• 제목/요약/키워드: labor energy

검색결과 171건 처리시간 0.029초

Experimental study on seismic behavior of RC beam-column joints retrofitted using prestressed steel strips

  • Yang, Yong;Chen, Yang;Chen, Zhan;Wang, Niannian;Yu, Yunlong
    • Earthquakes and Structures
    • /
    • 제15권5호
    • /
    • pp.499-511
    • /
    • 2018
  • This paper aims to investigate the seismic performance of the prestressed steel strips retrofitted RC beam-column joints. Two series of joint specimens were conducted under compression load and reversed cyclic loading through quasi-static tests. Based on the test results, the seismic behavior of the strengthened joints specimens in terms of the failure modes, hysteresis response, bearing capacity, ductility, stiffness degradation, energy dissipation performance and damage level were focused. Moreover, the effects of the amount of the prestressed steel strips and the axial compression ratio on seismic performance of retrofitted specimens were analyzed. It was shown that the prestressed steel strips retrofitting method could significantly improve the seismic behavior of the RC joint because of the large confinement provided by prestressed steel strips in beam-column joints. The decrease of the spacing and the increase of the layer number of the prestressed steel strips could result in a better seismic performance of the retrofitted joint specimens. Moreover, increasing the axial compression ration could enhance the peak load, stiffness and the energy performance of the joint specimens. Furthermore, by comparison with the specimens reinforced with CFRP sheets, the specimens reinforced with prestressed steel strips was slightly better in seismic performance and cost-saving in material and labor. Therefore, this prestressed steel strips retrofitting method is quite helpful to enhance the seismic behavior of the RC beam-column joints with reducing the cost and engineering time.

선미 웨지가 차인선형의 조파저항에 미치는 영향 (Effect of Stern Wedge on the Wave Making Resistance of Chine Hull Form)

  • 이대훈;유재문;강대선
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제9권2호
    • /
    • pp.92-97
    • /
    • 2006
  • 수치계산을 통해 소형 고속선의 선형설계를 수행하였다. 선형변환 프로그램인 HCAD를 사용하고 차인형 선형을 기준선으로 하여 둥근바닥 선형을 설계하였다. WAVIS를 시용하여 두 가지 선형에 대한 선체주위의 유동장과 조파저항 계산 결과를 보였다. 차인형 선형의 저항특성이 둥근 바닥선형에 비해 다소 크게 나타났으나 소형 조선소의 건조비를 감안하여 차인형 선형의 선수부 개량과 선미 웨지의 설계를 통해 조파저항의 감소를 시도하였다. 수치계산 결과 선미 웨지의 적용에 의해 차인형 선형의 조파저항성능이 고속영역에서 개선되었음을 확인하였다.

  • PDF

Theoretical Design for the Production of Quinoa (Chenopodium quinoa Willd.) in a Closed Plant Factory

  • Bae, Jong Hyang;Austin, Jirapa;Jeon, Yoon-A;Cha, Mi-Kyung;Cho, Young-Yeol
    • 원예과학기술지
    • /
    • 제34권6호
    • /
    • pp.840-844
    • /
    • 2016
  • Quinoa (Chenopodium quinoa Willd.) is a grain crop with high nutritional value. The leaves and sprouts of quinoa can also be consumed either raw or cooked, providing considerably nutritional value as well as high antioxidant and anticancer activities. This study was carried out to obtain basic data to assist in the practical design of a plant factory with artificial lighting for the cultivation of quinoa as a leafy vegetable. We estimated the energy content of the quinoa and the electrical energy required to produce this crop. The yield was 1,000 plants per day, with a planting density and light intensity of $0.015m^2$ ($15{\times}10cm$) and $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, respectively. The total number of plants, cultivation area, and electricity consumption were estimated to be 25,000, $375m^2$, and $93,750{\mu}mol{\cdot}s^{-1}$, respectively. White fluorescent lamps were used at a power of 20.4 kW from 1,857 fluorescent lamps (FL, 55 W), and the cost for electricity was approximately 1,820 dollars (exchange rate of $1 = 1,200 won) per month. For a daily harvest of 1,000 plants per day in a closed plant factory, the estimated light installation cost, total installation cost, and total production cost would be 15,473, 46,421, and 55,704 dollars, respectively. The calculated production cost per plant, including labor costs, would be 27 cents for the 25-day cultivation period, with a marketable ratio of 80%. Considering the annual total expenses, income, and depreciation costs, the selling price per plant was estimated to be approximately 56 cents.

