• 공업화학
• /
• 제9권2호
• /
• pp.278-285
• /
• 1998

배출가스중의 $SO_2$ 제거를 위하여 다양한 금속산화물로 구성된 천연망간광석, 철광석, $CuO/{\gamma}-A1_2O_3$ 등을 흡착제로 사용하여 고정층반응기에서 흡착용량실험을 하였다. 또한 흡착제중 흡착용량이 떨어지는 철광석을 제외한 두 가지 흡착제를 이용하여 유동층반응기에서 유속, 온도, 입자크기 등의 조업조건에 따른 $SO_2$ 흡착실험을 수행하였다. 모든 흡착제에서 온도가 증가할수록 흡착량이 증가하는 화학흡착반응을 보였고 유동층반응기에서 $U_o/U_{mf}$ 및 $U_o-U_{mf}$와 같은 유속조건에 따라 입자 크기에 따른 흡착량의 변화가 다르게 나타났으며 유동층반응기 성능식으로부터 반응속도상수를 얻었다. 이 실험을 통하여 천연망간광석이 유동층반응기에서 $SO_2$ 흡착제로의 사용가능성을 확인할 수 있었다.

• 대기
• /
• 제23권1호
• /
• pp.1-11
• /
• 2013

The angular momentum transport of an idealized axisymmetric vortex in the developing stage was investigated using the Weather Research and Forecast (WRF) model. The balanced axisymmetric vortex was constructed based on an empirical function for tangential wind, and the temperature, geopotential, and surface pressure were obtained from the balanced equation. The numerical simulation was carried out for 6 days on the f-plane with the Sea Surface Temperature (SST) set as constant. The weak vortex at initial time was intensified with time, and reached the strength of tropical cyclone in a couple of days. The Absolute Angular Momentum (AAM) was transported along with the secondary circulation of the vortex. Total AAM integrated over a cylinder of radius of 2000 km decreased with simulation time, but total kinetic energy increased rapidly. From the budget analysis, it was found that the surface friction is mainly responsible for the decrease of total AAM. Also, contribution of the surface friction to the AAM loss was about 90% while that of horizontal advection was as small as 8%. The trajectory of neutral numerical tracers following the secondary circulation was presented for the Lagrangian viewpoint of the transports of absolute angular momentum. From the analysis using the trajectory of tracers it was found that the air parcel was under the influence of the surface friction continuously until it leaves the boundary layer near the core. Then the air parcel with reduced amount of angular momentum compared to its original amount was transported from boundary layer to upper level of the vortex and contributed to form the anti-cyclone. These results suggest that the tropical cyclone loses angular momentum as it develops, which is due to the dissipation of angular momentum by the surface friction.

• 한국분말재료학회지
• /
• 제16권1호
• /
• pp.9-15
• /
• 2009

Amorphization and crystallization behaviors of $Ti_{50}Cu_{50}Ni_{20}Al_{10}$ powders during high-energy ball milling and subsequent heat treatment were studied. Full amorphization obtained after milling for 30 h was confirmed by X-ray diffraction and transmission electron microscope. The morphology of powders prepared using different milling times was observed by field-emission scanning electron microscope. The powders developed a fine, layered, homogeneous structure with prolonged milling. The crystallization behavior showed that the glass transition, $T_g$, onset crystallization, $T_x$, and super cooled liquid range ${\Delta}T=T_x-T_g$ were 691,771 and 80 K, respectively. The isothermal transformation kinetics was analyzed by the John-Mehn-Avrami equation. The Avrami exponent was close to 2.5, which corresponds to the transformation process with a diffusion-controlled type at nearly constant nucleation rate. The activation energy of crystallization for the alloy in the isothermal annealing process calculated using an Arrhenius plot was 345 kJ/mol.

• Journal of Pharmaceutical Investigation
• /
• 제35권6호
• /
• pp.453-460
• /
• 2005

