• Journal of Chest Surgery
• /
• 제33권6호
• /
• pp.502-506
• /
• 2000

Background: Anticoagulant therapy can be required during pregnancy with prosthetic heart valves. Warfarin and heparin provide real protection against thromboembolic phenomena, but they also carry serious risks for the fetus and the mother. In an attempt to identify the best treatment for pregnant women with cardiac valve prostheses who are receiving anticoagulant, we studied 19 pregnancies, the warfarin was discontinued and heparin was administered every 12 hours by subcutaneous injection in doses adjusted to keep the midinterval aPTT in the therapeutic range(at least 2-2.5 control) from the conception to the 12th week of gestation and oral antiocagulant was then administered until the middle of the third trimester in the therapeutic range(at least 2 INR), and heparin therapy was restared until delivery. Also in order to avoid an anticoagulant effect during delivery, it has been our practice to instruct women to either discontinue their heparin injections with the onset of labur or to stop heparin injections 12 hours prior to the elective induction of labour. Result: The outcome of 19 pregnancies managed with above protocol was spontaneous abortion in 3 cases, voluntary termination in 2 cases, premature delivery at 35 weeks in 1 case and delivery at full-term in 14 cases. There was no maternal morbidity and moratality and fetopathy. Conclusion: We conclude that in the second and third trimester of pregnancy, warfarin provide effective protection against thromboembolism, Oral antiocagulant therapy should be avoided in 2 weeks before delivery because of the risk of serious perinatal bleeding caused by the trauma of delivery to the anticoagulated fetus. However, the substitution of heparin at first trimester and 2 weeks before delivery reduce the incidence of complications.

• 현장농수산연구지
• /
• 제10권1호
• /
• pp.169-181
• /
• 2008

The purpose of this study was to produce Pleurotus ostreatus using fermenter with bag cultivation. These results are as follows. 1. While mushroom composts were being fermented in a fermenter, the physical property of the fermented composts was getting better when there isn't any screw or revolving flies in the fermenter and the strength of pressing the composts was getting less. 2. The composts were fermented well as slaked lime of 1% density added to the composts. 3. According to the result of examining our fermenting ways, composts were in the best condition after being fermented for 48 hours since the temperature in a fermenter has come to 60℃, which could be reached by heating the fermenter by 40℃ after putting compost materials and water into it. 4. The good condition of fermenting could be maintained by controlling the speed of revolving flies, therefore the speed be down when the temperature is above 60℃ and up bellow 60℃. 5. Since the composts had been added with 1.5~2% of cottonseed meal or rice bran, the fermented composts were in good condition and also the quantity and quality of the mushroom produced on the fermented composts were satisfied. 6. There were needed 7 hours of labour for 3days from the first day of putting composts into a fermenter for fermenting 3.5M/T(10,000~12,000bags of 750~800g per bag) of composts to the third day of finishing the fermenting work, and also the cost was 112,066￦(130$) including 52,066￦(60$) of electric charge and fuel expense.

• 한국조리학회지
• /
• 제7권3호
• /
• pp.45-56
• /
• 2001

The HPC(High Pressure Cooking) method and the traditional method of brown stock preparation are compared in terms of gelatin, free amino acid and sensory evaluation. The HPC outperform the traditional method. In addition, free amino acid content of brown stock increased when HPC method is applied. In traditional method, however, the contents of free amino acids gradually increased in proportion to the length of heating times. When the HPC method is used for brown stock, the level of alanine and methionine were relatively higher than that of traditional method. In order to measure the quality of brown stock made from different methods, the highly qualified chefs were selected. They favoured the taste and smell made from HPC while they preferred traditional approach to HPC in terms of stickiness and appearance(colour). It is turned out that five hours is the most appropriate heating time for HPC method to obtain the maximum extraction of amino acid. The results suggest that the quality of brown stock from HPC method is not at all inferior to that of traditional brown stock while the HPC approach can improve the level of productivity by saving the labour cost, food cost and time.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.195-197
• /
• 2009

