• 한국염색가공학회지
• /
• 제22권1호
• /
• pp.61-70
• /
• 2010

This effects of drawing conditions on the physical properties of the drawn worsted yarns were investigated. The drawn worsted yarns were made on the yarn drawing system with various drawing conditions such as concentration of reducing agent, draw ratio, setting time of drawn yarn and concentration of oxidizing agent. The dry and wet shrinkage, irregularity(CV%), thin and thick part, hairiness and abrasion resistance of these various specimens were measured and discussed in terms of various drawing conditions.

• 한국의류산업학회지
• /
• 제12권4호
• /
• pp.494-499
• /
• 2010

Knitted fabrics are very popular for their numerous advantages such as greater comfort, attractive garment appearance, better fit on the body, etc. In this study, we investigated the mechanical properties and abrasion property of warp knitted fabrics for footwear which treated with several softeners to improve abrasion resistance. The antistatic softener among the various softeners showed high improvement in abrasion resistance. Among the mechanical properties with treating conditions, WT (tensile energy), G (shear stiffness), B (bending rigidity) increased as treating timeincreased. But the other mechanical properties were little changed with treating concentration.

• 한국의류학회지
• /
• 제23권5호
• /
• pp.737-744
• /
• 1999

Underwear made of plain and 1$\times$1 rib-knit cotton fabric were laundered to evaluate the change of the size and the tensile properties. For laundering pulsator and drum washers were used. After 30 washing cycles the amount of shrinkage and the extension were different with washer types. Underwear laundered by the drum type was shrunken in the neck line armhole line and hem line were extended and the bodice width and side length were shrunken,. Tensile strength of the knitted fabric was not decreased through repeated washings because the fabric density was increased. But it was confirmed by SEM that the surface of the fiber was damaged by washings.

• 한국염색가공학회지
• /
• 제32권3호
• /
• pp.128-134
• /
• 2020

Heat and flame protecting cloth is usually made of meta aramid fiber because of its own properties. But the high inter molecular hydrogen bonding and high Tg is the reason of the difficulty to dye meta aramid fiber. Recently, it was commercialized that the easily dyeable meta aramid fiber(AMD) for improving dyeability. In this study, the dyeing properties of AMD dyed with cationic dyes were investigated. The K/S values of AMD were 5~10% higher than these of general meta aramid fiber(AM) in the case of 1%owf caused by the lower crystallinity of AMD. The difference between K/S values of AMD and AM was increased as increasing dyeing concentration. The washing and rubbing fastness grade of AM and AMD were similar and good to very good.

• 한국염색가공학회지
• /
• 제35권1호
• /
• pp.1-7
• /
• 2023

In this study, the influence of pre-treatment(bleaching, mercerization by liquid ammonia and caustic soda) on cotton fabrics were investigated on dyeing Rubia cordifolia extracts. Aluminium Sulfate, Iron(Ⅱ) Sulfate Heptahydrate, Copper(Ⅱ) Sulfate Pentahydrate, Tin(Ⅱ) Sulfate, Manganese(Ⅱ) Chloride Tetrahydrate were used as mordanting agents. K/S value and washing fastnesses of the dyed cotton fabrics pretreated under different conditions were investigated. The K/S values were increased in the order of bleaching, liquid ammonia and mercerization pre-treatment. It was found that the pre-treatment conditions did not significantly affect the color change. The colorfastness to washing of most of all dyed fabrics were over grade 4 regardless of pre-treatment condition.

• 감성과학
• /
• 제20권2호
• /
• pp.117-126
• /
• 2017

본 연구에서는 직/편물 8종을 대상으로 이들 수직방향과 수평방향 수분이동특성 측정방법에 따른 소재들의 수분이동 특성을 분석하였다. 또한, 8종의 시편의 MMT에 의한 건조특성을 수직 건조 측정 결과와 비교하여 논의하였다. 수평수분이동 방법인 MMT 시험 결과는 수직법인 바이렉 방법의 결과와 유사한 거동을 나타내었다. 대나무, 린넨 및 면/나일론 복합 소재는 드롭법의 흡수시간은 짧았으며, 표면의 낮은 접촉각 및 직물의 높은 다공성에 기인한 것으로 판단되며, 친수성 스테이플 섬유의 구조와 상관이 있을 것으로 보인다. MMT에 의한 건조특성은 니트 및 대나무 직물의 최대 흡수반경이 가장 우수했으며, 수식 건조법에 비해 차이를 나타내었다. MMT 방법의 건조속도는 직물의 두께와 포화수분 흡수율과 높은 상관성을 가졌으며, 회귀계수는 각각 0.9와 0.88이었다. 이는 직물의 두께가 얇을수록 위킹 및 건조특성이 우수하며, 기능성 소재기획시 착용 내구성을 판단하는데 중요함을 의미한다. 또한 상이한 섬유소재, 실 및 구조의 소재에 대한 수분이동특성(위킹, 건조)는 측정 방법에 따라 다른 결과를 나타내었다.