4-Aminopyridine (AP) is a potassium channel blocker used in the treatment of neurological disorders such as multiple sclerosis and Alzheimer disease. AP‘s window of therapeutic effect appears to correlate with its plasma halflife (3.5 hours). It demonstrates pH-dependent solubility because of a weakly basic drug. In addition, the resulting release from conventional matrix tablets decreases with increasing pH-milieu of the gastrointestinal tract. The aim of this study is to design sustained release matrix tablet containing AP, overcoming this problem. $Eudragit^{\circledR}$ L 100 (EuL) and sodium alginate were used in an effort to achieve pH independent drug release. The effect of sodium alginate and EuL on drug release from matrix tablet was investigated. The drug release behavior from the different tablets was analyzed by $t_{20%},\;t_{40%},\;t_{60%}$, The exponential diffusion coefficient n, kinetic constant K were calculated according to the Korsmeyer-Peppas equation. The drug release from matrix tablets prepared with sodium alginate was decreased with increasing the content of sodium alginate in pH 7.4 while there is no significant difference in pH 1.2. The exponent n values were determined to be approximately 0.5 and 0.8 respectively, in both pH 1.2 and 7.4. These values indicate diffusion-based anomalous mechanism and erosion-based anomalous mechanism, respectively. The drug release from sodium alginate matrix tablets prepared with solid dispersion of EuL containing drug showed a slow drug release in an acidic medium and a more fast drug release in phosphate medium, compared with sodium alginate matrix tablets prepared with physical mixture. These results may be attributed to the gel forming ability of sodium alginate and pH dependent solubility of EuL. Therefore, sustained-release AP matrix tablets using sodium alginate and EuL were successfully prepared.

• 방사성폐기물학회지
• /
• 제4권3호
• /
• pp.209-216
• /
• 2006

중성자가 조사된 흑연에 내재되어 있는 Wigner 에너지를 배출시키는 방법의 하나인 가열냉각공정의 적용 예로 DSC(미분 주사선 열량계) 측정을 통해 흑연으로부터 Wigner 에너지가 배출되는 열 배출 특성을 연구하였다. 일정온도 상승 방법 에 의한 DSC 운전에서 중성자가 조사된 흑연을 가열냉각(annealing)하는 동안 배출되는 Wigner 에너지의 총량과 처리온도에 따른 배출속도를 측정하였다. 연구로 2호기(KRR-2) thermal column 내에 위치별로 중성자의 조사량에 차이가 나는 흑연 시료를 분말로 만들어 상온에서 $500^{\circ}C$까지의 온도 범위에서 DSC를 운전하고 이로부터 Wigner 에너지의 배출 속도를 측정하였다. 가열냉각 동안 중성자가 조사된 흑연에서 배출되는 Wigner 에너지의 배출 특성은 가변적 활성화 에너지 속도 식으로 잘 상관시킬 수 있었다.

• 산경연구논집
• /
• 제9권3호
• /
• pp.69-79
• /
• 2018

Purpose - Competition among cities around the world are rapidly shifting from competition of production factors such as labor costs and quality of raw materials to competition between the consumption factors such as quality of life, settlement environment, culture, and place. The entry into the era of competition between consumption factors is not only attracting investment for strengthening city competitiveness, but also actively inducing urban image reconstruction and new image making. Therefore, various studies related to urban marketing are being carried out. The object of this study is to investigate the effect of city brand image on city brand recognition and city loyalty based on the questionnaire of external citizens about Changwon city. Research design, data, and methodology - The data were collected from 200 Seoul and Busan citizens. Reliability and exploratory factor analysis were conducted through the SPSS program, and confirmatory factor analysis and structural equation modeling were conducted by using the AMOS program. Results - As a result of the hypothesis test, six hypotheses were adopted among the nine hypotheses. In summary, pleasant image, dynamic image, and good administrative image have a significant positive impact on city brand recognition. The magnanimous image did not have a significant effect on city brand recognition. In the impact of city brand image on city loyalty, magnanimous image and good administrative image had significant positive impact on city loyalty. Pleasant images and dynamic images did not significantly affect city loyalty. In addition, city brand recognition positively influenced city loyalty. Conclusions - First, it is possible to say that there is an academic significance of this research in its contribution to regional revitalization by investigating mutual influences in urban aspect by combining place marketing with image, recognition, and loyalty. Secondly, kinetic images such as pleasant image and dynamic image have more influence on recognition, and static images such as magnanimous images have more influence on loyalty. So, further research will be necessary to establish theories. Finally, In order to increase city brand recognition and city loyalty to local city, efforts should be made to improve urban images such as pleasant image, magnanimous image, dynamic image, and good administrative image.

