• Korean journal of applied entomology
• /
• v.45 no.2 s.143
• /
• pp.227-234
• /
• 2006

For the biological control of the greenhouse whitefly, aphids, American leaf-miners, Encarsia formosa, Aphidius coiemani, Diglyphus isaea, and Dacnusa sibirica were used as biological control factors. Otherwise, many kinds of environment friendly agricultural materials were also used in the kindly environment friendly farming. For testing the toxicity of environment friendly agricultural materials against to insect parasitoids as biological control factors, 61 environment friendly agricultural materials were selected by using methods and periods with insect parasitoids in the greenhouses. Environment friendly agricultural materials were sprayed to mummies and adults of E. formosa and A. colemani, and adults of Diglyphus isaea and Dacnusa sibirica in laboratory condition. Emergence rates were checked during 12 days after spray to mummies of E. formosa and A. colemani, and survival rates were at 24 and 48 hours after viral test for adult parasitoids, with 10% sugar solution. Emergence rates of E. formosa mummies were inhibited by sprayed the fungicidal environment friendly agricultural material (FEFAM) E and the environment friendly agricultural materials contained molybdenum (EFAMMo) G as 0.4 and 2.7%, respectively. E. formosa adults were not survived in vial for 48hours after sprayed and dried with the environment friendly agricultural materials contained plant extract (EFAMPE) J and the EFAMMo C. The environment friendly agricultural materials contained microelements (EFAMMEs) B and EFAMPE H, environment friendly agricultural materials contained useful soil microorganisms (EFAMSMs) H, FEFAM A and FEFAM D were recorded low survival rates of E. formosa adults with 6.7, 13.3, 13.3, 20.0 and 20.0, respectively. In case of the spraying environment friendly agricultural materials to mummies of A. colemani there were low emergence rate from mummies to adults as around 20s % with water spraying as control. A. colemani adults were not survived in vial with EFAMMo C. EFAMPE J, EFAMPE F, EFAMPE H, EFAMSM H were recorded low survival rates under 20% as 6.7, 13.3, 13.3 and 13.3, respectively, D. isaea and D. sibirica adults were not survived in vial with EFAMPE J. EFAMMo C was 53.3% of survival rates in 48 hours vial tests. D. isaea and D. sibirica were not affected by environment friendly agricultural materials compared with E. formosa and A. colemani.

• Korean Journal of Dental Materials
• /
• v.44 no.2
• /
• pp.171-178
• /
• 2017

The purpose of this study is to investigate the effect of number of times dipped in coloring liquid and sintering temperature on the flexural strength of zirconia ceramic. In this study, using a zirconia block having improved transparency, specimens with size of $25mm{\times}2mm{\times}1.5mm$ were fabricated. The zirconia ceramic specimens were divided into three groups according to the number of times dipped in coloring liquid by 0, 2 and 4 times, and dyed in the coloring liquid to give color to each specimen. Then, after sintering them at the final temperature of $1,450^{\circ}C$ and $1,600^{\circ}C$, flexural strength was measured using a universal testing machine (total 6 group, n=10 for each group). Also, a scanning electron microscopy (SEM) was performed to observe its microstructure, and the data obtained through the experiment were analyzed with two-way ANOVA. The results of the flexural strength analysis show that the highest value was measured $762.3{\pm}42.3MPa$ in EKL2 group, while the lowest value was $516.4{\pm}77.1MPa$ in EKH4 group. According to the results of the two-way ANOVAs, flexural strength was not related with interaction between sintering temperature and number of times dipped in coloring liquid ($R^2=0.737$). However, there were statistically significant differences in flexural strength depending on sintering temperature (P<0.001). The flexural strength of zirconia ceramics having improved transparency was dependent on sintering temperature. The number of times dipped in the coloring liquid did not affect flexural strength of the zirconia ceramic having improved transparency.

