• 한국정밀공학회지
• /
• 제20권7호
• /
• pp.63-69
• /
• 2003

Through the previous works, it was found that the laminated grinding wheel is more efficient to generate smoother surface in short time than general grinding wheels. But, if the laminated grinding wheel is easily worn-out, it is impossible to apply this wheel in the real grinding process, because the periodic time for dressing is closely linked to the productivity of the process. So, it is required to investigate the wear of the laminated grinding wheel fer studying the periodic time for dressing. But it is difficult to analyze the dressing period quantitavely. Therefore, in this study, periodic times for dressing of the laminated grinding wheel and general grinding wheel are deduced from the relationship between the wear of grinding wheels and the surface roughness changes according to the number of traverse in cylindrical traverse grinding through experiments. This study shows that there are some differences in the wheel wear mechanisms between the general and laminated grinding wheels. As a result, it is also found that the periodic time for dressing of the laminated grinding wheel is longer than that of the general grinding wheel.

• 한국생산제조학회지
• /
• 제9권5호
• /
• pp.165-171
• /
• 2000

To get smoother ground surface, it is required to replace the grinding wheel with a finer-grit wheel. When the operator replaces the grinding wheel, the balancing and dressing of the wheel surface are necessary. So this replacement has a lot of problems like inconvenience to operators, delays in the operation time, and ineffectiveness in the production process. Therefore, a laminated grinding wheel, which consists of three layers, is provided. The side layers are coarse grits and the middle layer is made up of fine grits. To show the effectiveness of the laminated grinding wheel, experiments on the surface roughness and the material removal rate were performed respectively. As a result, it was found that the grinding process using a laminated grinding wheel can generate smoother ground surface in shorter time.

• 한국정밀공학회지
• /
• 제18권3호
• /
• pp.35-39
• /
• 2001

The precision grinding process is carried out with fine-cutting operation after coarse-cutting operation. So, the laminated grinding wheel has been developed to reduce the ineffectiveness induced by changing the operations. In this study, to investigate the possibility of the practical use of the laminated grinding wheel, the surface residual stress of the workpiece ground by the laminated grinding wheels was compared with that ground by the general grinding wheel, and the influence of the difference in grain sizes, between the coarse grit and fine grit of the laminated grinding wheel, on the surface roughness of the workpiece was investigated.

• 한국정밀공학회지
• /
• 제20권8호
• /
• pp.47-53
• /
• 2003

It was already proven experimentally that the laminated grinding wheel is superior to the general grinding wheel in the productivity of grinding. However, it can't be guaranteed when the workpiece material is cemented carbide. Because of its extreme hardness, the grinding wheels made up of super-abrasives are used for grinding it. So, to investigate the performance in extremely hard materials grinding using super-abrasive grinding wheels, the surface roughness characteristics of cemented carbide ground by the laminated diamond wheels are studied experimentally. Through this study, it is found that the similar surface roughness characteristics, those were found in the studies on the laminated aluminum oxide wheels, are still available.

• 한국정밀공학회지
• /
• 제17권9호
• /
• pp.45-52
• /
• 2000

To reduce two preprocess operations to one in the surface grinding operation the laminated grinding wheel was introduced and its availability has already been investigated in the cylindrical grinding process. Thus in this study the experiment was carried out to attempt to prove that the laminated grinding wheel can be used in the surface grinding process with respect to the roughness and grinding force.