• ETRI Journal
• /
• v.33 no.5
• /
• pp.791-801
• /
• 2011

Security in wireless sensor networks (WSNs) is an upcoming research field which is quite different from traditional network security mechanisms. Many applications are dependent on the secure operation of a WSN, and have serious effects if the network is disrupted. Therefore, it is necessary to protect communication between sensor nodes. Key management plays an essential role in achieving security in WSNs. To achieve security, various key predistribution schemes have been proposed in the literature. A secure key management technique in WSN is a real challenging task. In this paper, a novel approach to the above problem by making use of elliptic curve cryptography (ECC) is presented. In the proposed scheme, a seed key, which is a distinct point in an elliptic curve, is assigned to each sensor node prior to its deployment. The private key ring for each sensor node is generated using the point doubling mathematical operation over the seed key. When two nodes share a common private key, then a link is established between these two nodes. By suitably choosing the value of the prime field and key ring size, the probability of two nodes sharing the same private key could be increased. The performance is evaluated in terms of connectivity and resilience against node capture. The results show that the performance is better for the proposed scheme with ECC compared to the other basic schemes.

• Journal of Korea Multimedia Society
• /
• v.7 no.7
• /
• pp.922-933
• /
• 2004

In recent years, peer-to-peer network have a greate deal of attention for distributed computing or collaborative application, and work of ID-based public key systems have been focusing on the area of cryptography. In this paper, we propose ID-based group key management protocols for secure communication in autonomous peer group. Each member obtains his public/private key pair derived from his identification string from Private Key Generator. No central server participates in group key management protocol instead, all group members share the burden of group key management by the collaboration of themselves, so that our scheme avoids the single point of failure problem. In addition, our scheme considers the nature of dynamic peer group such as frequent joining and leaving of a member.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1138-1141
• /
• 2008

By defining a uniform reference point array corresponding to the 3D voxel array and abandoning voxels whose deviations from their respective reference points exceed a given tolerance, the distribution of voxels within the volumetric 3D image space gets uniform, effects of non-uniform distribution upon the image reconstructing are eased.

• ETRI Journal
• /
• v.37 no.4
• /
• pp.696-706
• /
• 2015

This paper presents an achievable secure videoconferencing system based on quantum key encryption in which key management can be directly applied and embedded in a server/client videoconferencing model using, for example, OpenMeeting. A secure key management methodology is proposed to ensure both a trusted quantum network and a secure videoconferencing system. The proposed methodology presents architecture on how to share secret keys between key management servers and distant parties in a secure domain without transmitting any secrets over insecure channels. The advantages of the proposed secure key management methodology overcome the limitations of quantum point-to-point key sharing by simultaneously distributing keys to multiple users; thus, it makes quantum cryptography a more practical and secure solution. The time required for the encryption and decryption may cause a few seconds delay in video transmission, but this proposed method protects against adversary attacks.

• The Journal of Society for e-Business Studies
• /
• v.6 no.1
• /
• pp.17-33
• /
• 2001

EC(Electronic Commerce) which is done on the virtual space through Internet has strong point like independence from time and space. On the contrary, it also has weak point like security problem because anybody can access easily to the system due to open network attribute of Internet, Therefore, we need the solutions that protect the EC security problem for safe and useful EC activity. One of these solutions is the implementation of strong cipher system. YK2(Young Ku King) cipher system proposed in this paper is good solution for the EC security and it overcome the limit of current block cipher system using 128 bits key length for input, output, encryption key and 32 rounds. Moreover, it is designed for the increase of time complexity by adapting more complex design for key scheduling algorithm regarded as one of important element effected to encryption.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.1
• /
• pp.404-421
• /
• 2020

A reversible data hiding scheme in JPEG compressed bitstreams is proposed, which could avoid decoding failure and file expansion by means of removing of bitstreams corresponding to high frequency coefficients and embedding of secret data in file header as comment part. We decode original JPEG images to quantified 8×8 DCT blocks, and search for a high frequency as an optimal termination point, beyond which the coefficients are set to zero. These blocks are separated into two parts so that termination point in the latter part is slightly smaller to make the whole blocks available in substitution. Then spare space is reserved to insert secret data after comment marker so that data extraction is independent of recovery in receiver. Marked images can be displayed normally such that it is difficult to distinguish deviation by human eyes. Termination point is adaptive for variation in secret size. A secret size below 500 bits produces a negligible distortion and a PSNR of approximately 50 dB, while PSNR is also mostly larger than 30 dB for a secret size up to 25000 bits. The experimental results show that the proposed technique exhibits significant advantages in computational complexity and preservation of file size for small hiding capacity, compared to previous methods.

