• 한국구조물진단유지관리공학회 논문집
• /
• 제4권3호
• /
• pp.197-204
• /
• 2000

Tensile strength (stress) of bar splice is important in the research of mechanical behavior of reinforced concrete structures-beam, column etc.- with bar splice. The purpose of this research is to evaluate the flexural behavior - deflection of beam specimens, strain of main bars - of reinforced concrete beam with Lock Joint Coupler. To make a comparative research, reinforced concrete beam specimens with normal deformed bar and lap splice are tested and analyzed. Test results, Comparing a deflection of three types flexural specimens, a flexural specimen with Lock Joint Coupler is 40% greater than the other flexural specimens. At the center of flexural specimen, the strain of main bar(D29) with lock joint coupler is 50% less, and vice versa, at the point of 14cm far from the center of flexural specimen, the strain of main bar(D29) with lock joint coupler is 9% larger than the strain of main bar(D29) which calculated using the classical flexure theory. A discords, between a deflection behavior of the flexural specimens and a strain of the main bar, are caused by the difference of strain between the lock joint coupler and main bar, near the lock joint coupler. So, additional research is need to verify as stated above discords.

• Journal of Welding and Joining
• /
• 제32권5호
• /
• pp.44-49
• /
• 2014

The effect of weldbond hybrid joining process on the mechanical behavior of single lap and L-tensile joints was investigated for the newly developed 1.2GPa grade ultra high strength TRIP(transformation induced plasticity) steel. In the case of single lap shear behavior, the weldbond joint of 1.2GPa TRIP steel showed lower maximum tensile load and elongation than that of the adhesive bonding only. It was considered to be due to the reduction of real adhesion area, which was caused by the degradation of adhesive near the spot weld, and the brittle fracture behavior of the spot weld joint. In the case of L-tensile behavior, however, the maximum tensile load of the weldbond joint of 1.2GPa TRIP steel was dramatically increased and the fracture mode was change to the base metal fracture which is desirable for the spot weld joint. These synergic effect of the weldbond hybrid joining process in 1.2GPa TRIP steel was considered to be due to the stress dissipation around the spot weld joint by the presence of adhesive which resulted in the change of crack propagation path.

• 한국정밀공학회지
• /
• 제20권1호
• /
• pp.172-178
• /
• 2003

Two types of bolted lap joints, one with a viscoelastic layer and the other without the viscoelastic layer were chosen to analyze the dynamic characteristics of the joints with the mechanical properties of the bolts in the joints are considered as computational variables. The finite element method was used along with the modal testing to verify the PEM model. The results in the bolted lap joints reveal that the higher the Young's modulus for the bolts we use the higher the natural frequencies we obtain fur the joints. However, the natural frequency differences in the first and second mode are not substantial but become noticeable in the higher modes. Lower natural frequencies were obtained for the bolted lap joints with the viscoelastic layer when compared with those of the bolted lap joints without the viscoelastic layer. And the differences in the natural frequencies for the two types of joints are relatively small in the first and second mode whereas in the higher mode the differences become significant. The loss factors were observed to be significant especially in the second mode for the bolted lap joints with the viscoelastic layer.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.624-629
• /
• 2001

Two types of bolted lap joints, one with a viscoelastic layer and the other without the viscoelastic layer were chosen to analyze the dynamic characteristics of the joints with the mechanical properties of the bolts of the joints being taken as computational variables. The finite element method was used along with the impact hammer technique to verify the FEM model. The results in the bolted lap joints reveal that the higher the Young's Modulus for the bolts are the higher the natural frequencies results for the joints. However, the natural frequency differences in the first and second mode are not substantial but become noticeable in the higher modes. Lower natural frequencies were obtained for the bolted lap joints with the viscoelastic layer when compared with those of the bolted lap joints without the viscoelastic layer. And the differences in the natural frequencies for the two types of joints are relatively small in the first and second mode whereas in the higher mode the differences become significant. The loss factors were observed to be significant especially in the second mode for the bolted lap joints with the viscoelastic layer.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.121-126
• /
• 2002

The railroad cars or the commercial vehicles are generally manufactured by the spot welding. Among various kinds of spot welded lap joints, multi-lap joints are one of popular joints in manufacturing their body structures. But, fatigue strength of these joints are lower than that of base metal due to high stress concentration at the nugget edge of the spot weld and are known to considerably be influenced by welding conditions as well as the mechanical and geometrical factors. Thus, it is necessary to establish a reasonable and systematic fatigue design criterion for spot welded multi-lap joints. In this paper, the $\Delta$P-N$_{f}$ curves has been rearranged in the $\Delta$$\sigma$-N$_{f}$ relation with the maximum stress at the nugget edge of spot welded multi-lap joints subjected to tensile shear load. Consequently, the fatigue data were evaluated in terms of fracture mechanics by plotting on the $\Delta$OP-N$_{f}$ curves. From the results obtained, both of them have been revealed to be applicable to fatigue design of spot welded multi-lap joints. However, the fracture mechanical approach is found to be more effective than the maximum stress approach in the range on N$_{f}$$\geq$2x10$^{5}$ . .

