• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.231-232
• /
• 2008

The coupling between electric, magnetic, and structural order parameters results in the so-called multiferroics, which possess ferroelectricity, ferromagnetism, and/or ferroelasticity. The simultaneous ferroelectricity and ferromagnetism (magnetoelectricity) allow potential applications in information storage, spintronics, and in magnetic or electric field sensors. Perovskite compound $BiFeO_3$ (BFO) is antiferromagnetic below Neel temperature of 647K and ferroelectric with a high Curie temperature of 1043K. It exhibits weak magnetism at room temperature(RT) due to the residual moment from a canted spin structure. It is likely that non-stoichiometry and second-phase formation are the factors which cause leakage in BFO. It has been suggested that oxygen non-stoichiometry leads to valence fluctuations of Fe ions in BFO, resulting in high conductivity. To reduce the large leakage current of BFO, one attempt is fabricating donor doped BFO compounds and thin films. We report here the successful fabrication of the Nd, Ti co-doped $BiFeO_3$ ceramics and thin films by pulsed laser deposition technique.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.286-289
• /
• 2004

This paper presents the fatigue characteristics of LIPCA (LIghtweight Piezo-Composite Actuator) device system. The LIPCA device system is composed of a piezoelectric ceramic layer and fiber reinforced lightweight composite layers. Typically a PZT ceramic layer is sandwiched by a top fiber layer with low CTE (coefficient of thermal expansion) and base layers with high CTE. The advantages of the LIPCA design are weight reduction by using the lightweight fiber reinforced plastic layers without compromising the generation of high force and large displacement and design flexibility by selecting the fiber direction and the size of prepreg layers. To predict the degradation of actuation performance of LIPCA due to fatigue, the cyclic electric loading tests using PZT specimens were performed and the strain for a given excitation voltage was measured during the test. The results from the PZT fatigue test were implemented into CLPT (Classical Laminated Plate Theory) model to predict the degradation of LIPCA's actuation displacement. The fatigue characteristic of PZT was measured using a test system composed of a supporting jig, a high voltage power supplier, data acquisition board, PC, and evaluated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 A
• /
• pp.276-278
• /
• 2001

In recent years, both electric utilities and end users have expressed their deep concerns about the quality of electric power. Especially, voltage sag which is one of power quality disturbance is very serious power quality problem on the power system. Voltage sag is a decrease to between 0.1 and 0.9 pu in rms voltage magnitude on the power system for durations from 0.5 cycles to 1 minute. These voltage sags are usually caused by fault conditions, overloads, and starting of large motors. The wavelet transform has attracted considerable attention in the field of power quality analysis recently. It has proved to be a powerful tool to study those transients that have time-localized information. In this paper, different types of voltage sags are simulated by using EMTP. This paper proposes the effective technique for voltage sag detection using wavelet transform.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 영호남 합동 학술대회 및 춘계학술대회 논문집 센서 박막 기술교육
• /
• pp.82-85
• /
• 2006

As a display becomes large recently, Acquisition of high luminance and Luminance uniformity is becoming difficult in the existing CCFL or EEFL backlight system. So, study for a performance enhancement has enforced. but lamp development of flat type is asked for high luminance and a luminance uniformity security in of LCD and area anger trend ultimately. In this paper, we changed a tip shape of an electrode for production by the most suitable LCD backlight surface light source, and confirmed discharge characteristic along discharge gas pressure and voltage, and confirmed electric field distribution and discharge energy characteristic through a Maxwell 2D simulation. Therefore the discharge firing voltage characteristic showed a low characteristic than a rectangular type and round type in case of electrode which used tip of a triangle type, and displayed a discharge electric current as a same voltage was low.

• 한국재료학회지
• /
• 제17권5호
• /
• pp.289-292
• /
• 2007

Although piezoelectric bimorph that is using as the sensor in medical and industrial measurement has large displacement, it has problems including efficiency in generating force, energy convergence, and response. Its application is being limited based on the change in resonance frequency with temperature. In this study, to overcome the disadvantages, PZT piezoelectric ceramics was prepared and produced a parallel type piezoelectric bimorphs. In addition, by using the finite element method. the configuration of piezoelectric bimorph was designed and the displacement of the bimorph based on applied electric pressure and the wave pattern were measured. By analyzing the resonance characteristics of the bimorph in the temperature range of $-60{\sim}80^{\circ}C$, an attempt was made to study the operational characteristics and temperature reliability of vortex flowmeter sensor. As a result, the resonance frequency of the bimorph was gradually increased with the temperature from $-60{\sim}80^{\circ}C$. The deflection of the bimorph was found to strongly depend on both the applied electric field waveform and the environmental temperature.

• 한국입자에어로졸학회지
• /
• 제9권4호
• /
• pp.231-238
• /
• 2013

Carbon nanotubes (CNTs) are one of the nanomaterials that were discovered by Iijima in 1991 for the first time. CNTs have long cylindrical and axi-symmetric structures. CNTs are made by rolling graphene sheets. Because of their large length-to-diameter ratio, they are called nanotubes. CNTs are categorized as single-walled carbon nanotubes (SWCNTs) or multi-walled carbon nanotubes (MWCNTs) based on the shell structures. CNTs are broadly used in various fields, such as scanning probe microscopy, ultra fine nano balance and medicine, due to their extraordinary thermal conductivity, electrical and mechanical properties. Because long, straight CNTs have the same shape as asbestos, which cause cancer in cells lining the lung, there have been many studies on the effects of MWCNTs on human health that have been conducted. Stable atomization of CNTs is very important for the estimation of inhalation toxicity. In the present study, electro-static assisted axial atomizer (EAAA), which is the instrument that uses MWCNTs and aerosolizes them by transforming the single fiber shape using ultrasonic dispersion and electric field, was invented. EAAA consists of a ultrasonic bath for dispersion of MWCNTs and a particle generator for atomizing single fibers. The performance evaluation was conducted in order to assess the possibilities of 6-hour straight atomization with stability, which is the suggested exposure time in a day for the estimation of inhalation toxicity.