전력구트라프간접수냉방식에서의 지중송전케이블에 대한 열해석 (A Thermal Analysis for the Underground Power Transmission Cable by a Water Pipe Cooling Method with Trough in Tunnel)

  • 박만흥
    • 태양에너지
    • /
    • 제15권3호
    • /
    • pp.59-73
    • /
    • 1995
  • 원활한 전력공급을 위해 지중송전케이블에서 발생된 열을 제거하기 위한 방법으로 전력구트라프간접수냉방식이 적용된 지중송전계통에 대한 각 주요 구성요소의 열해석을 수행하였다. 열해석을 수행한 결과, 주어진 조건에서 냉동기가 채택된 냉동장치에서는 냉각수유량은 $2{\sim}3{\ell}/s/pipe$, 팬에 의한 풍속은 $1{\sim}2m/s/fan$인 경우에 지중송전계통의 원활한 전력공급을 위한 냉각계통의 최적조건으로 계산되었다. 반면에 냉각탑만을 설치한 경우에는 냉각수유량 및 풍속이 각각 $2{\sim}3s/pipe$ 및 6 m/s/fan이 최적조건으로 계산되었다. 그러나 냉각탑만이 설치된 경우에는 풍속이 너무 커져서 용량이 큰 팬의 설치 및 전력구내에서 작업자의 작업조건에 적합하지 않다. 따라서 본 연구의 주어진 조건하에서 지중송전계통의 냉동계통은 냉동기가 설치된 냉동장치가 바람직하다.

  • PDF

조경분야 탄소성적표지제도 적용실태 및 대응전략 (Status and Response Strategies of Carbon Labeling in Landscape Architecture)

  • 김정호;윤용한
    • 한국환경과학회지
    • /
    • 제24권6호
    • /
    • pp.709-720
    • /
    • 2015
  • After analyzing the actual acquisition status of carbon labeling by year and by product for the past four years, as well as its certification in the construction-related sectors of greenhouse gas emission, this study attempted to present the problems and coping strategies upon issuing the carbon labeling certification in the landscape architecture. During the period of this analysis, the carbon labelings were acquired by 134 enterprises, 267 workplaces, and 735 products, while the percentage of acquisition was highest in the regular non-durable goods(49%), followed by energy-consuming durable goods(26%), regular production goods (19%), regular durable goods(3%), and service(3%). Furthermore, the acquisition certifications in construction sectors, were highest in the various pipes/panel(8 cases), followed by concrete(6 cases), gypsum board(4 cases), and landscape architecture materials(2 cases). The landscape architecture only had two cases in the acquisition certification for the first time in 2012, which accounted for 0.27% of the entire certification products, due to the uncertainty in the process, the lack of professionalism, and the lack of comprehension. However, the study conducted on the coping strategies for carbon labeling in the landscape architecture revealed the following: (1) regular reporting system management through the division of labor in the head office and factories, (2) the building of objective DB through the adoption of data management programs such as SAP, (3) continuous promotion and vitalization of the incentive system, (4) the adoption of mandatory or preferential application system in landscaping projects, management, and bidding, (5) enhancement of elasticity in deliberation of certification by recruiting experts in the landscape architecture sectors, and (6) provision of incentives for the cooperative firms acquiring the certification and support for their participation.

