• Journal of Animal Reproduction and Biotechnology
• /
• v.38 no.3
• /
• pp.121-130
• /
• 2023

Background: Coating a culture plate with molecules that aid in cell adhesion is a technique widely used to produce animal cell cultures. Extracellular matrix (ECM) is known for its efficiency in promoting adhesion, survival, and proliferation of adherent cells. Gelatin, a cost-effective type of ECM, is widely used in animal cell cultures including feeder-free embryonic stem (ES) cells. However, the optimal concentration of gelatin is a point of debate among researchers, with no studies having established the optimal gelatin concentration. Methods: In this study, we coated plastic plates with gelatin in a concentration-dependent manner and assessed Young's modulus using atomic force microscopy (AFM) to investigate the microstructure of the surface of each plastic plate. The adhesion, proliferation, and differentiation of the ESCs were compared and analyzed revealing differences in surface microstructure dependent on coating concentration. Results: According to AFM analysis, there was a clear difference in the microstructure of the surface according to the presence or absence of the gelatin coating, and it was confirmed that there was no difference at a concentration of 0.5% or more. ES cell also confirmed the difference in cell adhesion, proliferation, and differentiation according to the presence or absence of gelatin coating, and also it showed no difference over the concentration of 0.5%. Conclusions: The optimum gelatin-coating for the maintenance and differentiation of ES cells is 0.5%, and the gelatin concentration-mediated microenvironment and ES cell signaling are closely correlated.

• Journal of Environmental Science International
• /
• v.22 no.3
• /
• pp.347-358
• /
• 2013

The aerosol number concentration have measured with an aerodynamic particle sizer spectrometer(APS) at Gosan in Jeju Island, which is known as background area in Korea, from March 2010 to February 2011. The obtained results of asian dust events and non-asian dust period have been compared. The results show that the entire averaged aerosol number concentration from APS measurement during asian dust events and non-asian dust period are about 341 particles/$cm^3$ and 240 particles/$cm^3$, respectively. During asian dust events, the number concentration in small size ranges(${\leq}0.4{\mu}m$) are similar to non-asian dust period, however, those in large size ranges(${\geq}0.7{\mu}m$) are very higher than non-asian dust period. The contributions of the size resolved number concentration(23 channel in $0.25{\sim}10.0{\mu}m$) to total number concentration in that range are dramatically decreased with increased particle size. The contributions of smaller size ranges(${\leq}0.4{\mu}m$) during asian dust events are very low compared with non-asian dust period, on the other hand, those of larger size ranges(${\geq}0.4{\mu}m$) are higher than non-asian dust period. The number concentration in each size range are strongly correlated with the concentration in adjacent size range. And the total aerosol number concentration are depended on the number concentration in range of smaller than $0.58{\mu}m$ during non-asian dust period and asian dust events. On the other hand, $PM_{10}$ mass concentration has mainly affected with the number concentration in range of smaller than $1.0{\mu}m$ during non-asian dust period, however, during asian dust events, the mass concentration has mainly affected with the number concentration in range of $0.65{\sim}3.0{\mu}m$.

• Membrane and Water Treatment
• /
• v.7 no.2
• /
• pp.127-141
• /
• 2016

Electrodialysis (ED) is known to be a useful membrane process for desalination, concentration, separation, and purification in many fields. In this process, it is desirable to work at high current density in order to achieve fast desalination with the lowest possible effective membrane area. In practice, however, operating currents are restricted by the occurrence of concentration polarization phenomena. Many studies showed the occurrence of a limiting current density (LCD). The limiting current density in the electrodialysis process is an important parameter which determines the electrical resistance and the current utilization. Therefore, its reliable determination is required for designing an efficient electrodialysis plant. The purpose of this study is the development of a predictive model of the limiting current density in an electrodialysis process using response surface methodology (RSM). A two-factor central composite design (CCD) of RSM was used to analyze the effect of operation conditions (the initial salt concentration (C) and the linear flow velocity of solution to be treated (u)) on the limiting current density and to establish a regression model. All experiments were carried out on synthetic brackish water solutions using a laboratory scale electrodialysis cell. The limiting current density for each experiment was determined using the Cowan-Brown method. A suitable regression model for predicting LCD within the ranges of variables used was developed based on experimental results. The proposed mathematical quadratic model was simple. Its quality was evaluated by regression analysis and by the Analysis Of Variance, popularly known as the ANOVA.