It is a proven fact with the opening of the Seoul metro line number 1 in 1974 traffic congestion on the roads has decreased and the efficiency of people transportation in general has greatly been enhanced in the downtown and surrounding areas of Seoul. Even today construction of new subway lines are under way and many more are being planned due to the easy access to stations, short waiting and average travel times, compared with personal vehicles, contributing to the efficiency of the public transportation systems that are linking the downtown areas and also the intercity systems in moving passengers during rush hour and times of special event. Since the labour costs of the train operator in any large city based subway system accounts for a major part of the operating costs per kilometer and to ensure cost efficient operations, especially during non-peak hours, it is necessary to implement an unmanned(auto-driven) subway system. In order to implement such a system it is imperative that the on-board and wayside signalling control systems be fully automated as well. Only through proper examination of safety procedures not only by the AUGT(Automated Urban Guided Transport)system but also by ail the international standards organizations involved can safely and stability be ensured.

• Journal of Preventive Medicine and Public Health
• /
• 제7권2호
• /
• pp.305-312
• /
• 1974

Studies on 66 industrial accidents happened in a battery manufacturing industry during a year of 1973 were carried out. The results obtained are follows, 1. Majority of employees of this industry was occupied by yong woman aged between 20-24. 2. Incidence rate, frequency rate and severity rate of the accidents was 36.8 per 1,000, 12.8 per 100,000 labour day and 0.3% respectively. Anual average days of lost due to accidents was 18.0 days. 3. Accidents happened more frequently in male than female, and happened most frequently in age between 30-34. 4. As to type of work, 47.9% of the accidents happened on hand operating workers. This was the same in both sex. 5. Accidents happened mainly during 2-3 hours latter from work starts in both morning and afternoon work, 6. 63.6% of the accidents happened on hands in both sexes and followed by lower extremities. 7 Surface wounds like as laceration, cut and abrasion were the main types of injury occupying 31.8% and followed by burn at 24.2%. 8. 54.5% of accidents needed 1-2 weeks to heal the injury and heavy injury needed more than 5 weeks was only 9.1%. 9. Accidents happened most frequently in employees who served between 2-3 years in this industry, but observing of sex difference. it was most frequent in male who served more than 4 years whereas less than 6 months in female.

• 한국작물학회지
• /
• 제26권3호
• /
• pp.273-277
• /
• 1981

향끽미품종인 ST375-4를 공시하여 수확기를 앞당기고 노력을 절멸하며 수량과 품질을 향상시키는 재배법을 구명코자 한 구덩이에 5주를 이주하여 개량 Mulching하는 1혈다주 개량Mulching, 한 구덩이에 1주를 이주하는 일반 Mulching 및 무피복재배로 실시한 결과를 요약하면 다음과 같다. 1. 1혈다주 개량 Mulching 재배는 무피복재배구 보다 수확기가 14일 앞당겨졌다. 2. 1혈다주 개량Mulching재배는 이식노동력이 무피복재배보다 44.9% 절감되었다. 3. 1혈다주 개량 Mulching 재배시 엽면상체조도는 무피복재배와 차가 없었다. 4. 1혈다주 개량 Mulching 재배는 무피복재배에 비해 수량 28.7%, kg 당가격가 15.0%가 향상되었다.

• 노동경제논집
• /
• 제29권2호
• /
• pp.171-199
• /
• 2006

직업능력개발훈련교사의 전문성 확보와 직업안정성 향상을 위해 상위 등급 자격증의 취득을 권장하고 있지만 현장에서의 호응은 저조한 것으로 평가되고 있다. 본 연구는 직업훈련교사로 근무하고 있는 300명을 대상으로 근로시간 및 임금과 이에 대한 만족도를 파악하였고, 상위 등급 자격소지가 임금결정에 미치는 영향력을 분석하였다. 임금결정에 영향을 미치는 요인은 남성, 연령, 대학원 졸업, 총근속기간, 총근로시간, 현재 근무처, 정규직 여부와 함께 자격 등급인 것으로 분석되었다. 본 연구 결과는 직업훈련교사 일자리 개선방안을 위한 기초자료로 이용될 것으로 기대한다.

