• 상하수도학회지
• /
• 제28권6호
• /
• pp.681-690
• /
• 2014

It is known that sewer problems are the major causes of road cave-in. The objective of this study is to analyze the risk of road cave-in due to storm sewer laterals. We investigated 174 storm sewer laterals using a zoom camera at O-dong area in Seoul. The causes of road cave-in were classified into five cases: breakage of rigid pipe, deformation of flexible pipe, out of pipeline alignment, changing pipe material or changing pipe diameter, and a poor linkage between lateral and sewer. In addition, all defects were sorted into five grades based on the severity rating at storm sewer laterals. In this study, the most fragile pipe materials were found to be concrete pipe and polyethylene pipe, which recorded 2.3 and 1.69 defect rates. With regard to the causes of road cave-in, deformation of flexible pipe has a large influence on road cave-in at present. On a long-term basis, the two causes, out of pipeline alignment and a poor linkage between lateral and sewer, could have more influence on road cave-in.

• 한국가스학회지
• /
• 제2권2호
• /
• pp.61-69
• /
• 1998

본 연구에서는 파이프라인 가스 수송시에의 가스누출사고에 관하여 gaussian gas인 LNG의 경우 1994년 12월 아현동 지하공급기지 폭발사고와 heavy gas인 LPG의 경우 1995년 4월 대구지하철 공사장 폭발사고를 중심으로 고찰하였다. 즉, 밀폐공간에서의 가스 누출량을 계산하고 현장의 피해보고 결과를 토대로 폭발효율을 예측하였다. 또한, LNG와 LPG가 동일양의 가스가 개방계로 누출되었다고 가정할 때, ALOHA와 PHAST모델에 의해 그 피해를 예측한 결과는 대구 모델의 경우 LNG의 폭발한계 범위내의 확산면적은 LPG에 비해 약 15배정도 적은 것으로 계산되었고, 복사열 영향도 LNG가 LPG보다 그 영향이 작게 나타났다.

• 한국가스학회지
• /
• 제7권2호
• /
• pp.1-6
• /
• 2003

본 연구에서는 이미 개발되어 있는 부식결함의 잔존강도를 평가식을 이용하여 파단, 대누출, 소누출의 손상모드 예측하는 절차를 제시하였다. 또한 이 손상모드에 따라 손상확률을 예측할 수 있는 방법을 제시하고 여기에 부식속도 정보를 결합하면 일정기간 경과 후 손상확률도 예측할 수 있음을 보였다. 이 결과는 노후배관의 수명 또는 교체주기의 예측에 매우 유용하게 활용될 수 있을 것이라 판단된다.

• Nuclear Engineering and Technology
• /
• 제53권1호
• /
• pp.69-78
• /
• 2021

Venturi meter is frequently used in feed water flow control system in a nuclear power plant. Its accurate measurement plays a vital role in the safe operation of the plant. This paper firstly investigates the influence of the length of each section of pipeline, the throat inner diameter of Venturi and the flow characteristics in a single-phase flow on the accuracy of Venturi measurement by numerical calculation. Then the flow and the accuracy are discussed in a multi-phase flow. Numerical results show that the geometrical parameters and the characteristics of complex turbulent flow in the single-phase flow have little impact on the accuracy of Venturi flow rate measurement. In the multi-phase flow, the calculated flow rate of Venturi deviated from the actual flow rate and this deviation value is closely related to the amount of steam in the pipeline and increases sharply with the increase of the amount of steam. The over-reading of Venturi flow rate is present.

• Nuclear Engineering and Technology
• /
• 제54권3호
• /
• pp.888-895
• /
• 2022

Lately, ocean nuclear power plants have attracted attention as one of diverse uses of nuclear power plants. Because ocean nuclear power plants are movable or transportable, it is necessary to analyze the thermal hydraulics in a moving frame of reference, and computer codes have been developed to predict thermal hydraulics in large moving systems. The purpose of this study is to incorporate a three dimensional dynamic motion model into the SPACE code (Safety and Performance Analysis CodE) so that the code is able to analyze thermal hydraulics in an ocean nuclear power plant. A rotation system that describes three-dimensional rotations about an arbitrary axis was implemented, and modifications were made to the one-dimensional momentum equations to reflect the rectilinear and rotational acceleration effects. To demonstrate the code's ability to solve a problem utilizing a rotational frame of reference, code calculations were conducted on various conceptual problems in the two-dimensional and three-dimensional pipeline loops. In particular, the code results for the three-dimensional pipeline loop with a tilted rotation axis agreed well with the multi-dimensional CFD results.

