be considered to host large scale of domestic or overseas events, to measure reasonable room rates, promote niche market through middle or small scale events, attract customers to revisit and save transportation costs for participants. From the study, it is expected to find efficient ways to activate convention hotels through MICE market entry.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.2
• /
• pp.161-177
• /
• 2017

This paper presents the design considerations and field applications on inflatable structure system to protect rapidly flooding damages in large section tunnel. This inflatable structure system is very valuably used to protect passively and rapidly the possibilities of tunnel damages by flooding threats and unusual leakage to be occurred during and after underground infrastructure. In particular, this system should be necessary in subsea tunnel. The predominant factors in the design of inflatable structure system are the leakage and friction characteristics between the inflater and tunnel liner. The analytical and experimental studies are performed to develop the design considerations and to examine the design parameters of the inflatable structure system. The analytical solutions are developed using membrane theory to suggest the design considerations. The relative friction tests of several fabric materials are also carried out to determine the friction characteristics according to the different friction conditions between inflater and tunnel surface. The test results show that the friction coefficients in wet surface condition are about 20% lower than the values in dry surface condition. In addition, virtual design of tunnel protection system for two virtual subsea tunnel sites which is under reviewing in Korea, is carried out based on this research. It is expected that the results of this research will be very useful to understand the inflater structure design and development the technology of tunnel protection structures in the future.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.7 s.349
• /
• pp.93-103
• /
• 2006

Network solutions for protecting against worm attacks that complement partial end system patch deployment is a pressing problem. In the content-based worm filtering, the challenges focus on the detection accuracy and its performance enhancement problem. We present a worm filter architecture using the bloom filter for deployment at high-speed transit points on the Internet, including firewalls and gateways. Content-based packet filtering at multi-gigabit line rates, in general, is a challenging problem due to the signature explosion problem that curtails performance. We show that for worm malware, in particular, buffer overflow worms which comprise a large segment of recent outbreaks, scalable -- accurate, cut-through, and extensible -- filtering performance is feasible. We demonstrate the efficacy of the design by implementing it on an Intel IXP network processor platform with gigabit interfaces. We benchmark the worm filter network appliance on a suite of current/past worms, showing multi-gigabit line speed filtering prowess with minimal footprint on end-to-end network performance.

• Journal of the Korean Dietetic Association
• /
• v.20 no.3
• /
• pp.183-198
• /
• 2014

The purpose of this study was to investigate the status of clinical nutrition services provided at tertiary hospitals and general hospitals in Korea. In total, 157 questionnaires were distributed to the departments of nutrition at hospitals on September 2013. The results of this study are as follows. The median number of beds was 607 and average length of stay was 8 days. 63.1% of dietitians had over 5 years of career experience. Nutritional screening rate was 97% in tertiary hospitals but only 67.2% in general hospitals (P<0.001). The rate of equipment with computerized nutritional screening system was 100% in tertiary hospitals but 71.9% in general hospitals (P<0.001). Hospitals with the best regarding nutritional care were hospitals accredited by JCI (Joint Commission International). On the other hand, hospitals not accredited by the JCI but KOIHA (Korea Institute for Healthcare Accreditation) showed the lowest performance rate of nutritional care. Nutrition support teams (NSTs) were established in all tertiary hospitals but in only 73% of general hospitals (P<0.001). The rate of actively operating NSTs was 89% in tertiary hospitals but only 62% in general hospitals (P<0.001). There is a need to provide proper standardized clinical nutrition services as a primary treatment and we observed large variations in the quality of nutritional service between hospitals. Therefore, local solutions are needed to implement nutritional programs and policies for improved service and care.

• Corrosion Science and Technology
• /
• v.9 no.6
• /
• pp.276-280
• /
• 2010

Copper(Cu) as an interconnecting metal layer can replace aluminum (Al) in IC fabrication since Cu has low electrical resistivity, showing high immunity to electromigration compared to Al. However, it is very difficult for copper to be patterned by the dry etching processes. The chemical mechanical polishing (CMP) process has been introduced and widely used as the mainstream patterning technique for Cu in the fabrication of deep submicron integrated circuits in light of its capability to reduce surface roughness. But this process leaves a large amount of residues on the wafer surface, which must be removed by the post-CMP cleaning processes. Copper corrosion is one of the critical issues for the copper metallization process. Thus, in order to understand the copper corrosion problems in post-CMP cleaning solutions and study the effects of DC biases and post-CMP cleaning solution concentrations on the Cu film, a constant voltage was supplied at various concentrations, and then the output currents were measured and recorded with time. Most of the cases, the current was steadily decreased (i.e. resistance was increased by the oxidation). In the lowest concentration case only, the current was steadily increased with the scarce fluctuations. The higher the constant supplied DC voltage values, the higher the initial output current and the saturated current values. However the time to be taken for it to be saturated was almost the same for all the DC supplied voltage values. It was indicated that the oxide formation was not dependent on the supplied voltage values and 1 V was more than enough to form the oxide. With applied voltages lower than 3 V combined with any concentration, the perforation through the oxide film rarely took place due to the insufficient driving force (voltage) and the copper oxidation ceased. However, with the voltage higher than 3 V, the copper ions were started to diffuse out through the oxide film and thus made pores to be formed on the oxide surface, causing the current to increase and a part of the exposed copper film inside the pores gets back to be oxidized and the rest of it was remained without any further oxidation, causing the current back to decrease a little bit. With increasing the applied DC bias value, the shorter time to be taken for copper ions to be diffused out through the copper oxide film. From the discussions above, it could be concluded that the oxide film was formed and grown by the copper ion diffusion first and then the reaction with any oxidant in the post-CMP cleaning solution.

