• Korean Journal of Veterinary Research
• /
• v.32 no.3
• /
• pp.381-387
• /
• 1992

Gill epithelia of normal rainbow trout fingerlings and abnormal ones suffering bacterial gill disease by experimental infection were examined by transmitting electron microscopy (TEM) and scanning electron microscopy (SEM). TEM observations revealed that Flavobacterium branchiophila consisted of slender rods measuring 0.5 by 5 to $8{\mu}m$, and they had which were long, thin, flexible filaments measuring approximately 4 nm by $1{\mu}m$, and packed together to organize into bundles. Morphological alterations of the diseased epithelia started at hypertrophy of the lamellar epithelium. F branchiophila attached to the gill surface of infected fish through pili with a regular distance, and did not invade into gill tissue. In SEM observations, normal surface ultrastructure of epithelial cell in the outermost layer were characterized by a typical labyrinth-like structure branching and anastomosing microridges on the cell surface. Hyperplastic lesions in experimentally infected gill were most serious at near the tips. Each filament exhibited a club-like, and fusion between the filaments was sometimes observed at their tips. On the surface of gill filaments, thread-like bacterial cells attached and were entangled. The bacterial cells almost covered the surface. After immersion in 5 % NaCl, the cell of F branchiophila, however, appeared to be indeterminate shape.

• Polymer(Korea)
• /
• v.24 no.4
• /
• pp.488-498
• /
• 2000

Molecular bottle-brush was prepared by hydrogen-bonding between poly(4-vinylpyridine)(P4VP) as main chain and 3-pentadecylphenol (PDP) as amphiphilic side chain. Variation of long period ( $L_{p}$), order-disorder transition temperature ( $T_{ODT}$) and mesomorphic structure of bottle-brush were investigated by changing various mole ratio (x) of pyridine group in P4VP and PDP and molecular weight of P4VP. Upper critical solution temperature (UCST) behaviour was observed. For x 0.8-0.9, maximum critical temperature was found. As molecular weight of P4VP was increased, phase transition occurred at higher temperature. It was found that phase behaviour of the bottle-brush was affected by mobility of P4VP as well as size and regularity of lamellar structure. The $L_{p}$ determined from analysis of crystal structure was in the range of 35 $\AA$ and 40 $\AA$ and was more affected by the molecular weight of P4VP than by mole ratio (x). However, if the molecular weight of P4VP was high, LP value was little affected.ted.d.

• The Korean Journal of Physiology and Pharmacology
• /
• v.2 no.5
• /
• pp.617-628
• /
• 1998

In order to understand the pathogenetic mechanism of adult respiratory distress syndrome (ARDS), the role of phospholipase A2 (PLA2) in association with oxidative stress was investigated in rats. $Interleukin-1{\alpha}\;(IL-1,\;50\;{\mu}g/rat)$ was used to induce acute lung injury by neutrophilic respiratory burst. Five hours after IL-1 insufflation into trachea, microvascular integrity was disrupted, and protein leakage into the alveolar lumen was followed. An infiltration of neutrophils was clearly observed after IL-1 treatment. It was the origin of the generation of oxygen radicals causing oxidative stress in the lung. IL-1 increased tumor necrosis factor (TNF) and cytokine-induced neutrophil chemoattractant (CINC) in the bronchoalveolar lavage fluid, but mepacrine, a PLA2 inhibitor, did not change the levels of these cytokines. Although IL-1 increased PLA2 activity time-dependently, mepacrine inhibited the activity almost completely. Activation of PLA2 elevated leukotriene C4 and B4 (LTC4 and LTB4), and 6-keto-prostaglandin $F2{\alpha}\;(6-keto-PGF2{\alpha})$ was consumed completely by respiratory burst induced by IL-1. Mepacrine did not alter these changes in the contents of lipid mediators. To estimate the functional changes of alveolar barrier during the oxidative stress, quantitative changes of pulmonary surfactant, activity of gamma glutamyltransferase (GGT), and ultrastructural changes were examined. IL-1 increased the level of phospholipid in the bronchoalveolar lavage (BAL) fluid, which seemed to be caused by abnormal, pathological release of lamellar bodies into the alveolar lumen. Mepacrine recovered the amount of surfactant up to control level. IL-1 decreased GGT activity, while mepacrine restored it. In ultrastructural study, when treated with IL-1, marked necroses of endothelial cells and type II pneumocytes were observed, while mepacrine inhibited these pathological changes. In histochemical electron microscopy, increased generation of oxidants was identified around neutrophils and in the cytoplasm of type II pneumocytes. Mepacrine reduced the generation of oxidants in the tissue produced by neutrophilic respiratory burst. In immunoelectron microscopic study, PLA2 was identified in the cytoplasm of the type II pneumocytes after IL-1 treatment, but mepacrine diminished PLA2 particles in the cytoplasm of the type II pneumocyte. Based on these experimental results, it is suggested that PLA2 plays a pivotal role in inducing acute lung injury mediated by IL-1 through the oxidative stress by neutrophils. By causing endothelial damage, functional changes of pulmonary surfactant and alveolar type I pneumocyte, oxidative stress disrupts microvascular integrity and alveolar barrier.

