• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.4
• /
• pp.427-436
• /
• 1999

This paper describes an ECG signal labeling algorithm based on fuzzy clustering, which is very useful to the automated ECG diagnosis. The existing labeling methods compares the crosscorrelations of each wave form using IF-THEN binary logic, which tends to recognize the same wave forms such as different things when the wave forms have a little morphological variation. To prevent this error, we have proposed as ECG signal labeling algorithm using fuzzy clustering. The center and the membership function of a cluster is calculated by a cluster validity function. The dominant cluster type is determined by RR interval, and the representative beat of each cluster is determined by MF (Membership Function). The problem of IF-THEN binary logic is solved by FCM (Fuzzy C-Means). The MF and the result of FCM can be effectively used in the automated fuzzy inference -ECG diagnosis.

• The Korean Journal of Food And Nutrition
• /
• v.35 no.6
• /
• pp.537-542
• /
• 2022

This study was conducted to provide basic data on the amount of sodium and the setting of permissible error range of actual measurement, which is a problem for cabbage kimchi nutrients subject to labeling. The sample targeted was baechu (Kimchi cabbage) kimchi, which might have a large variation in sodium content by part of kimchi. Kimchi samples were collected twice from eight companies by season (spring, summer, fall, and winter). The average sodium content in kimchi samples was 619±87 mg/100 g (range, 534±63 mg/100 g to 783±40 mg/100 g). The error in average annual sodium content of abandonment kimchi (maximum value difference compared to the minimum value) was 26.8 to 64.3%. Sodium contents in kimchi produced in spring and summer were relatively low. However, deviation between individuals was large. It was found that cases exceeding the permissible error (120%) standard varied depending on the criteria for setting the amount of sodium. In addition, due to seasonal differences, sodium content in kimchi exceeded 120% of the labeling value. Thus, it is necessary to set standards suitable for characteristics of kimchi to prevent unintentional violations of labeling standards by raw materials and manufacturing processes.

• The monthly packaging world
• /
• s.211
• /
• pp.72-77
• /
• 2010

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.5
• /
• pp.497-502
• /
• 1997

In this study an automatic rolling-coil labeling system using robot vision system and peripheral mechanism is proposed and implemented, which instead of the manual labor to attach labels Rolling-coils in a steel mill. The binary image process for the image processing is performed with the threshold, and the contour line is converted to the binary gradient which detects the discontinuous variation of brightness of rolling-coils. The moments invariant algorithm proposed by Hu is used to make it easy to recognize even when the position of the center are different from the trained data. The position error compensation algorithm of six degrees of freedom industrial robot manipulator is also developed and the data of the position of the center rolling-coils, which is obtained by floor mount camera, are transferred by asynchronous communication method. Therefore, even if the position of center is changed, robot moves to the position of center and performs the labeling work successfully. Therefore, this system can be improved the safety and efficiency.

• Journal of Korea Multimedia Society
• /
• v.4 no.4
• /
• pp.234-332
• /
• 2001

For a method improving fractal image segmentation which is a new application of fractal image coding, YST scheme have proposed an image segmentation scheme using labeling based on periodic points of pixel transformation and error-correction of labels by iterating fractal transformation. The scheme generates the high quality segmentation, however, it has the redundancy in the process of labeling and correction of labels. To solve this problem, we propose a labeling algorithm based on orbit of pixel transformation and restricted condition on iterating process of fractal transformation.

• Korean Journal of Radiology
• /
• v.22 no.7
• /
• pp.1194-1202
• /
• 2021

Objective: To investigate the age-dependent changes in regional cerebral blood flow (CBF) in healthy adults by fitting mathematical models to imaging data. Materials and Methods: In this prospective study, 90 healthy adults underwent pseudo-continuous arterial spin labeling imaging of the brain. Regional CBF values were extracted from the arterial spin labeling images of each subject. Multivariable regression with the Akaike information criterion, link test, and F test (Ramsey's regression equation specification error test) was performed for 7 models in every brain region to determine the best mathematical model for fitting the relationship between CBF and age. Results: Of all 87 brain regions, 68 brain regions were best fitted by cubic models, 9 brain regions were best fitted by quadratic models, and 10 brain regions were best fitted by linear models. In most brain regions (global gray matter and the other 65 brain regions), CBF decreased nonlinearly with aging, and the rate of CBF reduction decreased with aging, gradually approaching 0 after approximately 60. CBF in some regions of the frontal, parietal, and occipital lobes increased nonlinearly with aging before age 30, approximately, and decreased nonlinearly with aging for the rest of life. Conclusion: In adults, the age-related perfusion patterns in most brain regions were best fitted by the cubic models, and age-dependent CBF changes were nonlinear.

• Journal of Industrial Convergence
• /
• v.22 no.1
• /
• pp.177-183
• /
• 2024

The study investigates the impact of data quality on the performance of artificial intelligence (AI). To this end, the impact of labeling error levels on the performance of artificial intelligence was compared and analyzed through simulation, taking into account the similarity of data features and the imbalance of class composition. As a result, data with high similarity between characteristic variables were found to be more sensitive to labeling accuracy than data with low similarity between characteristic variables. It was observed that artificial intelligence accuracy tended to decrease rapidly as class imbalance increased. This will serve as the fundamental data for evaluating the quality criteria and conducting related research on artificial intelligence learning data.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1266-1268
• /
• 1996

In this study an automatic roiling-coli labeling system using robot vision system and peripheral mechanism is proposed and implemented, which instead of the manual labor to attach labels Rolling-coils in a steel miil. The binary image process for the image processing is performed with the threshold, and the contour line is converted to the binary gradient which detects the discontinuous variation of brightness of rolling-coils. The moment invariants algorithm proposed by Hu is used to make it easy to recognize even when the position of the center are different from the trained data. The position error compensation algorithm of six degrees of freedom industrial robot manipulator is also developed and the data of the position of the center rolling-coils, which is obtained by floor mount camera, are transfered by asynchronous communication method. Therefore even if the position of center is changed, robot moves to the position of center and performs the labeling work successfully. Therefore, this system can be improved the safety and efficiency.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.3 no.3
• /
• pp.151-157
• /
• 2008

In this paper, we propose a three dimensional distance measurement method for a stereo system by using web cams. Using a parallel stereo system, a robot gets two images from each webcam and equalize brightness of both images. And we suggest an image processing method such as labeling, isolating an object from background and finding center of an object. We also propose a method of calculating the focal distance by using least square algorithm based on triangulation and we can reduce calculation error by this method. From experimental results, we show that the proposed method can be effective for 3D distance measurement.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.6
• /
• pp.90-100
• /
• 2017

The purpose of this study is to detect and label the vehicles using the drone images as a way to overcome the limitation of the existing point and section detection system and vehicle gap estimation on Arterial road. In order to select the appropriate time zone, position, and altitude for the acquisition of the drone image data, the final image data was acquired by shooting under various conditions. The vehicle was detected by applying mixed Gaussian, image binarization and morphology among various image analysis techniques, and the vehicle was labeled by applying Kalman filter. As a result of the labeling rate analysis, it was confirmed that the vehicle labeling rate is 65% by detecting 185 out of 285 vehicles. The gap was calculated by pixel unitization, and the results were verified through comparison and analysis with Daum maps. As a result, the gap error was less than 5m and the mean error was 1.67m with the preceding vehicle and 1.1m with the following vehicle. The gaps estimated in this study can be used as the density of the urban roads and the criteria for judging the service level.