• 한국항공우주학회지
• /
• 제38권2호
• /
• pp.111-118
• /
• 2010

복합재료 구조물에서 조인트 부위는 매우 취약한 부분이다. 본 논문에서는 후판 알루미늄-알루미늄 조인트 및 복합재-알루미늄 조인트를 접착제로 접합하여 제작한 다음, 인장실험을 수행하여 파손형태를 고찰하였다. 또한, 항복 변형률에 기초한 수정 파손영역 이론을 제안하였으며, 파괴모드별 파손하중과 상호 비교하였다. 후판 알루미늄-알루미늄 조인트와 복합재-알루미늄 조인트의 파손강도를 동일한 파손기준값을 적용하여 예측하였으며, 제작된 14종류의 시편에서는 최대 19.3% 오차범위 내에서 파손강도를 예측할 수 있었다.

• 한국항공우주학회지
• /
• 제41권12호
• /
• pp.967-974
• /
• 2013

저자는 최근 산업체 생산 현장에서 Z-피닝 복합재 구조물을 간편하게 제작할 수 있는 Z-피닝 패치 개념을 제안하였고, 이를 적용하여 복합재 단일-겹침 전단 접합시편을 제작하였으며, 정적시험을 통하여 54~68%의 접합강도의 향상을 발표하였다. 본 연구는 상기 연구의 후속으로서, 반복하중에 대한 접합강도의 향상을 측정하기 위하여 피로시험을 수행하였다. 사용된 Z-핀은 스테인레스강 핀이며, 복합재료와의 결합력을 증가시키기 위하여 표면을 요철 형상으로 가공하였으며, 화학적으로 부식시켰다. 반복하중 조건에서 접합강도는 약 98~125% 향상되었다.

• Smart Structures and Systems
• /
• 제5권4호
• /
• pp.329-344
• /
• 2009

Ultrasonic chaotic excitations combined with sensor prediction algorithms have shown the ability to identify incipient damage (loss of preload) in a bolted joint. In this study we examine a physical experiment on a single-bolt aluminum lap joint as well as a three-dimensional physics-based simulation designed to model the behavior of guided ultrasonic waves through a similarly configured joint. A multiple bolt frame structure is also experimentally examined. In the physical experiment each signal is imparted to the structure through a macro-fiber composite (MFC) patch on one side of the lap joint and sensed using an equivalent MFC patch on the opposite side of the joint. The model applies the waveform via direct nodal displacement and 'senses' the resulting displacement using an average of the nodal strain over an area equivalent to the MFC patch. A novel statistical classification feature is developed from information theory concepts of cross-prediction and interdependence. This damage detection algorithm is used to evaluate multiple damage levels and locations.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.171-174
• /
• 2005

In this study, new moment-resisting precast concrete beam-column joint is proposed for moderate seismic regions. It has the connection reinforcing bars, penetrated the joint and lap-spliced with the bottom bars of precast U-beam. To evaluate the performance for noncontact lapped splice, analytical works were conducted. Major variables for FEM analysis are the length of lap, the diameter of connection reinforcing bars, and the distance between lapped bars. The results of this study show thar the these variables has much influence on strength and deformation of lapped joint.

• Composites Research
• /
• 제24권4호
• /
• pp.48-54
• /
• 2011

본 연구에서는 탄소/에폭시 복합재 단일겹침 접착체결부의 염수 수분율이 체결부의 강도 및 파손모드에 미치는 영향을 연구하였다. 시편은 이차접착 방식으로 제작하였고, $71^{\circ}C$, 3.5% 염수환경에서 수분율 0, 0.2, 0.5, 1.0, 2.0%(포화상태)를 갖도록 노출시켰다. 수분율별 시편은 각 8개씩이고, 두 종류의 시험환경을 고려하여 총 80개의 시편에 대한 시험을 수행하였다. 시험결과 복합재 체결부의 강도는 수분율이 2%(포화상태)에 도달하면 감소하지만 그 이전 과도상태(약 1% 근처까지)에서는 오히려 증가하는 것으로 나타났다. 또한 수분율 1%까지는 고온 환경에서의 강도가 상온 강도보다 2~5% 가량 높게 나타났다. 그러나 수분 포화된 고온 환경 체결부의 강도는 상온 강도 대비 약 5% 가량 저하되는 것으로 나타났다.