• 복식문화연구
• /
• 제21권4호
• /
• pp.494-510
• /
• 2013

The purpose of this study was to develop unique men's pullovers using the patterns of Baekje tile, brick, and gilt-bronze shoes. As the method of the study, it was reviewed of the literature about Baekje traditional patterns and the knitting techniques. The development of pullover design was used TexPro design CAD program. The manufacture of pullover were knitted by Shima Seiki computerized knitting machines and Brother manual knitting machines. The results of study were as follows. First, the patterns of Baekje tile, brick and gilt-bronze shoes were suited to develop as motif for men's pullover. Second, men's pullover using Baekje traditional patterns were able to maintain the identity of Korean traditional culture and express the originality of design. Third, pullover was chosen three styles and was developed four design. Each pullover design was applied four colorway. Forth, pullover products were made by wool 100% yarn or cotton 47%/acrylic 53% mixed yarn. The patterns were expressed by knitting techniques of floating jacquard and birds-eye jacquard. Luxurious knit fashions were produced. Consequently, through the men's pullover development utilizing Baekje traditional patterns was showed the superiority of the local traditional culture, which is further emphasized by the current globalization. It also confirmed the possibility of the development of high value-added knitted fashion products to meet the needs of modern people to pursue individuality.

• 한국의류학회지
• /
• 제34권5호
• /
• pp.844-855
• /
• 2010

An important issue for the improvement of product quality is to identify and understand the customer-required attributes of a product. This paper identifies and analyzes customer-required attributes of formal knitwear for middle age and elderly women through the use of the Kano model in order to develop competitive products. Various research methods were used in this study. Customer voices for formal knitwear were collected by means of brainstorming and in-depth interviews. The collected customer voices were transformed into customer-required attributes with the use of an affinity diagram. In addition, the data was collected by means of a questionnaire and was statistically analyzed to examine the dimensions of customer-required attributes on the basis of the Kano model. The results are as follows. Five categories of customer-required attributes were identified (symbolism, aesthetic, fitness, usefulness, and maintenance). The analysis based on the Kano model identifies a strong one-dimensional quality in all of the categories of customer-required attributes and the attractive quality that includes a one-dimensional quality in the categories of fitness and usefulness. The findings of this study demonstrate the applicability of the affinity diagram for apparel that educates formal knitwear developers of the customer-required attributes that they should strategically focus on in order to develop competitive products.

• 한국의류학회지
• /
• 제34권9호
• /
• pp.1546-1557
• /
• 2010

This study analyzes the status of foreign direct investment in Korean textiles and fashion firms and investigates the factors determining their performance. A total of 1,251 cases (including 1,116 manufacturers and 135 of distributors from the 2009/2010 Korean Overseas Business Directory published by KOTRA) were used. The results of this study are as follow: 1) In the case of manufacturers, China was the most heavily invested in country, and the Asian region that included China, Vietnam, Indonesia and Bangladesh consisted of 80% total investment. In cases of distributors, China was also the first ranking country and other countries, that included Vietnam, United States, and Japan are major ones. 2) In terms of the foreign entry mode, wholly-owned subsidiaries represented 90% of total cases. As the index of the degree of localization, the ratio of local employees was very high. 3) Different countries were utilized by year, type of business, and area of process. In manufacturers, Indonesia, China, and Vietnam were the most heavily utilized countries in the 1980s, 1990s, and 2000s, respectively. For distributors, China was the major market ill the 1980s and 1990s but Vietnam has emerged as the biggest market in the 2000s. In terms of area of process, China was for manufacturing fibers and fabrics, Vietnam was for most items, Indonesia was for assembly, knit, accessories, and Bangladesh was for embroidery and accessories. 4) The determining factors of the age of foreign business as the proxy index and performance of foreign business entry, were different by the type of business. For manufacturers, four factors including the dollar amount of investment, number of local employees, the mode of foreign direct investment, and entry to China were significant. On the other hand, only two factors including the dollar amount of investment and entry (other than China) were significant distributors.