• Journal of The Korean Ophthalmological Society
• /
• v.58 no.4
• /
• pp.380-386
• /
• 2017

Purpose: To compare the clinical characteristics and prognosis of Fuchs dystrophy patients according to COL8A2 gene mutation status. Methods: Eighty-one patients (162 eyes) initially diagnosed with Fuchs dystrophy from 1996 to 2015 were divided into two groups according to COL8A2 gene mutation status. Retrospective analysis was performed comparing gender, age at diagnosis, presence of family history, diabetes mellitus, symptoms of blurred vision in the morning, changes in central corneal thickness and endothelial cell density with time, need for corneal transplantation, and pre-operative corneal status in the two groups. Results: Of the 81 patients, 12 were shown to harbor a COL8A2 gene mutation. Individuals with mutation were significantly associated with presence of family history, diabetes mellitus, and blurred vision in the morning (p = 0.021, p = 0.024, p = 0.044, respectively). They also had significantly thicker central cornea and lower endothelial cell density at the time of diagnosis (p = 0.020, p = 0.005, respectively). The differences in central corneal thickness and endothelial cell density between the two eyes in one patient were significantly smaller in patients with gene mutation (p = 0.043, p = 0.022, respectively). Over a 5-year follow-up period, 60.0% of eyes in patients with gene mutation and 19.2% of eyes in patients without gene mutation underwent corneal transplantation, a significant difference between the two groups (p = 0.014). Conclusions: By testing for COL8A2 gene mutation, early binocular disease progression and the possible need for corneal transplantation in the future can be predicted among patients diagnosed with Fuchs dystrophy.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.4
• /
• pp.327-351
• /
• 2009

Laboratory tests are performed in this paper to investigate the brittle failure characteristics of over-stressed rocks taken in deep depth. Also, numerical simulation performed using that the so-called CWFS(Cohesion Weakening Frictional Strengthening) model is known to predict brittle failure phenomenon reasonably well. The most typical rock types of Korean peninsula - granite and gneiss - were used for testing. Results of uniaxial compression tests showed that the crack initiation stress was about 41 % to 42% of the uniaxial compressive strength regardless of rock types, where as, the crack damage stress of granite was about 75%, and that of gneiss was about 97%. Through the damage-controlled test, strength parameters of each rock were obtained as a function of damage degree. After the peak, the crack damage stress and the maximum stress were decreased, The cohesion was decreased and the friction angle was increased with increase of rock damage. Before reaching the peak, the elastic modulus was slightly increased, while decreased after the peak. Poisson's ratio was increased as the damage of rock proceeds. Comparison of uniaxial compression tests and damage-controlled tests shows the crack initiation stress estimated from the damage-controlled test fluctuated within the range of crack initiation stress obtained from the uniaxial compression test; the crack damage stress was less than that estimated from the uniaxial compression test. In order to predict the critical depth that brittle failure occurs, numerical simulations using the CWFS model were performed for an example site. Material parameters obtained from the laboratory tests mentioned above were used for CWFS simulation. Comparison between the critical depth predicted from the numerical simulation using the CWFS model and that predicted by using the damage index proposed by Martin et al.(l999), showed that critical depth cannot be reasonably predicted by the currently used damage index except for circular tunnels. A modified damage index was proposed by the author which takes the shape of tunnels other than circular into account.

• Korean Journal of Clinical Laboratory Science
• /
• v.56 no.2
• /
• pp.147-155
• /
• 2024

Gallium-68-prostate-specific membrane antigen-11 (⁶⁸Ga-PSMA-11) is a positron emission tomography radiopharmaceutical that labels a Glu-urea-Lys-based ligand with ⁶⁸Ga, binding specifically to the PSMA. It is used widely for imaging recurrent prostate cancer and metastases. On the other hand, the preparation and quality control testing of ⁶⁸Ga-PSMA-11 in medical institutions takes over 60 minutes, limiting the daily capacity of ⁶⁸Ge/⁶⁸Ga generators. While the generator provides 1,110 MBq (30 mCi) nominally, its activity decreases over time, and the labeling yield declines irregularly. Consequently, additional preparations are needed, increasing radiation exposure for medical technicians, prolonging patient wait times, and necessitating production schedule adjustments. This study aimed to reduce the ⁶⁸Ga-PSMA-11 preparation time and optimize the automated synthesis system. By shortening the reaction time between ⁶⁸Ga and the PSMA-11 precursor and adjusting the number of purification steps, a faster and more cost-effective method was tested while maintaining quality. The final synthesis time was reduced from 30 to 20 minutes, meeting the standards for the HEPES content, residual solvent EtOH content, and radiochemical purity. This optimized procedure minimizes radiation exposure for medical technicians, reduces patient wait times, and maintains consistent production schedules, making it suitable for clinical application.