• Journal of Sensor Science and Technology
• /
• v.13 no.2
• /
• pp.114-120
• /
• 2004

The $Comet{\acute{e}}$ Consultatif de $Thermom{\acute{e}}trie$ (CCT) under the Comete International des Poids et Measures (CIPM) has decided to perform the Key Comparison (KC) for triple point of water cells used as a reference fixed point of thermometry at the 21st meeting held at November 2001, and the Bureau International des Poids et Measures (BIPM) has been nominated as a KC coordinator. According to the KC protocol prepared by BIPM, KRISS performed the KC experiments and evaluate a uncertainty. The temperature difference between two reference cells for the Korea Research Institute of Standards and Science (KRISS) and a test cell for the transfer standard, which is moved to BIPM was 0.024 mK and the combined standard uncertainty evaluated 0.055 mK.

• Earthquakes and Structures
• /
• v.23 no.4
• /
• pp.363-371
• /
• 2022

Traditional metal dampers have disadvantages such as a higher yield point and inadequate adjustability. The experimental results show that the low yield point steel has superior energy dissipation hysteretic capacity and can be applied to seismic structures. To overcome these deficiencies, a novel compound metal damper comprising both low yield point steel plates and common steel plates is presented. The optimization objectives, including "maximum rigidity" and "full stress state", are proposed to obtain the optimal edge shape of a compound metal damper. The numerical results show that the optimized composite metal damper has the advantages such as full hysteresis curve, uniform stress distribution, more sufficient energy consumption, and it can adjust the yield strength of the damper according to the engineering requirements. In view of the mechanical characteristics of the compound metal damper, the equivalent model of eccentric cross bracing is established, and the approximate analytical solution of the yield strength and the yield displacement is proposed. A nonlinear simulation analysis is carried out for the overall aseismic capacity of three-layer-frame structures with a compound metal damper. It is verified that a compound metal damper has better energy dissipation capacity and superior seismic performance, especially for a damper with double-objective optimized shape.

• Journal of Korea Multimedia Society
• /
• v.5 no.6
• /
• pp.683-696
• /
• 2002

The existing block encryption algorithms have been designed for the encryption key value to be unchanged and applied to the round functions of each block, and enciphered. Therefore, it has such a weak point that the plaintext or encryption key could be easily exposed by differential cryptanalysis or linear cryptanalysis, both are the most powerful methods for decoding block encryption of a round-repeating structure. In order to overcome with this weak point, an encryption algorithm using a mote efficient key should be designed. In this paper, a block encryption algorithm which is designed for each encryption key value to be applied to each round block with different value is proposed. This algorithm needs a short processing time in an encryption and decryption, has a high intensity, can apply to electronic commerce and various applications of data protection.

• Steel and Composite Structures
• /
• v.25 no.3
• /
• pp.327-335
• /
• 2017

To gain more knowledge of aluminum foam sandwich structure and promote the engineering application, aluminum foam sandwich consisting of 7050 matrix aluminum foam core and 304 stainless steel face-sheets was studied under three-point bending by WDW-T100 electronic universal tensile testing machine in this work. Results showed that when aluminum foam core was reinforced by 304 steel face-sheets, its load carrying capacity improved dramatically. The maximum load of AFS in three-point bending increased with the foam core density or face-sheet thickness monotonically. And also when foam core was reinforced by 304 steel panels, the energy absorption ability of foam came into play effectively. There was a clear plastic platform in the load-displacement curve of AFS in three-point bending. No crack of 304 steel happened in the present tests. Two collapse modes appeared, mode A comprised plastic hinge formation at the mid-span of the sandwich beam, with shear yielding of the core. Mode B consisted of plastic hinge formation both at mid-span and at the outer supports.