• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.9
• /
• pp.814-821
• /
• 2007

A hybrid method is presented for efficient computation of turbulent flow noise at low Mach numbers. In this method, the turbulent flow field is computed by incompressible large eddy simulation (LES), while the acoustic field is computed with the linearized perturbed compressible equations (LPCE) derived in this study. Since LPCE is computed on the rather coarse acoustic grid with the flow variables and source term obtained by the incompressible LES, the computational efficiency of calculation is greatly enhanced. Furthermore, LPCE suppress the instability of perturbed vortical mode and therefore secure consistent and stable acoustic solutions. The proposed LES/LPCE hybrid method is applied to three low Mach number turbulent flow noise problems: i) circular cylinder, ii) isolated flat plate, and iii) interaction between cylinder wake and airfoil. The computed results are closely compared with the experimental measurements.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.504-507
• /
• 2009

The purpose of this work is to predict the low frequency aero-acoustic noise generated from the horizontal axis wind turbine, NREL Phase VI using large eddy simulation and Ffowcs-Williams and Hawkings model provided in the commercial code, FLUENT. Calculated aerodynamic performances such as shaft torque and power are compared with experimentally measured value. Performance results show a good agreement with experimental data within about 0.8%. If the distance by two times is changed from 32D to 64D toward the downstream region, sound pressure level is reduced by about 6.4dB.

• Journal of the Korean Society of Combustion
• /
• v.6 no.2
• /
• pp.29-35
• /
• 2001

Unsteady numerical study has been conducted on combustion dynamics of a lean-premixed swirl-stabilized gas turbine swirl injector. A three-dimensional computation method utilizing the message passing interface (MPI) parallel architecture, large eddy simulation(LES), and proper orthogonal decomposition (POD) technique was applied. The unsteady turbulent flame dynamics are simulated so that the turbulent flame structure can be characterized in detail. It was observed that some fuel lumps escape from the primary combustion zone, and move downstream and consequently produce hot spots. Those flame dynamics coincides with experimental data. In addition, basis modes of the unsteady turbulent flame are characterized using proper orthogonal decomposition (POD) analysis. The flame structure based on odd basis modes is apparently larger than that of even ones. The flame structure can be extracted from the summation of the basis modes and eigenvectors at any moment.

• Wind and Structures
• /
• v.5 no.2_3_4
• /
• pp.257-266
• /
• 2002

In the recent years flow around bridges are investigated using computer modeling. Selvam (1998), Selvam and Bosch (1999), Frandsen and McRobie (1999) used finite element procedures. Larsen and Walther (1997) used discrete vorticity procedure. The aeroelastic instability is a major criterion to be checked for long span bridges. If the wind speed experienced by a bridge is greater than the critical wind speed for flutter, then the bridge fails due to aeroelastic instability. Larsen and Walther (1997) computed the critical velocity for flutter using discrete vortex method similar to wind tunnel procedures. In this work, the critical velocity for flutter will be calculated directly (free oscillation procedure) similar to the approaches reported by Selvam et al. (1998). It is expected that the computational time required to compute the critical velocity using this approach may be much shorter than the traditional approach. The computed critical flutter velocity of 69 m/s is in reasonable comparison with wind tunnel measurement. The no flutter and flutter conditions are illustrated using the bridge response in time.

• 한국연소학회:학술대회논문집
• /
• 2005.10a
• /
• pp.198-203
• /
• 2005

The LES-based level-set flamelet model has been applied to analyze the turbulent propane/air premixed bluff-body flame with a highly wrinkled flame fronts. The present study has been motivated to investigate the interaction between the flame front and turbulent eddies. Special emphasis is given to study the effect of G equation filtering treatment on the precise structure of turbulent premixed flames as well as the effect of sub-grid scale (SGS) eddies on the wrinkling of the flame surface. The level-set/flamelet model has been adopted to account for the effect of turbulence-flame interaction as well as to properly capture the flame front. Numerical results indicate that the present LES-based level-set flamelet approach has a capability to realistically simulate the highly non-stationary turbulent premixed flame.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.200-202
• /
• 2003

