• Analytical Science and Technology
• /
• v.31 no.3
• /
• pp.134-142
• /
• 2018

The uranium isotopic ratio in environmental samples around nuclear facilities is important because it reveals information regarding illegal activities or anthropogenic pollution. Determination of uranium isotopes, however, is a challenging task requiring much labor and time because of the complex separation procedures and lengthy process. In this study, a rapid determination method for uranium isotopes in environmental samples was developed using. The sample was completely decomposed using the alkali fusion method. The separation procedure using extraction chromatography (UTEVA) was simplified in a single step without any further removal process for Si and major matrix elements. The established method can be completed within 3 h from sample dissolution to ICP-MS measurement. Most matrix elements and uranium isotopes in the soil samples were well separated and purified. Five types of were used to assess the method's accuracy and precision for a rapid uranium analysis method. The analytical accuracy for all CRM samples ranged from 95.1 % to 97.8 %, and the relative standard deviation was below 3.9 %. From the analytical results, one may draw conclusions that the evaluated method for uranium isotopes using alkali-fusion, the extraction chromatography process, and ICP-MS measurements is fast and fairly reliable owing to its recovering efficiencies. Thus, it is expected that the evaluated method can contribute to the improvement of environmental monitoring ability.

• Journal of IKEEE
• /
• v.26 no.2
• /
• pp.219-225
• /
• 2022

The textile industry in Korea, the dyeing sector is an energy-intensive sector and has low per-unit productivity due to its labor-intensive nature. If the defective rate of dyed fabrics is high, additional costs are incurred due to an increase in production cost due to re-dyeing. Therefore, the goal of the dyeing factory was to minimize the defect rate rather than to save energy. It was difficult to check the dyeing state of the fabric in real time due to the risk of accidents due to burns or pressure when dyeing in a high-temperature and high-pressure environment. In this paper, a complex sensor that can measure the exhaustion rate of dye solution in the dyeing machine using turbidity, pH, and conductivity sensors was proposed, and the experimental method and experimental results were analyzed.

• Environmental and Resource Economics Review
• /
• v.21 no.2
• /
• pp.371-416
• /
• 2012

This study has developed Computable General Equilibrium (CGE) model reflecting endogenous growth economic theory, with the aim of analyzing double dividend hypothesis. This study analyzes possibility of economic growth and environmental improvement at the same time when government recycles the revenue of carbon tax to reduce existed taxes such as consumption tax, labor income tax, corporate tax. It also assesses the case of subsidy on R&D investment of renewable energy. With new and renewable generation technology adopted and disseminated, GDP loss would be lessened to a great degree. Tax recycling would provide economic gain by reducing distortion existed in the existing fiscal structure. The magnitude of economic gains from carbon tax recycling is biggest for recycling into corporate tax, and labor income tax, and then consumption tax in this order. It is also shown that double dividend effects occur in dynamic terms when government uses a carbon tax revenue to subsidize on R&D investment. At the end of the analysis period, emissions reduction would not result in GDP loss but in GDP gain. In particular, recycling into R&D increase would produce the largest and fastest GDP gain. Thus, implementing emissions reduction target would require careful consideration of economic effects by various policy instrument, including carbon tax.

• Environmental and Resource Economics Review
• /
• v.23 no.2
• /
• pp.225-248
• /
• 2014

The purpose of this study is to estimate the optimal tax rate for gasoline in Korea, by utilizing both the parameters for the estimation of the optimal fuel taxes and the theoretical model considering externalities proposed by Parry and Small (2005). The result of simulation shows that the optimum fuel taxes in Korea is calculated in 382 korean won per liter, which is lower than fuel tax rate(529 korean won per liter) currently being imposed. The fuel tax is composed of two types of tax. First is Pigouvian tax caused by negative externality such as traffic congestion and accidents etc. And second is Ramsey tax for optimal commodity sales taxes. We find that Pigouvian tax in Korea is higher than one of U.S. and U.K and Ramsey tax is very small due to the inelastic labor supply comparing to consumption elasticity of fuel. When adjusting the elasticity of labor supply to the UK level, the optimal fuel tax in Korea is very close to the current level of 480 korean won per liter. This paper contributes to suggest the reasonable estimation and discussion in the social optimum fuel tax rates by utilizing the theory and simulation and improve the possibility of the derivation of optimum fuel taxes through both securing the exact parameters and modifying the theoretical model suitable for Korea.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.4
• /
• pp.343-351
• /
• 2014