• Korean Journal of Biological Psychiatry
• /
• v.11 no.1
• /
• pp.33-39
• /
• 2004

Objective:Nitric oxide(NO) has been known to be associated with tolerance and preference to alcohol. It has also been known to affect various alcohol drinking behavior, alcohol withdrawal symptoms and alcohol- induced brain damage. The purpose of this study was to determine the difference, among alcohol dependence group, alcohol drinking group and abstinence group, in serum concentration of nitrite, a stable metabolite of NO, and it's relationship to clinical and biochemical markers of alcoholism. Methods:Forty subjects diagnosed as alcohol dependence according to DSM-IV diagnostic criteria were evaluated for the clinical characteristics and biochemical markers of alcohol dependence including nitrite with their CIWA-Ar scores checked just after admission. Thirty-nine healthy controls were also evaluated, divided into twenty-three alcohol drinking group and sixteen abstinence group. Clinical characteristics were evaluated by CIWA-Ar, CAGE and AUDIT questionnaires. Aspartate aminotransferase(AST), alanine aminotransferase (ALT), gamma glutamyltransferase(GGT) and mean corpuscular volume(MCV) were used as the biochemical markers of alcohol dependence. Serum nitrite concentrations were measured by Griess reaction. Results:1) The concentrations of nitrite in alcohol dependence patients were not different from those in the control subjects. 2) There were no significant association between the nitrite concentrations and the CIWA-Ar scores in alcohol dependence patients. 3) Nitrites are significantly increased in alcohol dependence group and alcohol drinking group compared with abstinence group. Conclusions:These findings suggest that serum nitrite concentration has no relation with alcohol withdrawal symptoms, but alcohol drinking increases serum nitrite concentration influenced by general condition of the body.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.12
• /
• pp.1173-1177
• /
• 2015

This paper deals with estimating the acid concentration of pickling process using the Volterra inputs. To estimate the acid concentration, the whole pickling process is represented by the grey box model consists of the white box dealing with known system and the black box dealing with unknown system. Because there is a possibility of nonlinear term in the unknown system, the Volterra series are used to estimate the acid concentration. For the white box modeling, the acid tank solution level and concentration equations are used, and for the black box modeling, the acid concentration is estimated using the Volterra Least Mean Squares (LMS) algorithm and Least Squares (LS) algorithm. The LMS algorithm has the advantage of the simple structure and the low computation, and the LS algorithm has the advantage of lowest error. The simulation results compared to the measured data are included.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.6
• /
• pp.757-766
• /
• 2012

In this study, we have examined concentration distribution and patterns of PCBs in waters, sediments and soils in an agricultural area of South Korea to investigate the relationship between PCBs sources and concentration levels. The concentration of PCBs in water samples were ranged from lower values below detection limit to 8.25 ug/L and the concentration of PCBs in sediment samples were ranged from lower values below detection limit to 76.67 ug/Kg. The concentration of PCBs in soil samples were ranged from lower values below detection limit to 23.51 ug/Kg. These contamination levels were far below the guideline values suggested for environmental quality assessment. The homologue patterns in samples varied from sample to sample, but isomer patterns were very similar with each other. PCB-138 and PCB-153 were predominant congeners in the soil and sediment, which were similar to the results obtained from previous studies. With these results, the assessment of potential sources of PCBs contamination in the sediments of the Nakdong river basin was performed. The principal components were extracted by Principal Component Analysis(PCA). As the result of PCA, it could be expected that PCBs in samples of this study were more affected by PCB products than combustion processes and mostly affected by already-known sources. The PCBs in the soil and sediment samples were related with commercial PCB products.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.446-449
• /
• 2006

It is backscattering of solar radiation by water body that makes ocean color observable from above, either by airplanes or satellites. Given the very low direct contribution to backscattering by phytoplankton cells, it is curious why the retrieval of phytoplankton concentration from remotely observed ocean color is evidently successful. From semianalytical bio-optical models, a dataset is created of spectral absorption, scattering and backscattering coefficients as a function of chlorophyll concentration. Four scenarios are considered, 1) only molecular and no particle scattering, 2) random particle backscattering uncorrelated with chlorophyll concentration, 3) constrained random particle scattering with known backscattering ratio, and 4) constrained random scattering with random backscattering ratio. Scenario 1 only introduces moderate errors of -20% - 90%. And for scenarios 3 and 4, the errors are largely within 30% and 100%. Scenario 2 introduces the largest errors, with the retrieved chlorophyll concentration virtually uncorrelated with the true values, implying the backscattering must somehow be related to the trophic state. The results of the study suggested These 3 cases confirmed that while it is the absorption by phytoplankton that in large part decides the accuracy of chlorophyll concentration retrieval, for the success of monitoring of global ocean primary productivity we have to improve our knowledge on particle backscattering.

