• Mycobiology
• /
• 제34권3호
• /
• pp.148-150
• /
• 2006

Karoowia saxeti was recorded during the lichen field expedition in southern part of Korea in 2006. The lichen was found on the rock surface along coastal line. This species was easily recognized by chemistry (K+ yellow) and the presence of isidia. Thallus was saxicolous, subcrustose, more or less lobate at the center with clearly lobed margins, $2{\sim}6\;cm$ broad and pale yellowish green. Thalli lobes were irregular, variable, up to 1.0mm wide, not branched, flat to more or less convex and contiguous to subimbricate. Upper surface of the thalli was continuous, emaculate, moderately isidiate. The isidia was subglobose to cynlindrical, darkening at the tips and unbranched. Low surface of the thalii was black with a spongy rhizoidal and lamellar layer. HPLC analysis proved the presence of stictic acid (K+ yellow), norstictic acid and usnic acid. This is the first record of the species in South Korea.

• 폴리머
• /
• 제28권6호
• /
• pp.509-518
• /
• 2004

비대칭 블록 공중합체와 단일고분자로 구성된 블렌드의 미세 도메인 구조와 결정화 거동을 소각 X-선 산란, 광학 현미경 및 DSC를 사용하여 조사하였다. 본 연구에서는 폴리(메틸 메타크릴레이트) 블록의 무게 분률이 0.53인 폴리(메틸 메타크릴레이트)-폴리스티렌 이종 블록 공중합체 (PMMA-b-PS)를 저분자량 폴리(비닐리덴 플루오라이드) (PVDF)와 혼합하였다. PVDF 함량 증가에 따라 블렌드 미세구조가 라멜라에서 실린더 구조로 전이하였으며, PVDF의 결정화는 결정화 이전에 형성된 미세구조의 배열을 교란시켜 질서도가 낮은 형태를 야기시켰다. 또한, PVDF 결정화 거동은 PMMA 블록과의 혼화성 및 미세 도메인에 의해 부가되는 공간적 제한에 큰 영향을 받았다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.56.1-56.1
• /
• 2012

The microstructures and mechanical properties of Co-29Cr-6Mo alloy with C and N additions, produced by additive manufacturing using electron beam melting (EBM) method, were studied using X-ray diffraction, electron back scatter diffraction, transmission electron microscope, Vickers hardness tests, and tensile tests, focusing on the influences on the build direction and the various heat treatments after build. It is found that the microstructures for the as built specimens were changed from columnar to equiaxed grain structure with average grain size of approximately $10-20{\mu}m$ due to the heat treatment employing the reverse transformation from a lamellar (hcp + $Cr_2N$) phase to an fcc. Our results will contribute to the development of biomedical Ni-free Co-Cr-Mo-N-C alloys, produced by EBM method, with refined grain size and good mechanical properties, without requiring any hot workings.

• 한국재료학회지
• /
• 제27권1호
• /
• pp.8-11
• /
• 2017

Binary Ti-Al alloys containing 50 to 60 atomic percent aluminum are rapidly solidified by hammer anvil method under an argon atmosphere. Constituent phases in each alloy are identified by X-ray diffractometry and microstructures of the alloys are investigated using a transmission electron microscope. In alloys with aluminum content between 50 and 54 percent, a second phase exists besides TiAl(${\gamma}$); this second phase is identified as $Ti_3Al$(${\alpha}2$). The ${\alpha}2$ phase is observed in two types of morphology. One is as fine lamellar alternating with ${\gamma}$ and the other is as a particle. It is concluded that the existence of a metastable phase with the morphologies stated above should arise from a higher quenching rate attained by the hammer anvil method as compared to the conventional roll or splat-quench method. Implications of the above observation are discussed with respect to the phase relations in the Ti-Al binary system; these implications are still controversial in many respects.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.859-860
• /
• 2006

TiC-$TiB_2$-SiC system was a ternary eutectic, whose eutectic composition was 34TiC-$22TiB_2$-44SiC (mol%). TiC-$TiB_2$-SiC ternary eutectic composite were synthesized by a floating zone method using TiC, $TiB_2$ and SiC powders as starting materials. The TiC-$TiB_2$-SiC eutectic composite showed a lamellar texture. TiC(022), $TiB_2(010)$ and SiC(111) of the eutectic composite were perpendicular to the growth direction. TiC-$TiB_2$-SiC ternary eutectic composite had specific relationship among the crystal planes: TiC[011]//$TiB_2[010]$//SiC[112], TiC(200)//$TiB_2$(001)//SiC(402) and $TiC(1\bar{1}1)$//$TiB_2(101)$//SiC(220).

• Journal of Microbiology and Biotechnology
• /
• 제12권4호
• /
• pp.643-648
• /
• 2002

For wastewater treatment and utilization of the biomass, a photosynthetic bacterium was isolated based on its cell growth rate, cell mass, and assimilating ability of organic acids. The isolate was a Gram-negative rod-shaped bacterium that contained a single polar flagellum and formed a lamellar intracytoplasmic membrane (ICM) system, including bacteriochlorophyll $\alpha$. The major isoprenoid quinone component was identified as ubiquinone Q-10, and the fatty acid composition was characterized as to contain relatively large amount of C-16:0 (18.74%) and C-18:1 (59.23%). Based on its morphology, phototrophic properties, quinone component, and fatty acid composition, the isolate appeared to be closely related to the Rhodopseudomonas subgroup of purple nonsulfur bacteria. A phylogenetic analysis of the isolate using its 16S rRNA gene sequence data also supported the phenotypic findings, and classified the isolate closely related to Rhodopseudomonas palustris. Accordingly, the nomenclature of the isolate was proposed as Rhodopseudomonas palustris KUGB306. A bench-scale photosynthetic bacteria (PSB) reactor using the isolate was designed and operated for the treatment of soybean curd wastewater.