녹색산업의 지역경쟁력 확보를 위한 산업유형별 클러스터 형성방안에 관한 연구 (A Study on the Formation Plan of Green Cluster by Sectoral Type for the Enhancement of Regional Competitiveness in Green Industry)

  • 김수경;이주형
    • 한국산학기술학회논문지
    • /
    • 제14권3호
    • /
    • pp.1081-1089
    • /
    • 2013
  • 본 연구는 국내 녹색산업의 경쟁력 강화를 위한 클러스터 형성방안을 제시하고자, 녹색산업의 지역경쟁력과 영향요인을 분석했다. 첫째, 신재생에너지산업은 경기, 경남, 충북, 충남, 울산, 전남에서, 탄소저감산업은 울산, 경기, 경북, 충남, 서울, 충북, 인천에서 각각 경쟁력이 있는 것으로 나타났다. 둘째, 신재생에너지산업은 기업, 노동, 연구개발 등의 요소조건 부문이, 탄소저감산업은 성과, 정책 제도, 시장점유, 산업특화 등의 구조 및 경쟁 부문이 가장 중요한 요인으로 분석되었다. 셋째, 녹색산업은 기존의 산업기반이 양호한 지역에서 상대적으로 경쟁력이 있는 것으로 나타났다. 따라서 국내 녹색산업의 경쟁력 강화를 위해서는 기존 산업기반의 녹색화와 더불어 선택과 집중의 전략이 요구된다.

Comparison of Safety Perception between Foreign and Local Workers in the Construction Industry in Republic of Korea

  • Korkmaz, Serdar;Park, Dal Jae
    • Safety and Health at Work
    • /
    • 제9권1호
    • /
    • pp.53-58
    • /
    • 2018
  • Background: Since the Republic of Korea became a labor-force-importing country, the number of foreign workers has increased gradually, especially in the construction industry. The main objective of this study was to examine the differences in safety perception between domestic and foreign workers at Korean construction sites. Methods: A total of 891 Korean and foreign workers were surveyed: 140 foreign and 751 Korean workers. The general characteristics and 25 factors influencing safety perception were considered in the questionnaire. Regression and correlation analyses were conducted to examine the variables of workers' safety perception. Results: Differences of nationality (F = 7.379, p < 0.001) and workplace accidents were statistically significant for both domestic (F = 1.503, p < 0.05) and foreign workers (F = 7.868, p < 0.05). In contrast, age, education, and Korean language level were significant variables only for foreign workers. Correlation coefficients of $0.428^{**}$ for Korean and 0.148 for foreign workers between two items - namely, "management's commitment to safety" and "blaming staff when they make mistakes" - support the conclusion that foreign workers do not trust management's commitment to safety, while Korean workers have confidence in these commitments. Conclusion: Foreign workers' level of safety perception should rise to the same level as Korean workers, especially in terms of obeying safety rules, safety education performance, and safety beliefs. Therefore, an improvement plan for the Korean construction industry is suggested in order to have a better safety level at construction sites with foreign workers.

전통 유과가공공정의 분석(I): 수침 및 꽈리치기 공정 (Analysis of Traditional Process for Yukwa Making, a Korean Puffed Rice Snack (I): Steeping and Punching Processes)

  • 강선희;류기형
    • 한국식품과학회지
    • /
    • 제34권4호
    • /
    • pp.597-603
    • /
    • 2002
  • 유과가공공정의 개선 및 새로운 공정개발을 위하여 전통적인 유과가공공정의 올바른 분석이 중요하다. 전통적인 유과제조 공정에서 많은 시간을 필요로 하는 수침공정과 꽈리치기 공정을 분석하였다. 찹쌀의 수침은 증자만을 고려한다면 $15^{\circ}C$에서 3일 수침으로 충분하였지만 전통유과 특유의 부드러운 조직감은 6일 이상의 수침이 필요하였다. 수침한 찹쌀의 변화를 관찰한 결과 찹쌀 과피층에 존재하는 단백질이 감소하였고 수침한 찹쌀가루의 페이스트점도는 7일 수침한 찹쌀가루가 최대점도를 나타내고 감소하는 경향을 보였다. 수침에 의한 찹쌀 전분의 미세구조를 관찰한 결과 수침공정을 통해 전분표면이 손상되었다. 수침시간의 증가와 함께 유과의 팽화도는 증가하는 경향을 보였다. 꽈리치기에서 수침시간이 증가할수록 기공의 크기는 감소하였으며 균일한 기공의 분포를 나타내었고 반죽에너지 투입량은 감소하였다. 전통유과의 특징인 부드러운 조직감은 수침시간의 조절뿐만 아니라 반죽에너지 투입량의 조절에 의해 조절이 가능할 수 있었다.