Washing machines designed to clean laundry have been more widely used at home as they reduce household labor and boost the quality of life. Technological advances and better standards of life increase demand for laundry washing performance. Energy efficiency regulations and consumer demand for the larger trend, washing machine makers should be done in performance studies to reduce power, and water consumption and the load on power transmission devices. In this study, performance of a fully automatic washing machine with unconstrained transmission is analyzed through experiment and CFD simulation. It is found that the interaction between laundry and transmission change the washing behavior and affect washing performance with regard to the degree of freedom. The results obtained in this study can be used in developing new washing machine transmissions and make them more robust.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.537-540
• /
• 2006

국제 유가의 상승으로 대체 에너지개발의 필요성이 대두되고 있는 지금 수송연료인 디젤의 대체 원료로 바이오디젤이 부각되었다. 차세대 대체연료인 바이오디젤의 합성 원료의 국산화로 수급의 안정성과 농가소득향상을 위해서 국내산 유채 착유기의 개발 및 유지의 함량을 측정하고 바이디젤로서의 적용가능성을 살펴보며 유박에서의 유지 추출 Biomass활용방안을 도출한다 국내산 유채 착유기 및 착유기술 평가를 통해 중소형 유채 착유기의 제작과 기본 조건을 도출을 위해 유채 착유실험을 진행하였다. 유채유의 착유온도에 따른 물성변화와 산가, 수분, 착유율의 변화와 영향을 확인하기 위해 roaster의 온도를 고온과 저온으로 나누어 착유하여 각각의 물성 실험과 산가, 수분, 착유율을 측정 비교하였다. 유채유는 저온보다 고온에서 착유량이 높으나 많은 검질과 높은 산가로 인해 바이오디젤 합성과정에 많은 어려움을 나타내었다. 유채의 유박을 바이오디젤과 에탄올로 각각 Extraction.한 결과 바이오디젤보다는 에탄올이 적용 가능성이 높음을 확인하였다.

• Korean Journal of Agricultural Science
• /
• v.37 no.1
• /
• pp.113-121
• /
• 2010

Land consolidation ratio for rice paddy fields reached to 64.7% as of 2008 in Korea, and this also accelerated automation of field machinery. Especially, research on autonomous tractors has been continuously conducted. Tillage is one of the labor-, energy-, and time-consuming field operations. Most important requirements for autonomous tractors would be travelling path planning and electronic system to control the tractor to follow the path. The instruction of computer was required to conduct the tillage operation in field with unmanned traveling tractor. This instruction was coincidently used in the control of the traveling path and the motion of tractor. The objectives of the study were 1) to characterize and model tillage operating sequence, turning pattern, and 2) to develop tillage path formation programs for autonomous tractor and evaluate the performance.

• KDI Journal of Economic Policy
• /
• v.34 no.4
• /
• pp.1-26
• /
• 2012

Greenhouse gas emission policy in Korea and elsewhere is based on emissions projections, a key element of which is the projected path of structural change from high productivity growth to low productivity growth economic sectors given sector specific labor productivity growth, emissions abatement across sectors and population growth. Thus, it is important to model the source of the structural change to forecast emissions correctly. Using data for the Korean economy, this study constructs and quantitatively evaluates a model of structural change and green growth to generate policy implications for Korea and the international greenhouse gas debate.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.211-215
• /
• 1989

This paper presents the thermal analysis of EHV OF cable accessories using FEM. The governing equation about the temperature in the cable accessories is induced by the energy balance equation. Since the temperature distribution is a function of space and time, the weighted residual method is adopted for FEM formulation. The difference approximation is used to treat the time differential term in the element equation. Automatic mesh generation which save time and labor is introduced for the data input process. It will be expected that the following thermal analysis result will be very useful to cable accessories design.

• 유체기계공업학회:학술대회논문집
• /
• 2005.12a
• /
• pp.126-132
• /
• 2005

UV disinfection system allows the disinfection of municipal and industrial water and wastewater without the use of expensive chlorination and dechlorination techniques, labor intensive equipments In traditional ultraviolet systems the UV lamps are seperated from water by quartz sleeves. quartz is one of. the few materials that is virtually transparent to UV light, the UV lamp is placed inside the Quartz sleeve. UV light from the lamp is passed through the quartz and into the water, thereby providing disinfection. In fluoropolymer tube-used non-contact UV systems, the water flows through fluoropolymer plastic tubes. banks of UV lamps surround these tubes such that each tube gets exposed to ultra violet light from all sides. in non-contact design the lamps operates at almost constant temperature. this design is extremly efficient in the utilization of UV energy and superior to conventional contact- systems.