• 식품보건융합연구
• /
• 제5권2호
• /
• pp.1-11
• /
• 2019

The objective of this study is to assess the effect of interpregnancy interval on fetal outcome among women with term premature rupture of membrane in public hospitals, Ethiopia, 2017. Facility based follow up study was conducted in Southern Ethiopia public hospitals from February 30, 2017 to August 20, 2017. Among 150 observed mothers with interpregnancy interval of less two years, 46.67 % (95% CI: (7.170, 29.93) of them experienced adverse birth outcome, but among 173 women with interpregnancy interval of two and above years, 5.78% (95% CI: (7.170, 29.93) of them experienced adverse birth outcome. The odds of adverse birth outcome were more among women with interpregnancy interval of less than two years (AOR=17.899, 95%CI: [6.425, 49.859]. The effect of interbirth interval of less than two years on adverse birth outcome of newborn was increased by length labor of >=24 hours, induction of labour and cesarean section delivery. Interpregnancy interval of less than two years, in collaboration with other risk factors, is the main predictor of adverse birth outcome. Therefore especial attention should be given to mothers with birth spacing by using family planning methods to reduce adverse birth outcome.

• 생물환경조절학회지
• /
• 제25권3호
• /
• pp.206-211
• /
• 2016

개량일자형 수형과 웨이크만식 수형은 우리나라에서 가장 널리 사용되는 수형으로 '캠벨얼리'와 같은 단초 전정형 품종에 장점을 가지고 있다. 본 시험에서는 웨이크만식 수형과 개량일자형 수형에서의 노동시간과 노동강도를 비교하였다. 그 결과, 송이다듬기는 웨이크만식 수형에서 17.3 시간/10a, 개량일자형 수형에서 12.3/10a 시간이 소요되었다. 봉지씌우기는 웨이크만식 수형에서 10.1 시간/10a, 개량일자형 수형에서 8.2 시간/10a가 소요되었다. REBA index를 이용하여 송이다듬기와 봉지씌우기의 노동강도를 확인한 결과 웨이크만식 수형에서 13점, 개량일자형 수형에서 8.6점을 나타내었다. 한편, 개량일자형 수형에서는 포도나무 신초들의 절간장과 절간굵기의 강한 생장도 감소하였다. 결과적으로 개량일자형 수형은 우리나라의 포도과원 생력화에 더욱 편리한 수형이다.

• 한국산업보건학회지
• /
• 제17권1호
• /
• pp.31-42
• /
• 2007

Recently, concerns regarding indoor air quality in offices have continued to increase. Thirty offices in five metropolitan commercial buildings were surveyed from February to April 2004. Sampling was performed during normal business hours. Thermal comfort factors such as temperature and relative humidity, carbon dioxide ($CO_2$), carbon monoxide (CO), formaldehyde (HCHO), respirable dust, $PM_{10}$ were sampled and analyzed to determine the mean, standard deviation, range, and correlation for each of those parameters. The data was then compared to office as standard of Ministry of Labor, and guideline applicable to the indoor environment. The results represented that the temperature was slightly higher than the standard of American Society of Refrigerating and Air-Conditioning Engineers (ASHRAE), the relative humidity was lower that the standard of ASHRAE. The range of the 8-TWA concentration of $CO_2$ was 639 ~ 786 ppm, but 33.3% of the total thirty offices exceeded the 1000 ppm as ceiling concentration. The concentration of CO was less than 3 ppm, which was similar to that of offices in Japanese. The mean concentration of formaldehyde was 0.032 ppm, and only 2 % of total samples (193) exceeded the 0.1 ppm, standard of formaldehyde in office air. The concentration of respirable dust and $PM_{10}$ was not exceeded the standard of those parameters, $150{\mu}g/m^3$. The concentration of those parameters in the office air was statistically correlated.