Experimental study on seismic behavior of reinforced concrete column retrofitted with prestressed steel strips

  • Zhang, Bo;Yang, Yong;Wei, Yuan-feng;Liu, Ru-yue;Ding, Chu;Zhang, Ke-qiang
    • Structural Engineering and Mechanics
    • /
    • 제55권6호
    • /
    • pp.1139-1155
    • /
    • 2015
  • In this study, a new retrofitting method for improving the seismic performance of reinforced concrete column was presented, in which prestressed steel strips were utilized as retrofitting stuff to confine the reinforced concrete column transversely. In order to figure out the seismic performance of concrete column specimen retrofitted by such prestressed steel strips methods, a series of quasi-static tests of five retrofitted specimens and two unconfined column specimen which acted as control specimens were conducted. Based on the test results, the seismic performance including the failure modes, hysteresis performance, ductility performance, energy dissipation and stiffness degradation of all these specimens were fully investigated and analyzed. And furthermore the influences of some key parameters such as the axial force ratios, shear span ratios and steel strips spacing on seismic performance of those retrofitted reinforced concrete column specimens were also studied. It was shown that the prestressed steel strips provided large transverse confining effect on reinforced concrete column specimens, which resulted in improving the shearing bearing capacity, ductility performance, deformation capacity and energy dissipation performance of retrofitted specimens effectively. In comparison to the specimen which was retrofitted by the carbon fiber reinforced plastics (CFRP) strips method, the seismic performance of the specimens retrofitted by the prestressed steel strips was a bit better, and with much less cost both in material and labor. From this research results, it can be concluded that this new retrofitting method is really useful and has significant advantages both in saving money and time over some other retrofitting methods.

Utilizing Mean Teacher Semi-Supervised Learning for Robust Pothole Image Classification

  • Inki Kim;Beomjun Kim;Jeonghwan Gwak
    • 한국컴퓨터정보학회논문지
    • /
    • 제28권5호
    • /
    • pp.17-28
    • /
    • 2023
  • 포장도로에서 발생하는 포트홀은 고속 주행 차량에 치명적인 영향을 미치며, 사망사고를 유발할 수 있는 도로상의 장애물이다. 이를 방지하기 위해 일반적으로는 작업자가 직접 포트홀을 탐지하는 방식을 사용해왔으나, 이는 작업자의 안전 문제와 예측하기 어려운 범주에서 발생하는 모든 포트홀을 인력으로 탐지하는 것이 비효율적이기 때문에 한계가 있다. 또한, 도로 환경과 관련된 지반 환경이 포트홀 생성에 영향을 미치기 때문에, 완벽한 포트홀 방지는 어렵다. 데이터셋 구축을 위해서는 전문가의 지도하에 라벨링 작업이 필요하지만, 이는 매우 시간과 비용이 많이 필요하다. 따라서, 본 논문에서는 Mean Teacher 기법을 사용하여 라벨링된 데이터의 샘플 수가 적더라도 지도학습보다 더욱 강인한 포트홀 이미지 분류 성능을 보여준다. 이러한 결과는 성능지표와 GradCAM을 통해 입증되었으며, 준지도학습을 사용할 때 15개의 사전 학습된 CNN 모델이 평균 90.41%의 정확도를 달성하며, 지도학습과 비교하여 2%에서 9%의 차이로 강인한 성능을 나타내는 것을 확인하였다.