• 한국염색가공학회지
• /
• 제27권3호
• /
• pp.175-183
• /
• 2015

Weight loss treatment of a fiber leads an improvement of its handle and drape properties. Hydrolysis of a fiber is commonly known as a method to reduce its weight of 5-40%. Most of the studies on the weight loss treatment are mainly based on polyester fibers and there has been almost no study on the weight reduction of nylon fibers. In this study, however, in order to develop a use of nylon 6 fiber for the industrial applications such as toothbrush, underwear, carpet and more, weight loss treatment of a nylon 6 fiber was carried out. Under various treatment conditions, morphological analysis were done to observe the change in the structure of the surface and analysis. From the observation of formic acid treated nylon 6 fiber, there were many etched and deformed morphologies. Thermal and crystalline properties were analyzed to find the changes in the crystal structure caused by the weight loss treatment. There were little differences in the crystalline properties of nylon 6 fiber by formic acid treatment. Tensile strength of nylon 6 fiber decreases with acid concentration. The FITR peak intensity of the amide bond decreases with formic acid concentration.

• 한국염색가공학회지
• /
• 제22권3호
• /
• pp.282-291
• /
• 2010

Digital textile printing(DTP) is becoming more important because the production trend of textile printing goods is adapting to small-lot multiple items. Recently enhanced use of DTP is closely connected with production of high value-added products in fashion industry, which is also appropriate for quick response system(QRS). Quality of DTP depends on pre-treatment, after-treatment, ink, media, printer, etc. One of these parameters, Selection of good media is very important to obtain high quality of DTP products. Especially, the effects of media on printing quality of DTP according to yarn twist and structure of knitting fabric were examined in this study. Two types of yarn twist of 830 t.p.m and 1630 t.p.m for cotton knit were used and five types of media structures were knitted with single circular knitting machine. First, MIU, MMD, SMD's values are closely related with surface roughness of sample as well as printing quality. The hard twist samples were higher values than normal twist samples in the same media structure. In case of SMD, the values increased from plain to corduroy types. Second, aspect of line sharpness, line area, and line width values of hard twist samples decreased from plain to corduroy than those of normal twist samples. Third, line deviation values of hard twist samples, blurriness of line, also decreased than those of normal twist samples.

• 한국의상디자인학회지
• /
• 제11권1호
• /
• pp.43-51
• /
• 2009

The cotton, wool, cotton/wool blended(80:20) and tencel fabrics were treated with low temperature oxygen or argon plasma, enzymes(cellulase or protease), or oxygen plasma-enzyme and examined for their weight loss and conditions for treatment for the environment friendly finishing. In the plasma treatment argon gas had better effect on the weight loss than oxygen gas did and the weight loss of all the fabrics was increased as increasing discharge power and discharge time. The weight loss of cotton, wool, cotton/wool blended(80:20) fabrics decreased in a large measure after 1 hr but that of tencel didn't decrease after 1 hr. In case of cellulose fibers oxygen gas plasma induced chemical functional groups on the surface of substrate more than argon gas plasma did so the weight loss of wool was larger than that of cotton, tencel fabrics in oxygen plasma-enzyme treatment. The weight loss of cotton and tencel fabrics decreased the initial stage because oxygen plasma pre-treatment caused cross linking as well as etching effect but argon plasma pre-treatment didn't. The plasma pre-treatment cleared the way for enzyme treatment on the whole but oxygen plasma pre-treatment bear in hand the increase of weight loss more or less because of the cross linking on the surface of cellulose fibers. The appropriate conditions for plasma treatment was 10-1Torr, 40W for 30minutes and for cellulase treatment were enzyme concentration of $3g/{\ell}$, pH 5, $60^{\circ}C$ for 1hr and for protease treatment were enzyme concentration of $4g/{\ell}$ pH 8, $60^{\circ}C$ for 1hr.

• 한국의상디자인학회지
• /
• 제12권4호
• /
• pp.61-73
• /
• 2010

The purpose of this study is to create unique formative beauty with free expressive method and to suggest accessory design with individuality through this, by using hand-knitting technique in design of necklace and bangle, which belong to personal ornament among fashion accessories. It analyzed on theoretical background of knit technique and accessory through documentary research, examined the accessory design tendency and the research tendency through collection materials, and then suggested 9 works in accessory ornament design of using hand-knitting technique, based on this. The results are as follows. First, even in overseas collection, accessories in diverse materials and shapes were being show cased. Volume in necklace or bangle was indicated to be big. There were many cases of covering several items together. Second, the hand-knitting technique in originative accessory design could be confirmed to be possibly used broadly in the range of pattern and shape available for making by using yarn in diverse thicknesses with proper technique, and by transforming basic tissue according to knitting technique. Third, through the results of making ornaments in 7 necklaces and 2 bangles, the hand-knitting technique was confirmed to possibly expanding the application range of knitting technique in the accessory field, and has significance in having suggested individual accessory.