• Journal of Genetic Medicine
• /
• v.7 no.2
• /
• pp.125-132
• /
• 2010

Purpose: Preimplantation genetic diagnosis (PGD), also known as embryo screening, is a pre-pregnancy technique used to identify genetic defects in embryos created through in vitro fertilization. PGD is considered a means of prenatal diagnosis of genetic abnormalities. PGD is used when one or both genetic parents has a known genetic abnormality; testing is performed on an embryo to determine if it also carries the genetic abnormality. The main advantage of PGD is the avoidance of selective pregnancy termination as it imparts a high likelihood that the baby will be free of the disease under consideration. The application of PGD to genetic practices, reproductive medicine, and genetic counseling is becoming the key component of fertility practice because of the need to develop a custom PGD design for each couple. Materials and Methods: In this study, a survey on the contents of genetic counseling in PGD was carried out via direct contact or e-mail with the patients and specialists who had experienced PGD during the three months from February to April 2010. Results: A total of 91 persons including 60 patients, 49 of whom had a chromosomal disorder and 11 of whom had a single gene disorder, and 31 PGD specialists responded to the survey. Analysis of the survey results revealed that all respondents were well aware of the importance of genetic counseling in all steps of PGD including planning, operation, and follow-up. The patient group responded that the possibility of unexpected results (51.7%), genetic risk assessment and recurrence risk (46.7%), the reproduction options (46.7%), the procedure and limitation of PGD (43.3%) and the information of PGD technology (35.0%) should be included as a genetic counseling information. In detail, 51.7% of patients wanted to be counseled for the possibility of unexpected results and the recurrence risk, while 46.7% wanted to know their reproduction options (46.7%). Approximately 96.7% of specialists replied that a non-M.D. genetic counselor is necessary for effective and systematic genetic counseling in PGD because it is difficult for physicians to offer satisfying information to patients due to lack of counseling time and specific knowledge of the disorders. Conclusions: The information from the survey provides important insight into the overall present situation of genetic counseling for PGD in Korea. The survey results demonstrated that there is a general awareness that genetic counseling is essential for PGD, suggesting that appropriate genetic counseling may play a important role in the success of PGD. The establishment of genetic counseling guidelines for PGD may contribute to better planning and management strategies for PGD.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.1
• /
• pp.146-153
• /
• 1997

Background : Chronic cough is commomly defined as a persistent or recurrent cough exceeding 3 week's duration. The prevalence of chroinc cough is reported to range from 14% to 23 % for nonsmoking adults. The post nasal drip syndrome has been determined to be the most common cause of chronic cough, followed by asthma, chronic bronchitis, gastroesophageal reflux and bronchiectasis. Cough can be the only manifestation of asthma. Bronchial provocation tests are useful in diagnosing cough variant asthma. We investigated the clinical or laboratory findings and the incidence of airway hyperresponsiveness and evaluated the etiology in patients with chronic cough. Method : We evaluated 46 patients with chronic cough. Methacholine challenge test were done. Results : The results were as follows : 1) Thirty - five percent(16/46) of the chronic cough patients and 44% of the post nasal drip syndrom(7/16) showed the positive responses to methacholine challenge test 2) The underlying causes of chronic cough were post nasal drip syndrome in 35%, bronchitis in 21.7%, cough-variant asthma in 17.4%, and unknown condition in 25.9%. 3) Airway hyperresponsiveness in chronic cough was not related to respiratory symptom, nasal symptom, post nasal drip, smoking, derangement of ventilatory function, atopy, or sinusitis. Conclusion : Airway hyperresponsivenss in patients with chronic cough increased in frequency when compaired with normal control, allergic rhinitis. Cough-variant asthma account for 17.4% of patients with chronic cough.

• Korean journal of applied entomology
• /
• v.46 no.1 s.145
• /
• pp.87-95
• /
• 2007

Many kinds of environment friendly agricultural materials were used for the insect pest control and the control of plant diseases, furthermore they support the growth of crops in the greenhouses and the kindly environment friendly farming. Phytoseiulus persimilis might be used for control of two-spotted mites with environment friendly agricultural materials at the same time. For testing the toxicity of environment friendly agricultural materials against to p. persimilis, 61 environment friendly agricultural materials were selected by material contents and using methods. When environment friendly agricultural materials were directly sprayed on P. persimilis, IEFAM C, FEFAM A, EFAMSM A, D, EFAMPE A, EFAMCh B, EFAMME A, and EFAMMo C killed over 90%. However, there was no effects to FEFAM C, D, EFAMSM C, EFAML A, EFAMME C, E, H, J, EFAMMo G and I against P. persimilis. P. persimilis adults were not survived in vial for 48 hours after sprayed and dried with the environment friendly agricultural materials, fer examples, EFAMSM I, EFAMME A, EFAMMo A, C, and I. Otherwise, EFAMCh C and EFAMMo B were no effects to P. persimilis. Some environment friendly agricultural materials are of different qualities, and consequently test of their foxily have to necessary.