• Korean Journal of Veterinary Research
• /
• v.16 no.1
• /
• pp.11-25
• /
• 1976

Studies on pathogenicities and developmental stages of Nosema apis (Zander, 1909) were carried out through artificial infection to Nosema free honey bees with various levels of spores isolated from local honey bee colony. The results obtained were summarized as follows: 1. The clinical symptoms were observed as dysentery, enteritis of mid-gut (enlargement and decoloration), crawling posture and shortening of the longevity of worker bees in the rearing honey bee colony inoculated with the spores. 2. Number of spores harvested from laboratory rearing honey bees were progresively increased to 4 weeks after inoculation. The regression equations and coefficients of correlations to various spore levels were as follows in each treatment colony. Colony 1. ($$1,000{\times}10^4spores/ml$$) $$y_{c1}=471{\times}10^{4}x+454{\times}10^4(r=0.65^*$$) Colony 2. ($$500{\times}10^4spores/ml$$) $$y_{c2}=340{\times}10^{4}x+207.8{\times}10^4(r=0.99^{**}$$) Colony 3. ($$100{\times}10^4spores/ml$$) $$y_{c3}=150{\times}10^{4}x+84.2{\times}10^4(r=0.99^{**}$$) Colony 4. ($$10{\times}10^4spores/ml$$) $$y_{c4}=13.8{\times}10^{4}x+13{\times}10^4(r=0.98^{**}$$) 3. Average longevity of worker bees artificially infected with Nosema apis was shortened as 21.7~43.8% compare to the control. (p<.05, p<.01) 4. The spores which were isolated from honey bee colony infected with Nosema disease were ovoid or spherical form, and measured, as a rule, from $4.7{\mu}m$ to $6.1{\mu}m$ (mean $5.3{\mu}m$) in length and from $2.4{\mu}m$ to $3.2{\mu}m$ (mean $2.9{\mu}m$) in width. 5. In the mid-gut of honey bees, the spore was progresively germinated and became trophozoite stage. The trophozoites were grown to meronts and their binary fission were begun. The divided two sporoblasts were developed to the spores which had elastic membrane. The new spores were shed in excreta of honey bees 10~15 day after inoculation at $25{\pm}2$ centigrade. 6. The ultrastructure of spore membrane consisted of three layers, such as, outer, middle and inner layer. The sporoplasm consisting lamellar structure occupied only anterior part of the spore and was often extended to posterior direction where definite vacuoles and a polar filament was able to detect.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.23 no.4
• /
• pp.324-331
• /
• 2001

The present study was aimed to investigate the effects of latency period on alveolar ridge distraction using the intraoral distraction device. Nine adult mongrel dogs of either sex, weighing about 15kg, were used. They were divided into 3-day, 5-day, and 7-day groups according to the latency period. The left upper and lower premolars and first molars were extracted. Twelve weeks after the extraction, an osteotomy was performed and the distraction device was applied. After the latency period, the distraction was applied at a rate of 1.2mm for 8 days. The distraction device was left in place for 2 weeks to allow consolidation and was then removed. The animals were sacrified at 8 weeks after completion of distraction and were examined macroscopically, radiographically, and histologically. After completion of the distraction, the alveolar crest protruded prominently, showing the vertical augmentation of the alveolar bone. Soft tissues were broken down after the 6th day of distraction in 3-day latency group, and premature union occurred on the 7th day of distraction in the 7-day latency group. The average distance was $9.40{\pm}0.3mm$ in 3-day latency group, $9.35{\pm}0.1mm$ in 5-day latency group, and $8.85{\pm}0.1mm$ in 7-day latency group. In the radiograph taken at 8 weeks after distraction, there was slight bone resorption around the medial and distal edges of the alveolar bone segment, and a new bone deposition was observed in the neighboring alveolar crest area in all groups. Fibrous tissues were present in a part of the buccal cortical bone area of the distraction gap, and the woven and lamellar bones were observed in the distracted gap. There were bony bridges in the distraction gap in all animals examined. These results suggest that optimal time of latency period on alveolar ridge distraction using the intraoral distraction device is about 5 days in dogs, and about 7days in human beings.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.6
• /
• pp.557-564
• /
• 2000