• 패션비즈니스
• /
• 제2권2호
• /
• pp.85-96
• /
• 1998

This is a study on the revitalization of the fashion design studios (planning and production companies of clothing) in compliance with the request from the Small and Medium Business Administration. It's purpose is to strengthen the competence of the petty company and eventually frourish the Korean Fashion Business. The research method to conduct this study consists of two parts. First part is the research on the domestic industry mainly by questionaire, interviews and literature reviews. After making out the directory of the design studios (total of 700), 85 studios were selected for the questionaire. And by interviewing them, data with more depth was obtained. The second part is the research of the foreign cases. In the case of Japan, survey was done on the spot. However, in the case of Italy, literature review and interview with specialists were made. Also in order to higher the efficiency of the study an advisory committee and final explanatory meeting was carried into effect. This study has started first by looking into the significance and function of the fashion design studios. Then, a full scale examination was made centering around the questionarie of the present conditions of the companies. General conditions were first observed. Then the survey was done by grouping the industry by the industrial classifications such as woven, knit, leather mustang fur and fashion accesaries. The problems these companies face are that they are petty in scale and in lack of speciality, professional training, government support. Also, they are without an association or an organization that speaks for them and they face problems while doing business with others. Cases of Japan and Italy were surveyed as the example of the advanced nations. In the case of Japan, development of planning and management company, Fashion Soft House, was analyzed. Italy for instance, the function of the studios was looked into centering around the silk complex, Como, knit product complex, Capri. Also, precedent cases of brands and developing factor of the fashion industry was examined. Finally, on the basis of the result of the study, a plan to revitalize the fashion design studios was presented centering around the strategic planning, management, production, developing of talent, improvement of relationship between business acqaintance, and the support policy of the government.

• 한국의상디자인학회지
• /
• 제4권2호
• /
• pp.139-161
• /
• 2002

This study investigates the characteristics of Nordic sweaters works from a historical perspective. Specifically, this study deals with the following research topics: 1) development of Nordic sweaters, 2) the characteristics of Nordic sweaters industry according to the change of times, 3) the comparison of local knitting patterns, 4) the symbolic meaning of the designs in the Nordic sweaters and patterns. The results of the study are summarized as follows. 1. Knitted work developed mostly in Northern Europe, a cold area, and the barren, mountainous coastal areas where people frequently used woolen materials for clothes. It was also developed in Scandinavian regions which lead the fashion in modern days. Scandinavian knitting techniques have been diffused into the east coast of England and Northern Europe by Vikings. 2. Scandinavian countries are distinguished from other countries by their conservative but creative cultural tradition. Their knitting patterns are characterized by small geometric figures such as dots, triangles, squares, rhombuses, and crosses used often with stars and roses. Scandinavian knitting is also salient for its vertical stripes and simple motifs repeating at short intervals. 1) Norway ; Simple and geometric Norwegian patterns are classified into three groups of motifs: (a) the motifs of cross, diamond, X, and swastika (equation omitted). (b) the motifs of human figures, animals and birds, (c) floral motifs (especially eight-petal roses). Their use of color is also simple, and is limited to more than two colors. (2) Sweden ; Swedish patterns are colorful and geometric. They are characterized by features such as brocade, complex embroidery, and contrast of red and black colors. They also show Guernsey patterns. Initials and production years were knitted in sweaters which have different patterns in their trunks and sleeves. 3) Denmark ; The Danish pattern is the purl stitch knitted against the stockinette stitch. The technique is used to copy woven damask motifs. The patterns are seen most clearly when they are knit with smooth yarn. The Faeroe sweaters are the representative work of Danish knitting. Faeroe knitting, incorporates stranded pattern and is knit in the round, either with circular needles. 4) Finland ; Finnish patterns are similar to Norwegian patterns. Finnish knitted work show very colorful, variety and free-flowing geometric patterns. 5) Iceland ; Icelandic knitting shows original ribbon pattern. Lope sweater is the representative work. 3. The traditional knitting patterns not only carried symbolic meanings but also served as means of communication. First of all, patterns had incantatory meanings. Patterns were symbolic of one's social standing, too. The colors, motifs and their arrangements were very important features symbolizing one's social position or family line. People often communicated by certain pieces of knitted work or patterns. In short, the knitted work in the Nordic sweaters served the function of admiring the beauty of nature and symbolizing various meanings. The unique designs and colors of the knitted work reflected the characteristics of the culture those works belonged to. This study also turns our attention to the issue of how the traditional colors and designs of the knitted work can contribute to the development of modern designs, and by doing so, if makes us realize the importance of knitted works in modern society.