• 한국의상디자인학회지
• /
• 제12권4호
• /
• pp.197-206
• /
• 2010

The purpose of this study is to dye hanji/cotton fabrics using persimmon juice and to investigate the change in the hand fabrics. Using the Kawabata Evaluation System, we have examined the changes in the physical properties, primary hand value and total hand value. The dynamic characteristics of hanji/cotton fabrics have been explored by tensile, shear, bending, compression, surface properties, thickness and weight. As a result, it can be seen that the linearity of load-extension and tensile resilience are increased with the increase of the concentration and dyeing times of persimmon juice and tensile energy is decreased in the same condition. These behaviors are shown in the compression properties. Although the mechanism of persimmon juice dyeing has been widely discussed, it means that the fabrics dyed with persimmon juice become stiffened and the elasticity is increased with the introduction of persimmon on the fabrics studied. Bending rigidity and hysteresis of the bending moment are increased with the increase of the concentration and dyeing times of persimmon juice. Also, Geometrical roughness, expressed in SMD is increased with increasing the concentration and dyeing times of persimmon juice, compared with as-received. It indicates that these results are due to the geometric structure of hanji yarn and the introduction of persimmon juice on the fabrics studied. The fullness and softness with the soft feeing are increased a little due to the tannin component of persimmon juice introduced on the fiber surface.

• 한국의상디자인학회지
• /
• 제21권4호
• /
• pp.69-79
• /
• 2019

This study aims to seek knitting methods that can enhance the neck design of seamless knitwear and to find out how to improve the designs by comparing and analyzing the characteristics of the knitting methods used for v-neck pullovers. The investigator analyzed the characteristics of the knitting methods and assessed the wearing sensation by using six different pieces of clothing for the experiment. The results were analyzed based on a variance analysis (ANOVA). Among the items showing significant results, the Duncan-test was used for more intensive research. As a result, while using the basic pattern of knitting methods, Experiment Clothes A ended up binding on the back neckline, and not making the hem of back. Also, the neck was the widest. In the case of the special neck, Experimental Clothes B (1:1), which had the least number of the knitting course in relation to the knitting ratio, the bottom part of the back body had the most wrinkles. According to the result of wearing sensation, the front part, the side part, and the back part showed similar results (p<0.000) in all items. Specifically, the appearance of the Experiment Clothes A (normal) in both the front and rear aspects were evaluated as the best. In the case of the special neck, the Experimental Clothes F was ranked the highest, whereas the Experimental Clothes B (1:1) was ranked the lowest. Based on the results of the study, it seems possible to provide concrete and technical data for the planning of unique and productive designs. With regard to seamless knitwear neck designs, a comparative analysis of the knitting method of v-neck pullovers will be of practical use in the development and manufacturing of the product.

• 패션비즈니스
• /
• 제19권4호
• /
• pp.183-199
• /
• 2015

This study aimed to systematize the apparel vendor work processes and provide useful information to future employees of clothing export units by analyzing the processes of vendors' manufacturing tasks. A survey of 20 apparel vendors servicing mainly U.S. buyers was conducted on employees of overseas business departments working for more than five years. buyers. Based on the results, vendors mainly manufactured cut-and-sew knit products. Regarding the production method, OEM was used more frequently than ODM. Fourteen (70%) companies used the ODM method. This suggests that vendors are expanding their production method from OEM to ODM. In order to summarize the work of each business based on the clothing production process research results, buyers were in charge of planning products and the vendors were in charge of sampling. Production of materials and the approval of material tests were out sourced. Overseas factories of vendors were in charge of bulk (mass) production and garment finishing, as well as packaging and shipping the completed products. Even though the vendors' head offices do not directly produce clothes, they play a pivotal role in ensuring planning and management progress in clothing production. As buyers prefer direct contracts for cost reduction, the vendor additionally performs the role of an agent. Also, with the increase in ODM production ratio, the work area of the vendor is expanding. If Korean clothing exporters improve their global competitiveness by investing in the R&D of materials and design to enhance the ODM method, the development of Korea's clothing and export industry will benefit significantly.