The bone graft materials can be grossly divided into autogenous bone, allogenic bone, xenogenic bone, and alloplastic material. Much care was given to other bone graft materials away from autogenous bone due to its additional operation for harvesting, delayed resorption and limitation of quantity. Demineralized freeze-dried bone(DFDB) and hydroxyapatite are the representatives of bone graft materials. As resorbable hydroxyapatite is developed in these days, the disadvantage of nonresorbability can be overcome. So we planned to study on the strength and the bone formation at the rats calvarial defects of DFDB graft and those of the composite graft with DFDB and resorbable hydroxyapatite. We used the 16 male rats weighting range from 250 to 300 gram bred under the same environment during same period. After we made the 6mm diameter calvarial defect, we filled the DFDB in 8 rats and DFDB and resorbable hydroxyapatite in another 8 rats. We sacrificed them at the postoperative 1 month and 2 months with the periostium observed. As soon as the specimens were delivered, we measured the compressive forces to break the normal calvarial area and the newly formed bone in calvarial defect area using Instron(Model Autograph $S-2000^{(R)}$, Shimadzu, Japan). The rest of the specimens were stained with H&E(Hematoxylin & Eosin) and evaluated with the light microscope. So we got the following results. 1. In every rats, there was no significant difference between the measured forces of normal bone area and those of the bone graft area. 2. In 1 month, the measured forces at DFDB graft group were higher than those of the DFDB and resorbable hydroxyapatite composite graft group(P<0.05). 3. In 2 months, there was no significant differences between the measured forces of DFDB graft group and those of the DFDB and resorbable hydroxyapatite composite graft group. 4. In lightmicroscopic examination, most of the grafted DFDB were transformed into bone in 1 month and a large numbers of hydroxyapatite crystal were observed in DFDB and resorbable hydroxyapatite composite graft group in 1 month. 5. Both group showed no inflammatory reaction in 1 month. And hydroxyapatite crystals had a tight junction without soft tissue invagination when consolidated with newly formed bone. 6. In both groups, newly formed bone showed the partial bone remodeling and the lamellar bone structures and some of reversal lines were observed in 2 months. From the above results, it is suggested that DFDB and resorbable hydroxyapatite composite graft group had a better resistance to compressive force in early stage than DFDB graft group, but there would be no significant difference between two groups after some period. And it is suggested that the early stage of bone formation procedure of DFDB and resorbable hydroxyapatite composite graft group was slight slower than that of DFDB graft group, but there would be no significant difference between two groups after some period.

• Clean Technology
• /
• v.19 no.3
• /
• pp.257-263
• /
• 2013

The zinc phosphate-coated mica (ZP/mica) pigments were prepared using phosphoric acid, zinc nitrate and mica as starting materials, and used as anticorrosive pigments. The scanning electron microscopy (SEM) and x-ray diffraction (XRD) techniques were used to observe the morphology and crystal structure of prepared pigments. The prepared pigments were incorporated into an epoxy binder to prepare coating and the corrosion inhibition performance of the pigments was evaluated using electrochemical impedance spectroscopy (EIS). It was found that the anticorrosive performance of the ZP/mica pigment prepared at $70^{\circ}C$ was the better than that prepared at $20^{\circ}C$. The formation of ZnO, in addition to $Zn_3(PO_4)_2{\cdot}2H_2O$, was observed on ZP/mica pigment prepared at $70^{\circ}C$. The excellent anticorrosive performance of ZP/mica pigment could be ascribed to the synergistic effect with electrochemical anticorrosive mechanism from zinc compounds on mica and barrier anticorrosive mechanism from lamellar mica.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.37 no.1
• /
• pp.1-21
• /
• 2011

This review describes several kinds of emulsification methods for nanoemulsions and the application of nanoemulsions. Nanoemulsion droplet sizes fall typically in the range of 20 ~200 nm and show narrow size distributions. Although most of the publications on either oil-in-water (O/W) or water-in-oil (W/O) nanoemulsions have reported their formation by dispersion or high-energy emulsification methods, an increased interest is observed in the study of nano-emulsion formation by condensation or low-energy emulsification methods based on the phase transitions that take place during the emulsification process. Phase behaviour studies have shown that the size of the droplets is governed by the surfactant phase structure (bicontinuous microemulsion or lamellar) at the inversion point induced by either temperature or composition. Studies on nanoemulsion formation by the phase inversion temperature (PIT) method have shown a relation between minimum droplet size and complete solubilization of the oil in a microemulsion bicontinuous phase independently of whether the initial phase equilibrium is single or multiphase. Due to their small droplet size nanoemulsions possess stability against sedimentation or creaming with Ostwald ripening forming the main mechanism of nanoemulsion breakdown. An application of nanoemulsions is the preparation of nanoparticles using a polymerizable monomer as the disperse phase where nanoemulsion droplets act as nanoreactors, cosmetics and controlled drug delivery. In this review, we mainly focus on the cosmetics.