• 농약과학회지
• /
• 제18권2호
• /
• pp.61-68
• /
• 2014

사과 중 살응애제 etoxazole 및 flufenoxuron의 출하 전 잔류허용기준(PHRL)을 설정하기 위해 각 농약의 생물학적 반감기와 감소상수가 산출되었다. 안전사용기준의 희석배수에 따라 조제된 각 농약을 사과에 대하여 각각 1회 및 3회 살포한 후 사과 중 일자별 잔류량을 조사하였으며, 잔류시험 결과들은 first order kinetics의 지수감소식에 대입되었다. 시험기간 중 두 농약의 잔류량은 모두 잔류허용기준(MRL) 미만으로 나타났으며, 사과 중 생물학적 반감기를 조사한 결과 etoxazole의 경우 1회 처리구에서 8.8일, 3회 처리구에서 21.7일로 나타났다. 반면에 flufenoxuron은 1회 처리구에서 21.7일, 3회 처리구에서 23.1일로 나타나 etoxazole 보다 반감기가 더 길었다. 사과 중 각 농약의 감소상수는 etoxazole은 0.0788, flufenoxuron은 0.0319이었으며, 산출된 감소상수들을 대입하여 PHRL을 계산하였다. 그 결과, 안전사용기준을 준수한 농약살포 시 출하 일주일 전 농약의 잔류량이 etoxazole은 0.87 mg/kg, flufenoxuron은 0.88 mg/kg 이하이면 출하 시 잔류량이 MRL 이하일 것으로 예측되었다.

• 대한환경공학회지
• /
• 제37권11호
• /
• pp.642-648
• /
• 2015

수계에 존재하는 인산염의 흡착제거 용량을 향상시키기 위하여, 참나무 기반 활성탄을 제조하였으며, 이때 $Fe^{3+}$와 $Al^{3+}$이온의 혼합물을 흡착제 표면에 담지 하였다. 금속담지 활성탄의 인산염의 흡착용량은 금속이온으로 표면을 개질 하지 않은 활성탄에 비해 약 8배 높게 나타났다. 흡착평형량은 흡착반응의 온도가 증가할수록 증가하였으며, Langmuir 흡착등온식의 경향과 일치하였다. 제조된 금속담지 활성탄의 인산염 흡착제거공정은 흡열의 자발반응으로 진행되었음을 확인하였다. 흡착공정의 거동과 제거속도를 평가하기 위하여, 세공확산모델을 통해 내부 확산계수를 산출하였으며, 이는 실험결과와 매우 일치하였다.

• 대한환경공학회지
• /
• 제22권7호
• /
• pp.1213-1223
• /
• 2000

CDQ 분진을 흡착제로 사용하여 페놀의 흡착제거 양상을 검토하였다. CDQ 분진의 흡착능은 300 ppm의 페놀 용액에 대해 흡착평형시간 60분에서 약 42%의 흡착율을 보이는 것으로 나타났다. 페놀의 초기농도를 달리하여 흡착실험한 결과, 실험조건범위에서 농도가 증가함에 따라 흡착제거율이 증가하였으며 흡착양상은 Freundlich 등온흡착식에 잘 적용되었다. 흡착의 속도론적 해석시, 시간에 따른 속도식의 차수는 1차, 1.5차, 그리고 2차로 변화하는 것으로 파악되었다. 온도에 따른 흡착에서는 온도가 상승함에 따라 흡착제거량이 증가하여 흡열임을 보였으며, 이의 결과를 바탕으로 흡착에 대한 열역학적 데이터를 도출하였다. pH변화에 따른 페놀의 흡착량은 거의 변화가 없는 것으로 관찰되었으나, pH 11 이상의 영역에서는 다소 감소하는 것으로 나타났다.

• Korean Chemical Engineering Research
• /
• 제58권4호
• /
• pp.624-634
• /
• 2020

The ability of natural and modified clay to adsorb phenol was studied. The clay samples were analyzed by different technical instruments, such as X-ray fluorescence (XRF), X-ray diffraction (XRD) and FT-IR spectroscopy. Surface area, pore volume and average pore diameter were also determined using B.E.T method. Up to 73 and 99% of phenol was successfully adsorbed by natural and activated clay, respectively, from the aqueous solution. The experiments carried out show that the time required to reach the equilibrium of phenol adsorption on all the samples is very close to 60 min. The amount of phenol adsorbed shows a declining trend with higher pH as well as with lower pH, with most extreme elimination of phenol at pH 4. The adsorption of phenol increases proportionally with the initial phenol concentration. The maximum adsorption capacity at 25 ℃ and pH 4 was 29.661 mg/g for modified clay (NaMt). However, the effect of temperature on phenol adsorption was not significant. The simple modification causes the formation of smaller pores in the solid particles, resulting in a higher surface area of NaMt. The equilibrium results in aqueous systems were well fitted by the Freundlich isotherm equation (R² > 0.98). Kinetic studies showed that the adsorption process is best described by the pseudo-second-order kinetics (R² > 0.99). The adsorption of phenol on natural and modified clay was spontaneous and exothermal.