• Journal of the Korea Computer Graphics Society
• /
• v.21 no.1
• /
• pp.1-11
• /
• 2015

Researchers have developed virtual reality environments to provide audience with more visually immersive experiences than previously possible. One of the most popular solutions to build the immersive VR space is a multi-projection technique. However, utilization of multiple projectors requires large spaces, expensive cost, and accurate geometry calibration among projectors. This paper presents a novel omnidirectional projection system with a single projector and a single spherical mirror.We newly designed the simple and intuitive calibration system to define the shape of environment and the relative position of mirror/projector. For successful image projection, our optimized omnidirectional image generation step solves image distortion produced by the spherical mirror and a calibration problem produced by unknown parameters such as the shape of environment and the relative position between the mirror and the projector. Additionally, the focus correction is performed to improve the quality of the projection. The experiment results show that our method can generate the optimized image given a normal panoramic image for omnidirectional projection in a rectangular space.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.5
• /
• pp.305-309
• /
• 2000

Ultra-drying [＜5.0% seed moisture content (SMC)] storage technique is a cost-effective storage method for oily seeds. To decide proper ultra-drying condition for soybean seeds, drying rate was compared three silica gel to seed ratios, two seed sizes with varietal difference, two kinds of container, and three seed amounts per container under :t 23$\pm$1$^{\circ}C$. When the relative humidity (RH) was reduced at the rate of less than 0.1 % a day, silica gel was replaced with dry one by 47 days. Higher silica gel to seed ratios (3:1 and 2:1) dried faster than lower ratio (1:1) until 28 days, but not after 43 days of drying. Also, large seeded variety was dried faster than small seeded variety. Kinds of container and seed amounts per container didn't show differences in drying of soybean seeds. After completion of ultra-drying, percentage germination by standard germination test (SGT) was not different among silica gel to seed ratios, kinds of container, and seed amounts per container, except among seed sizes (varieties). Before SGT, soybean seeds were premoistened using saturated ${CaCl}_2$ for 48 hours and ${NH}_4$Cl for 24 hours in desiccators. To compare germinability between ordinary-dried seeds and ultra-dried seeds, the seeds of seven soybean varieties, which were varying in size from 8.1 to 34.9 g per 100 seeds, were dried using same amount of silica gel under 23$\pm$1$^{\circ}C$. After completion of 76 days of drying, SMCs were reduced to 3.13-3.45% from 7.86-8.82%. SMC after completion of drying was not correlated with 100-seed weight (r=0.556). Before germination tests, soybean seeds were premoistened using saturated salt solutions. Percentage germination was higher with ultra-dried seeds than ordinary-dried seeds in SGT and higher with ordinary-dried seeds than ultra-dried seeds in AAT at the beginning of storage and after 6 months storage, but general trend of percentage germination was not observed among varieties classified by 100-seed weight. From these results, we concluded that further studies are needed to improve ultra-drying storage method for soybean seeds.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.8
• /
• pp.1581-1588
• /
• 2017

Recently, circulating ransomware is becoming intelligent and sophisticated through a spreading new viruses and variants, targeted spreading using social engineering attack, malvertising that circulate a large quantity of ransomware by hacking advertising server, or RaaS(Ransomware-as-a- Service), from the existing attack way that encrypt the files and demand money. In particular, it makes it difficult to track down attackers by bypassing security solutions, disabling parameter checking via file encryption, and attacking target-based ransomware with APT(Advanced Persistent Threat) attacks. For remove the threat of ransomware, various detection techniques are developed, but, it is very hard to respond to new and varietal ransomware. Accordingly, in this paper, find out a making Signature-based Detection Patterns and problems, and present a pattern automation model of ransomware detecting for responding to ransomware more actively. This study is expected to be applicable to various forms in enterprise or public security control center.