• 한국콘텐츠학회논문지
• /
• 제20권1호
• /
• pp.630-643
• /
• 2020

최근 소비자들은 스스로 원하는 물건을 만드는 소비자이자 생산자로 역할이 바뀌고 있다. 현대의 소비 방식에 따라 의류 생산 방식도 변화의 필요성이 대두되고 있다. 니팅머신도 그 중 하나로, 대량생산 기기였지만 소규모로 어디서나 옷을 제작할 수 있는 기기가 개발되었다. 니트 제작은 다른 의류 디자인보다 고려해야하는 부분이 많아 니트 제작 프로그램의 사용성에 관한 개선이 필요하지만, 아직 일반 대중이 사용하기에는 어려움이 있음을 발견했다. 이에 본 연구에서는 니팅머신을 이용한 의류 제작 사이트의 웹 사용성을 평가할 수 있는 평가항목을 제안하고자한다. 이를 위해 현재 사용되고 있는 니팅머신용 프로그램과 커스터마이징 상품 제작 웹사이트의 사례와 사이트 별 UI를 조사 분석 하였다. 이러한 선행 조사를 바탕으로 평가항목 초안을 도출하고, 초안을 기반으로 3차례의 델파이 조사를 실시하여 항목의 분류, 수정, 삭제의 과정을 거쳐 평가도구를 제작했다. 최종 평가도구 제작 후 각 항목을 8개의 구성요소로 그룹화하여 니팅 커스터마이징 웹사이트만의 특화된 영역을 탐구했다. 그 결과 니트 디자인 과정을 담아낼 수 있는 UI에 관한 항목이 특징적으로 나타났다. 따라서 본 연구를 통해 향후 니팅머신용 커스터마이징 상품제작 웹사이트의 사용성 향상과 이를 통한 니팅머신의 대중화를 기대한다.

• 한국의상디자인학회지
• /
• 제23권1호
• /
• pp.37-45
• /
• 2021

This study observed the release of microplastics according to washing weights and filtering conditions, measured microplastic generation rates, fiber lengths, and fiber diameters. This study attempted to present data for the development of filters that decrease microplastic generation. For test samples, polyester piled knit fabric (cut-pile) was selected, which currently has the highest amount of consumption in the clothing industry, but can easily cause marine pollution because of its low biodegradability. For test equipment, a drum washer was used and microplastics were collected using two filter pore sizes, 5 ㎛ and 20-25 ㎛. Microplastic fibers weights and lengths were measured. The results of the experiment showed the following: 1) The release of microplastics differed according to the fabric weights and washing process; 2) washing fabric weights showed a differences in the collection amount according to the filter pore size (5 ㎛, 20-25 ㎛); 3) observations of differences in the lengths of the microplastics that occur during the washing process by filter pore size were made. Fibers with shorter lengths appeared with filter pore sizes of 5㎛ in comparison to filter pore sizes of 20-25㎛. The results from this study on microplastic generation by fabric during washing, demonstrated the following conclusions that can be used to reduce the release of microplastics. First, the release of microplastics according to fabric weights and washing courses are affected by physical force. Therefore, it is necessary to reduce the amount of physical force due to water flow, increase the fabric weight, or wash the material in low temperatures. Second, in the manufacturing of washing machines, microplastic filtration can be promoted or legislatation supporting microplastic filtration can be introduced.