• 한국산학기술학회논문지
• /
• 제7권3호
• /
• pp.344-349
• /
• 2006

[ $60{\sim}70nm$ ] 급의 design rule을 가진 고집적 반도체 소자를 제작하려면, 트랜지스터 형성 이후의 공정에서 thermal budget을 줄이기 위하여 공정의 온도를 낮추는 것이 중요하다. 본 연구에서는 고온의 습식 산화막을 대체할 수 있는 저온의 LPCVD (Low-Pressure Chemical Vapor Deposition) $SiO_2$(LTO : Low-Temperature Oxide) 박막 증착공정을 제시하였으며, ONO (Oxide/Nitride/Oxide) 구조의 커패시터를 형성하여 증착된 LTO 박막의 전기적인 신뢰성을 평가하였다. LTO 박막은 5 MV/cm 이하의 전기장 영역에서는 고온의 습식 산화막과 크게 차이가 없는 누설전류 특성을 보였으나, 더 높은 전기장의 영역에서는 훨씬 더 우수함을 보여주었다.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.363-368
• /
• 1999

Multiseeding 방법을 사용하여 Y-Ba-Cu-0 초전도_ 시료를 제조하였다. Multiseeding은 여러개의 종자를 동시에 사용함으로써 단시간에 큰 size의 시료를 제조하고자 하는 의도에서 시도되었다. 또한 field-cooled 상태에서 포획 자기장의 크기를 측정함으로써 입자간 결합 상태와 시료의 품질을 평가하였다. 일반적인 방법으로 제조할 경우 포획 자기장 값은 입계를 지나면서 크게 감소하였는데, 이는 입계에 존재하는 잔류액상 및 미반응 211 입자 등에 기인한 결과이다. 입계를 따라 미반응상들이 잔류하는 현상을 억제하기 위해 본. 연구에서는 종자들간의 간격을 조절하였다. 그 결과 종자결정들간의 간격을 최대한 좁게 배열하였을 때 포획자기장의 크기가 입계에서 감소하지 않는 결과를 얻었다. 이와 같이 종자간의간격이 충분히 가까울 경우에는, 결정성장 초기에 두 입자가 하나로 결합될 수 있으므로 입계에 미반응 액상이 잔류하는 현상을 억제할수 있었던 것으로 생각된다.

• 한국정보통신학회논문지
• /
• 제7권7호
• /
• pp.1563-1568
• /
• 2003

국제환경기구(GEF)의 해양환경 위해 지정 대상의 하나인 선박안정수 처리기술로써, 선박 안정수에 포함되어 타 지역으로부터 이동되는 유해성외래침입생물 처리방안을 제안하였다 alpha-AL$_2$O$_3$ 유전장벽층 전극에 의한 강 전리방전 기술을 적용하여 주위 산소와 물분자로부터 고농도 수산자유기(OH : hydroxyl radical) 및 활성입자( OH, $O_2$＋, O (1D), HO$_2$)를 전리, 발생시켜서 이들을 해수에 신속히 용해 확산시켜 비교적 낮은 ∼20mg/L 정도의 수산기농도 하에서 유해성외래침입생물을 소멸 처리하는 환경 친화적 녹색 청정 처리기술이다. 제안된 기술은 대상물의 처리 후 부수적으로 발생할 수 있는 처리잔류물이 전혀 발생하지 않으며, 인공적 화학성분의 약제를 사용하지 않는 저렴한 처리방법으로 대ㆍ소형 원양선박의 안정수에 포함되어 있는 유해성외래침입생물의 타 지역 해양확산을 방지하고 안전하게 처리할 수 있는 자연치유적 신기술이다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.96-96
• /
• 2007

Low voltage organic TFTs (OTFTs) and ZnO based TFTs (<5V), utilizing room temperature deposited $Bi_{1.5}Zn_{1.0}Nb_{1.5}O_7$ (BZN) thin films were recently reported, pointing to high-k gate insulators as a promising route for realizing low voltage operating flexible electronics. $Bi_{1.5}Zn_{1.0}Nb_{1.5}O_7$ (BZN) thin film is one of the most promising materials for gate insulator because of its large dielectric constant (~60) at room temperature. However their tendency to suffer from relatively high leakage current at low electric field (>0.3MV/cm) hinder the application of BZN thin films for gate insulator. In order to improve leakage current characteristics of BZN thin film, we mixed 30mol% MgO with 70mol% BZN and their dielectric and electric properties were characterized. We fabricated field-effect transistors with transparent oxide semiconductor ZnO serving as the electron channel and high-k $(Bi_{1.5}Zn_{1.0}Nb_{1.5}O_7)_{0.7}(MgO)_{0.3}$ as the gate insulator. The devices exhibited low operation voltages (<4V) due to high capacitance of the $(Bi_{1.5}Zn_{1.0}Nb_{1.5}O_7)_{0.7}(MgO)_{0.3}$ dielectric.