• Journal of Animal Science and Technology
• /
• v.45 no.2
• /
• pp.191-198
• /
• 2003

This study was carried out to investigate a usefulness of the microsatellite DNA markers for individual identification and parentage verification in three dog breeds. A total of 59 random dog (31 Chiwawa, 20 Poongsan, 8 Labrador Retriever) samples were genotyped by using 14 markers (Chiwawa dog), 16 markers (Poongsan dog), and 12 markers (Labrador Retriever dog) among the 17 international standard markers (PEZ1, 3, 5, 6, 8, 10, 11, 12, 13, 15, 16, 17, 20, 21, FHC2010, FHC2054 and FHC2079), respectively. The number of alleles per locus varied from 4 to 14 with a mean value of 6.07 in Chiwawa dog, 2 to 9 with a mean of 4.75 in Poongsan dog, and 3 to 5 with a mean of 4.00 in Labrador Retriever dog. Observed heterozygosity was ranged 0.419${\sim}$0.968 (mean 0.755), 0.300${\sim}$0.950 (mean 0.597) and 0.125${\sim}$0.750 (mean 0.604), and expected heterozygosity was ranged 0.432${\sim}$0.883 (mean 0.711), 0.262${\sim}$0.817 (mean 0.559) and 0.425${\sim}$0.808 (mean 0.660) in these three dog breeds. PIC value was ranged 0.397${\sim}$0.856 (mean 0.659), 0.222${\sim}$0.772 (mean 0.503) and 0.354${\sim}$0.717 (mean 0.563) in these three dog breeds. Of the 17 markers, PEZ1, PEZ3, PEZ6, PEZ10, PEZ12 loci, PEZ1, PEZ6, PEZ13 loci, and PEZ8, PEZ12 loci have relatively high PIC value (＞0.7) in Chiwawa dog, Poongsan dog and Labrador Retriever dog, respectively. The exclusion probability was ranged 0.240${\sim}$0.741, 0.111${\sim}$0.616, and 0.198${\sim}$0.529, and the combination of microsatellite loci was 0.9999, 0.9991, and 0.9968 in Chiwawa dog, Poongsan dog and Labrador Retriever dog, respectively. These results can give basic information for developing parentage verification and individual identification system in these three dog breeds.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.3
• /
• pp.177-184
• /
• 2020

Purpose: The purpose of this study was to compare and evaluate the tensile bond strength of chairside reline resin to denture base resin fabricated by different methods (subtractive manufacturing, additive manufacturing, and conventional heat-curing). Materials and methods: Denture base specimens were fabricated as cuboid specimens with a width of 25 mm × length 25 mm × height 3 mm by subtractive manufacturing (VITA VIONIC BASE), additive manufacturing (NextDent Base) and conventional heat-curing (Lucitone 199). After storing the specimens in distilled water at 37℃ for 30 days and drying them, they were relined with polyethyl methacrylate (PEMA) chairside reline resin (REBASE II Normal). The subtractive and additive manufacturing groups were set as the experimental group, and the heat-curing group was set as the control group. Ten specimens were prepared for each group. After storing all bound specimens in distilled water at 37℃ for 24 hours, the tensile bond strength between denture bases and chairside reline resin was measured by a universal testing machine at a crosshead speed of 10 mm/min. The fracture pattern of each specimen was analyzed and classified into adhesive failure, cohesive failure, and mixed failure. Tensile bond strength, according to the fabrication method, was analyzed by 1-way ANOVA and Bonferroni's method (α=.05). Results: Mean tensile bond strength of the heat-curing group (2.45 ± 0.39 MPa) and subtractive manufacturing group (2.33 ± 0.39 MPa) had no significant difference (P>.999). The additive manufacturing group showed significantly lower tensile bond strength (1.23 ± 0.36 MPa) compared to the other groups (P<.001). Most specimens of heat-curing and subtractive manufacturing groups had mixed failure, but mixed failure and adhesive failure showed the same frequency in additive manufacturing group. Conclusion: The mean tensile bond strength of the subtractive manufacturing group was not significantly different from the heat-curing group. The additive manufacturing group showed significantly lower mean tensile bond strength than the other two groups.