• Carbon letters
• /
• v.9 no.4
• /
• pp.324-339
• /
• 2008

The principal aims of the review paper are (1) to establish broad overview information, both qualitative and quantitative, relating to the world market for polyacrylonitrile (PAN) or pitch-based carbon fibers; and (2) to generate an effective analysis and break down of consumption by process route and eventual end-use. The review paper also designed specifically to provide subscribers with an accurate, independent, and realistic assessment of the current status and future perspective of the market for carbon fibers in the world. The world market for carbon fibers continues to grow rapidly, fuelled by new industrial end uses, such as sport and leisure goods, aerospace, automotive applications, civil engineering and infrastructure repair, and immerging applications in energy generation. Demands for properties of carbon fibers used in those applications include many things such as strength, toughness, fatigue property, corrosion resistance, heat resistance, etc., and these become to be higher level. On the other hand, demands for manufacturing technologies of carbon fibers become to be difficult with these demands for properties, and these are wide variety such as high efficiencies, high qualities, many functions, labor saving, and low cost. In this review paper, thus, the recent carbon fibers corresponded to these needs, and its latest manufacturing technologies as well as market prospects are described.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.7 s.178
• /
• pp.1650-1660
• /
• 2000

Continuous casting process has been adopted increasingly in recent years to save both energy and labor. It has experienced a rapid development in the production of semi-finished steel products, rep lacing the conventional route of ingot casting and rolling. In order to achieve this merit, however, more studies about the mechanism between roll and slab are needed. In this paper, a dynamic bulging in steel cast slabs was simulated by considering the solidification and heat transfer. This study is to prevent internal cracks of a slab in a bending and unbending zone. The value of moving strand shell bulging between two supporting rollers under the ferrostatic pressure and slab-self weight has been calculated in terms of creep and elasto-plasticity. The strain and strain rate distributions in solidified shell undergoing a series of bulging are calculated with working boundary conditions.

• Journal of Biosystems Engineering
• /
• v.36 no.3
• /
• pp.171-179
• /
• 2011

Facing the current hikes of labor wage and high oil price, it is needed to have energy-saving machinery which also enables us precise farm operations. Thus, it was necessary to develop a safe machine which allows secure and pleasant works along orchard slopes. In this study, a lifting utility with balance-controlled platform was developed. The platform utility could maintain to level the workbench while driving along slopes. Even the machine body was driven at the tilt angle ranges of ${\pm}20^{\circ}$, the platform bench could be maintained within ${\pm}0.5^{\circ}$ of a gimbal angle. In addition, the machine lifted up to 2.0 m using an electric-hybrid driving mechanism with a low noise. A tandem hybrid power source was developed with a DC 72 V, 100 AH for the Deep-Cycle batteries, charged with 3.5 kW gasoline generator as an auxiliary power source. HST, which is one of the CVT's, was adopted as a transmission device, and a crawer track was used for the safety of the vehicle against tip-over. The maximum lifting height of platform was is 2,500 mm, and the maximum extendable width was 2,900 mm.

• Journal of Families and Better Life
• /
• v.14 no.1
• /
• pp.1-10
• /
• 1996

Researchers have largely overlooked the direct effects of household responsibil-ities on earnings in stead focusing attention the effect of woman's employment on the division of household labor or on family life. Given that a substantial proportion of married women already work outside the home and their numbers are likely to be increae to some extent those concerned with the well-being of employed-married women and of their households may focus their attention on how best to provide good policy to manage woman's dual roles. The purposes of the study are as follows; 1) To find out factors which affect women's housework time. 2) To examine the relationship between housework and market work. Data are obtained from 259 households with employed-married women living in Seoul. The results of this study are as follows: 1) women's wages are reduced by time spent on housework. Women's housework time is insignificantly related to women's wages. 2) women's occupation statues is signific ntly positively related to their wages. 3)women's age and other family income are generally negatively related to their housework time,. The results of this study indicate that housework has a direct effect on wages by reducing the amount of energy and efforts available for market work lowering economic status of women.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.05a
• /
• pp.186-189
• /
• 2001

In keeping with the needs of the times for energy and labor saving and simplifying production processes, interests has been growing in warm forging. Moreover, it is interested in increasing the material usage and production amounts. To improve the productivity and material usage, it is studied the process design of warm forging for socket. Until now, socket is manufactured by hot forging in hammer. The percentage of material usage is under $60\%$ in hammer forging. On the other han4 the percentage can be increased over $90\%$ in warm forging. To change the process from hot forging to warm forging, process designs must be performed. In this time, by using the FEM package, DEFORM-3D, we could get the shape of 1st process and minimum sealing pressure. They are very essential design data to decrease the trial and error. Practically, the overlap defect could be detected and eliminated with design modification of rib height and fillet radius. Moreover, forging load and minimum sealing pressure was defined by the 3D FEM analysis.