• 한국산학기술학회논문지
• /
• 제20권12호
• /
• pp.730-736
• /
• 2019

친환경 에너지원으로 고려되고 있는 천연가스의 수요가 증가하고 있고 이와 동시에 천연가스의 공급을 위한 대규모 파이프라인의 시장 규모 또한 지속적으로 증가하고 있다. 하지만, 이러한 대규모 파이프라인의 부식은 천연가스 운송의 효율성을 저하시킨다. 이에 본 연구는 천연가스 공급용 대규모 파이프라인을 위한 에너지 자립형 고효율 부식방지 기술에 대한 특허의 정량분석을 통해 관련 기술의 특허권 확보을 위한 전략을 수립하는데 목적을 두고 있다. 본 특허 기술동향 조사에서는, 2018년 6월까지 출원, 공개 및 등록된 한국, 미국, 일본 및 유럽 특허를 대상으로 분석하였으며, 전문가토의를 거쳐 기술분류체계 및 분류기준을 마련하였다. 천연가스 대규모 파이프라인의 부식방지를 위한 외부전원으로 연료전지를 이용하기 위해, 1) 파이프라인의 분기 구조와 설비 설계(감압기/압축기/열교환기) 그리고 2) 고압 천연가스의 감압/예열과 가압/냉각 기술을 구비하는 에너지 제어 시스템 및 방법으로 권리화를 시도해 볼 수 있을 것으로 기대된다.

• 한국해양공학회지
• /
• 제34권3호
• /
• pp.194-201
• /
• 2020

In this study, an optical-fiber sensor was used to measure loads that could act in an environment similar to the loading conditions that exist in an actual pipe. The structure and the installation method of the optical-fiber strain sensor were applied considering the actual large pipe and the buried pipe environment. Load tests were performed using a displacement sensor and sandbags to determine the deflection of the pipe according to the external load, and the linear measurement results were verified. Considering the conditions that could exist in the actual pipe, the test method was presented, and the strain of the buried pipe generated at this time was measured.

• 한국정밀공학회지
• /
• 제5권2호
• /
• pp.33-42
• /
• 1988

In a large scale oil hydraulic system having repeatedly operated actuator, such as a large scale forging press, pressure surges often due to the recombination of oil column in a return line attached to the downstream side of a directional control valve. Expecially, the pressure surges appear very severe ones at a certain valve operating frequency. These pressure surges restrict the operating frequency of the hydraulic system. But related reports on the above mentioned phenomenon are rarely to be found. In this study, therefore, the authors investigate the exact reason why such severe pressure surges occur at a certain range of valve operating frequency. The study is performed by experiment and numerical computation on the relationship between pressure surges and valve operating frequency.

• 한국유체기계학회 논문집
• /
• 제14권3호
• /
• pp.5-9
• /
• 2011

Butterfly valves are widely used in current industry to control the fluid flow. They are used for both on-off and throttling applications involving large flows at relatively low pressure-drop especially in large size pipelines. In this study, we carried out the structure analysis of the butterfly valve components according to pressure testing of the industrial standard. the numerical simulation was performed by using ANSYS Workbench. The reliability of valve is evaluated under the investigation of the strain rate, the leak test and the durability of the valve.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.70-73
• /
• 2002

This paper describes the way to embody the grid coverage and the grid coverage processor which can construct pipelines. The pipeline constructed by the developed grid coverages has internal pipelines that have different resolution and it provides the way of access to very large datasets efficiently. Several operations, such as filtering, image enhancement and band operation, are embedded in the developed grid coverage and grid coverage processor COM components. The practical usefulness of the developed grid coverage and grid coverage processor has been proven by applying them in developing an image processing software for very large images.