• Journal of Microbiology and Biotechnology
• /
• 제26권2호
• /
• pp.364-372
• /
• 2016

Sand tubules, made up of sand grains cemented by microbe-induced calcium carbonate precipitation, have been found in China's Ningxia Province. Sand tubules grow like a tree's roots about 40-60 cm below the surface. The properties of sand tubules and their bacterial community were examined. X-Ray diffraction analysis revealed that the sand tubules were associated with crystalline calcite. Scanning electron microscopy showed that the crystalline solid had a lamellar structure and lacked the presence of cells, suggesting that no bacteria acted as nucleation sites, nor that the crystalline solid was formed by the aggregation of bacteria. Denaturing gradient gel electrophoresis analysis showed 11 of the 12 detectable bands were uncultured bacteria by BLAST analysis in the GenBank database, and the rest were closely related to Paenibacillus sp. (100% identity). By cultivation techniques, the only strain isolated from the sand tubule was suggested to be related to Paenibacillus sp.; no archaea were found. Furthermore, Paenibacillus sp. was demonstrated to induce calcium carbonate precipitation in vitro.

• 한국주조공학회지
• /
• 제11권6호
• /
• pp.455-462
• /
• 1991

The formation of brittle intermetallic compound such as $VAl_3$ tends tp lower the toughness of V-Al alloys. Also, due to the high melting point of vanadium, it is difficult to make that alloy by previous ingot metallurgy method. To depress the technique has been adopted. The effect of particle size and milling time on the phase has been thoroughly studied. For mechanical alloying, SPEX mixed/mill has been used. The milling time and the composition of V and Al are varied to find the optimum condition of forming amorphous phase. The X-Ray Diffrection pattern, microstructure detection, microhandess test, experiments are carried out to analyze MA product. When the final step is reached, no lamellar-structure is detected. The steady state condition is observed after 8 hours and 10 hours milling for 15wt.%Al and 30wt.%Al alloy, respectively. The microhardness continuously increases up to 10 hours after then it remains constant.

• 한국주조공학회지
• /
• 제30권5호
• /
• pp.161-166
• /
• 2010

In this examination, the effect of Sr addition and holding time on microstructure of Al-10.5wt%Si-2wt%Cu secondary die-casting alloy was investigated. Degree of undercooling was improved with increasing the Sr content in this alloy. Up to 0.02wt%Sr addition, acicular and lamellar eutectic structure was observed in the microstructure. Meanwhile, the eutectic Si was modified toward the fine fibrous form by increasing Sr content with more than 0.03wt% and holding time of the melt. The well- modified alloys showed decreased eutectic silicon size from 3.25 ${\mu}m$ to less than 0.8 ${\mu}m$. From these results, the optimal strontium content and holding time were identified on the Al-10.5wt%Si-2wt%Cu secondary die-casting alloy.

• 한국지구과학회:학술대회논문집
• /
• 한국지구과학회 2010년도 춘계학술발표회 논문집
• /
• pp.104-105
• /
• 2010

울산 퇴적 분지에 분포하는 신현층의 이암층 노두에서 이매패에 속하는 Anadara 를 비롯한 여러 종류의 연체동물 화석을 채집하였다. Anadara 화석은 해성 기원의 연체동물로 Vicarya japonica Yabe and Hatai와 함께 소위 Vicarya-Anadara 군집에 속한다. 이 군집은 우리나라의 제3기 생층서를 이해하는데 가장 중요한 정보를 제공한다. 여기에서는 Andara 화석의 형태적 특징과 내부 구조를 고찰하고, 현생종과 비교하였다. 신현층에서 산출된 Anadara 화석은 1속 2종으로 구성된다. 각의 형태적 특징은 각의 외형이 삼각형에 가깝고, 표면에 25~30개의 방사륵이 발달해 있으며 인대면은 삼각형 모형으로, 교치선은 직선이다. 각의 내부 구조를 박편상에서 관찰한 결과, 4개의 층으로 구성되어 있다. Anadara 화석과 현생종 Scapharca subcrenata 을 비교한 결과, 각의 외형은 조금 다르나 내부구조는 서로 거의 유사하다. A. (H.) kakehataensis의 내부 구조는 최외층, 외층, 광휘층, 내층으로 구성되어 있다. 외층은 교차판 구조(crossed- lamellar structure)로 되어 있다. 또한 성장선이 발달되어 있으며, 복연부에 불규칙한 균열이 부분적으로 나타난다. 이는 외부로 노출되어 건조되고 다시 물기를 머금은 상태가 반복되어 수축 팽창에 의한 것이라고 생각되며, 별개의 층은 아니다. 내층은 엽상구조(foliated structure)가 관찰된다. 외층과 내층 사이에 아라고나이트로 구성된 광휘층이 나타나며, 능주 구조(prismatic structure)를 보이는 얇은 층이다. 최외층이 나타난다. A. (H.) daitokudoensis의 내부 구조는 A. (H.) kakehataensis와 서로 거의 유사하고, 내층, 외층, 광휘층 및 최외층의 4개의 층으로 구성된다. 엽상 구조인 내층, 교차판 구조인 외층, 능주 구조인 광휘층 및 최외층은 유기질층으로 되어있다.