• Journal of Technologic Dentistry
• /
• v.32 no.3
• /
• pp.195-207
• /
• 2010

Purpose: The purpose of this study was to observe the microstructural changes of surface in the specimens, performing the shear bond strength testing. The currently most used non-precious alloys are nickel-chromium based alloys with or without beryllium. However, their biocompatibility has been questioned concerning possible damages to the health of the patient and professionals involved in the fabrication of prosthesis caused by long exposure to Ni and Be. An option to nickel-chromium alloys is the cobalt-chromium alloy, an alternative that does not sacrifice the physical properties of the metal porcelain systems. Studies in the animals substantially show that the cobalt-chromium alloys are relatively well tolerated, being therefore more biocompatible than the nickel-chromium alloys. Methods: Non-addition Be to nickel-chromium based alloy(Bellabond plus) and cobalt-chromium alloy which has been widely used(Wirobond C) fused with ZEO light porcelain classified control group and cobalt-chromium alloy which is developing alloy of Alphadent company in Korea(Alphadent alloy) fused with ZEO light porcelain classified experimental group. The specimens of $4mm{\times}4mm{\times}0.5mm$ were prepared as-cast and as-opaque to cast body to analyze the mechanical characteristic change, the microstructure of alloy surface. The phase change was used to observe through XRD analysis and OM/SEM was used to observe the surface of specimens as-cast and as-opaque to cast body. Chemical formation of their elements was measured with EDS. Then hardness was measured with Micro Vicker's hardness tester. Shear bond strength test thirty specimens of $10mm{\times}10mm{\times}2mm$ was prepared, veneered, 3mm high and 3mm in diameter, over the alloy specimens. The shear bond strength test was performed in a universal testing machine(UTM) with a cross head speed of 0.5mm/min. Ultimate shear bond strength data were analyzed with one-way ANOVA and the Scheffe's test (P<0.05). Within the limits of this study, the following conclusions were drawn: The X-ray diffraction analysis results for the as-cast and as-opaque specimens showed that the major relative intensity of Bellabond plus alloy were changed smaller than Wirobond C and Alphadent Co-Cr based alloys. Results: Microstructural analysis results for the opaque specimens showed all the alloys increased carbides and precipitation(PPT). Alphadent Co-Cr based alloy showed the carbides of lamellar type. The Vickers hardness results for the opaque specimens showed Wirobond C and Alphadent Co-Cr based alloys were increaser than before ascast, but Bellabond plus alloy relatively decreased. The mean shear bond strengths (MPa) were: 33.11 for Wirobond C/ZEO light; 25.00 for Alphadent Co-Cr alloy/ZEO light; 18.02 for Bellabond plus/ZEO light. Conclusion: The mean shear bond strengths for Co-Cr and Ni-Cr based alloy were significantly different. But the all groups showed metal-metal oxide modes in shear bond strengths test at the interface.

• Applied Microscopy
• /
• v.33 no.1
• /
• pp.1-16
• /
• 2003

As is well known that N-nitroso-N-methylurethane (NNNMU) causes acute lung injury (ALI) in experimental animals. And ALI caused by NNNMU is very similar to ARDS in human being in its pathology and progress. In its context, we investigated the pathogenetic mechanism of ARDS associated with oxidative stress by neutrophils in Sprague-Dawley rat model of NNNMU-induced ALI. NNNMU had increased lung weight/body weight ratio (L/B ratio), lung myeloperoxidase (MPO) activity, protein content and number of neutrophils in bronchoalveolar fluid (BALF) compared with those of control rat (p<0.001, respectively). In contrast, the amount of pulmonary surfactant in BALF was decreased by NNNMU (p<0.001). Morphologically, light microscopic examination denoted pathological findings such as formation of hyaline membrane, infiltration of neutrophils and perivascular cuffing in the lungs of NNNMU-treated rats. In addition, ultrastructural changes such as the necrosis of endothelial cells, swelling and vacuolization of lamellar bodies of alveolar type II cells, and the degeneration of pulmonary surfactant were identified after treatment of NNNMU. Very interestingly, cerium chloride electron microscopic cytochemistry showed that NNNMU had increased the production of cerrous-peroxide granules in the lung, which signified the increased production of hydrogen peroxide in the lung. Collectively, we conclude that NNNMU causes acute lung leak by the mechanism of neutrophilic oxidative stress of the lung.