• Journal of Welding and Joining
• /
• v.9 no.4
• /
• pp.50-59
• /
• 1991

Large steel water pipes in Korea are joined prevalently by bell end method and welded at inside as well as outside of the pipes with the length of leg which is same as or larger than the thickness of pipes. This results in an excessive consumption of material and labor compared with foreign counturies such as USA, so that in our recent situation of requiring a number of water pipes such consumption is very ineffective and an improvement in weld design of water pipes is urgently necessary. In this experimental study, the possibility of reducing the length of leg to 85% of the pipe thickness was investigated through observations of microstructure and cross section of weldments, the tensile test, and the impact test of the field and laboratory specimens. As the results of this study, it was revealed that water pipes which have the leg of fillet about 0.8xthickness show a good weldability, have a greater strength than the base metal and absorb the enough energy to be safe in the working condition of the pipes.

• Journal of Environmental Science International
• /
• v.26 no.10
• /
• pp.1185-1200
• /
• 2017

Solid waste management is currently a topic of concern, particularly in the protection of humans and the environment from toxic pollutants and hazardous materials. The importance of solid waste management is recognized at international, national, and community levels. Different agendas have been prioritized and assigned to improve quality of life, productivity, and health, and reduce the burden of pollution. Suitable management of solid waste requires appropriate technology that is affordable, socially accepted, and environmentally friendly. The use of a smart management system involving system dynamics can save energy, money, and labor. System dynamics is a computer-based approach that aids in predicting the behavioral patterns of variables, and correlating dependent and independent variables. The inclusion of system dynamics-based models in solid waste management has recently become more common. In this review, we used system dynamics to determine methods to disentangle solid waste management systems and analyzed different studies on solid waste management using system dynamics in different countries in detail. We also discussed the various software packages that are available for system dynamics and their usefulness for waste management. This review may help in understanding current solid waste management practices using system dynamics.

• Korean Journal of Rural Living Science
• /
• v.9 no.2
• /
• pp.43-50
• /
• 1998

To obtain basic data for efficient health plan, we investigated the condition of farmers' health, living behavior, working environment, and cumulative fatigue symptoms by crops (greenhouse melon, rice and red pepper, stock farming, pear, grapes, dropwort, sweet potato, potato, radish. cabbage). The results are as follows; (1) The condition of farmers health : Among them, cabbage cultivators were in bad health concerning cardiovascular system, musculo-skeletal system, and skin condition. (2) Living behavior : $\circled1$ Radish cultivators were in best of their physical condition. $\circled2$ Rice and red pepper cultivators were taking a regular recess as compared with dropwort cultivators. $\circled3$ On concerning bathe, sleeping, and clothes, stock farmers were in relatively bad condition. (3) Working environment : cabbage, greenhouse melon, and dropwort cultivators had relatively Poor working environment. (4) Cumulative fatigue symptoms : $\circled1$ Dropwort cultivators were in the worst of their condition concerning loss of their energy, physical condition. decline of will to labor, sense of unease, and low spirits. $\circled2$ On concerning general fatigue, dropwort, sweet potato, and cabbage cultivator were in bad condition.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.6
• /
• pp.577-584
• /
• 2020

Construction automation and robotics have been widely adopted in the construction industry as a promising solution to such issues like a shortage of skilled labor and the difficulties workers face in harsh working environments. The analysis of the knowledge structure and its evolution from the existing articles helps identify essential knowledge elements and possible future research directions. This study attempts to (1) construct keyword networks from the papers published in the International Symposium on Automation and Robotics in Construction (ISARC), (2) investigate how keywords and keyword communities are associated with each other, and (3) examine the changes in the crucial keywords over time. Through cluster analysis, 79 keywords were categorized into four groups (BIM, Building construction, Sensing, and GPS as representative keywords) with similar structural positions. Research trends show that research themes related to Infrastructure, Construction equipment, and 3D have consistently received a large amount of attention, regardless of geographical region. Research on as-built status model utilization through BIM and Laser scanning and improving Energy performance is taking place more frequently. In contrast, research studies related to problem-solving based on Neural networks are not as common as previously. This study provides useful insights into the construction automation field, at both the macro and micro levels.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11c
• /
• pp.722-728
• /
• 2000

This study of field control machine in the recycled vinyl rail is gantry crane type and promoting agricultural automatization through self-controlled spraying, harvesting and conveyance. In addition to, that control machine could get a cost and labor reduction effect through automatization and make better environment by preventing farmers from agrichemical damage, accidents and recycling wasted vinyl. That machine is able to be divided as traveling, spraying, harvesting and conveyance sections. In driving section consists of girder frame, carrier, rail, control system, driving system, working machine, rail and loading device for working machine. This machine has following advantages to be able to bring a big innovation in the agricultural industry. I) Accurate performance is able to be done by proper positioning due to based on the rails. 2) The soil is not made hard like heavy tractor 3) The wheel is not sank into the soil and slipped well under rain like heavy tractor. Therefore, weather and soil situation could not affect working condition. 4) Complete unmanned control and 24hours-working are available due to traveling on the rails. 5) It could use various energy resources like not only liquid fuel but also solar, common electronic power due to traveling on the rails.