In this paper, Gauss filter function is used to filter the N-S equation and the subgrid-scale Reynold stresses model is introduced to deduce the practical form of LES equation for 2-D case for flow calculation of hydraulic machine. Then the LES equation and its discrete form in computational field are obtained in the body-fitted coordinate system and the numerical calculation program is built. The incompressible turbulent flow in double-flow-conduits-sewage pump impeller is computed by using the abovementioned program, and then the distribution rules of velocity and pressure in flow field are obtained. Based on this, the designs of double-flow-conduits-sewage pump impeller are optimized.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.437-441
• /
• 2010

LES results of turbulent premixed combustion flows are introduced by using the dynamic sub-grid scale model based on G-equation describing the flame front propagation. The turbulent premixed combustion flows around bluff body and over backward facing step are analyzed to validate present formation. LES of swirling partially premixed combustion flame is also performed to conform the predictive capabilities of LES model and to prompt our understanding for the combustion flows over double cone swirl burner combustor by using CFD-ACE+ commercial code.

• Journal of the KSME
• /
• v.29 no.4
• /
• pp.360-375
• /
• 1989

이 논평에서는 수치해석에 관련된 국내의 난류모델의 연구현황을 살펴보았다. 국내에서 연구가 많이 되었던 혼합거리모델, R, .epsilon. 2차방정식모델, 대수응력모델의 연구현황을 주로 살펴 보았다. 국내에서는 아직 연구인력이 적기 때문에 꼭 필요한 부분이지만 연구가 되지 않은 부 분이 많았으며 현재 연구가 되고 있는 부분도 그 연구량이 적은 형편이다. 앞으로 전산유체역 학에 의해 열유체기계내의 복잡한 난류유동을 해석하여 기계설계와 운전을 개선하는데 활용하기 위해서는 더욱 많은 연구가 요구된다. 그 중에서 특히 더 관심을 갖고 연구될 분야를 열거 해 보면 (1) 벽면부근의 저 레이놀즈 R, .epsilon. 방정식모델과 대수응력모델에 관한 연구 (2) 복잡한 3차원유동을 정확히 해석할 난류모델 개발에 관한 연구 (3) 복잡한 난류유동에서 열전 달모델에 관한 연구 (4) 레이놀즈응력모델에 관한 연구 (5) Large Eddy Simulation에 관한 연구를 들 수 있다. 이들 연구에서는 난류모델의 물리적 의미에 관한 이론적 연구와 이 모델들 을 여러 경우의 실제유동에 적용하여 검증하는 연구가 병행되어야 할 것이다.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.237-240
• /
• 2002

In the present study, we perform LES of turbulent flow and temperature fields in a circular impinging jet at Re=5000 for two cases of H/D=2 and 6 (H denotes the distance between the jet exit and flat plate, and D does the diameter of the jet exit). In the case of H/D=2, the regular vortical structures observed in free jet do not exist because of the smaller distance than the potential core. The Nusselt number on the wall is largest at $r/D{\cong}10.67$ where vortex rings Impinge. At $r/D{\cong}1.5{\~}2.0$, the vortex rings induce the secondary vortices, resulting in a secondary peak in the Nusselt number there. In the case of H/D=6, the vortex rings change into three-dimensional vortical structures and the small-scale vortices impinge on the flat plate. The increase of turbulent intensity due to small-scale vortices results in the largest Nusselt number at the stagnation point.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.762-767
• /
• 2001

LES formulation was applied to simulate the flow fields around rotating fan blades tested by DLR. The turbulent flows around fan blade rotating with 500 RPM were simulated and the far-field noise was exactly computed by using the Focus Williams and Hawkings equation with an inclusion of quadrapole source formulation. The dipole noise computed at the far-field by predicted drag and lift forces at steady state was in good agreement with experimental data and the dipole source was also found to be the major factor than other sound sources from unsteady calculation.