• Journal of Environmental Health Sciences
• /
• v.19 no.2
• /
• pp.1-9
• /
• 1993

In public water supply systems, Alum and/or PAC being used as a coagulant. It is well known that their use increased frequently the concentration of residual aluminum in filtered water upon operating conditions. This study was conducted to find the optimum conditions that both the concentration of residual aluminum and turbidity are minimized by changing such factors as pH, temperature, alum dosage, mixing rate, alkalinity and hardness. The results can be summarized as follows: The pH values for the minimum concentration of residual aluminum and turbidity as a given experimental condition were found at pH 6 and pH 7 respectively, the apparent clarity was best at pH 8. The floc settling rate was the greatest at pH 6.5, but the turbidity was high at the same condition. The more alum dosage, the higher the concentration of residual aluminum. However the alum dosage less than 15 mg/l tend to decrease in turbidity. Restabilization and enmeshment occurred near 15 mg/l and 20 mg/l of alum dose respectively. With the increase of mixing rate (rapid and slow), the concentration of residual aluminum and turbidity are increased and the same trend was found in increment of mixing time. At low water temperature, the concentration of residual aluminum was decreased, but turbidity was increased. It was confirmed that alkalinity had an effect on the coagulation efficiency, but hardness did not.

• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.1079-1087
• /
• 1995

The quality of human life is directly related to the quality of the environment. To assess environmental quality we must first determine the MCLG(Maximum Contaminant Level Goal), MCL(Maximum Contaminant Level), environmental impact and so on. The MCLG is the concentration at which no known adverse health effects occur. The MCLG is determined by risk assessment identifying which process is hazardous assessing, dose-response, human exposure, and characteristics of risk. With consideration of analytical methods, treatment technology, cost and regulatory impact, the MCL is set as close to the MCLG as possible. In this way, determination of the concentration and national distribution of contaminants is important for assessment of environmental quality The analytical sciences pose potential problems in assessing environmental quality. Continuing improvement in the performance of analytical instruments and operating technique has been lowering the limits of detectability. Contaminant concentration below the detection limit has usually been reported as ND(Not-Detected) and this has often been misunderstood as equivalent to zero. Because of this, more the contaminant concentration in the past was below the detection limit, whereas contaminants can be quantified now even though the contaminant concentration might remain the same or may even have decreased. In addition, environmental sampling has various components due to heterogeneous matrices. These samples are used to overestimate the concentration of the contaminant due to large variability, resulting in excess readings for MCL. In this paper, the significance of the analytical sciences is emphasized in both a conceptual and a technical approach to environmental assessment.

• The Research Journal of the Costume Culture
• /
• v.10 no.4
• /
• pp.433-440
• /
• 2002

Natural gardenia and Japanese pagoda tree have been known as them of the most widely used yellow vegetable dyes. Cotton and silk fabrics(KS K 0905) were chosen as specimens. Those were dyed with natural gardenia and Japanese pagoda tree. The conditions of dyeing were varied according to the kinds of mordants, using mordants or not and the concentrations of the natural dyes. Sn, Al, Fe and Cu were chosen for the mordants. 5%(owf), 10%(owf), 15%(owf) and 20%(owf) were used as for the concentration of the natural dyes. The color differences were measured by the Spectrometer(UV-VIS-NIR) before and after dyeing. The results are as follows: 1. Deeper colors were proportionately shown up to the concentration of the natural dye. 2. Silk was shown the higher dye affinity than the cotton at the same concentration of the dye. 3. The color difference between the Sn-mordanted specimens and the Al-mordanted specimens were significant. When the concentration of the dye increased, the colors got darker, specially in b* value. 4. The color difference between the Fe-mordanted specimens and the Cu-mordanted specimens were significant in L* value and b* value. 5. The deeper or lighter yellow were controllable under the concentration of the natural dye and the mordants. 6. The most effective and the economic concentration of the natural dye was 10% owf through the experiments.