• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.7 s.349
• /
• pp.32-40
• /
• 2006

It is very important to establish a pairwise key securely in wireless sensor networks. Because sensor networks consist of devices with weak physical security, they are likely to be compromised by an attacker. However, some approaches using key pre-distribution and other approaches using one hop local keys are known to be very vulnerable to threats caused by compromised nodes, even a small number. This paper proposes a scheme where each node establishes three hop local keys and employs them for a later pairwise key establishment. When any two nodes agree a pairwise key, all nodes on the route between two nodes contribute to the agreement of the pairwise key. Here, the initial three hop local keys are employed for encrypting a secret key delivered from a node to other nodes. Therefore, the proposed scheme bothers attackers to compromise much more nodes than the scheme using one hop local keys only. The simulation results have proven that the proposed scheme provides better performance and higher security than the scheme using one hop local keys in terms of message exchange, the number of encryption and decryption, and pairwise key exposure rate.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.4
• /
• pp.398-422
• /
• 2017

Objectives: The major aim of this study is to construct the database of retrospective exposure assessment for crystalline silica through reviews of literatures in South Korea. Methods: Airborne concentrations of crystalline silica were collected using an academic information search engine, Research Information Service System(RISS), operated by the Korea Education & Research Information Service(KERIS). The key words used for the literature search were 'silica', 'crystalline silica', 'cristobalite', 'quartz' and 'tridymite'. A total number of 18 published documents with the information of crystalline silica level in air or bulk samples were selected and used to estimate retrospective exposures to crystalline silica. Weighted arithmetic mean(WAM) calculated across studies was summarized by industry type. Industries were classified according to Korea Standard Industrial Classification(KSIC) using information provided in the literature. Results: A total of 2,131 individual air sampling data measured from 1987 to 2012 were compiled. Compiled individual measurement data consisted of 827 respirable crystalline silica (RCS), 31 total crystalline silica(TCS), 24 crystalline silica(CS), 778 respirable dust(RD) and 471 total dust(TD). Most of RCS measurements(68.9%) were collected from 'cast of metals(KSIC 243)'. Comparing industry types, 'mining coal and lignite(KISC 051)' showed the highest WAM concentration of RCS, $0.14mg/m^3$, followed by $0.11mg/m^3$ of 'manufacture of other non-metallic mineral products(KSIC 239)', $0.108mg/m^3$ of 'manufacture of ceramic ware(KSIC 232)', $0.098mg/m^3$ of 'heavy construction(KSIC 412)' and $0.062mg/m^3$ of 'cast of metals(KSIC 243)'. In terms of crystalline silica contents in airborne dust, 'manufacture of other non-metallic mineral products(KSIC 239)' showed the highest value of 7.3%(wt/wt), followed by 6.8% of 'manufacture of ceramic ware(KSIC 232)', 5.8% of 'mining of iron ores(KSIC 061)', 4.9% of 'cast of metals(KSIC 243)' and 4.5% of 'heavy construction(KSIC 412)'. WAM concentrations of RCS had no consistent trends over time from 1994 ($0.26mg/m^3$) to 2012 ($0.12mg/m^3$). Conclusion: The data set related RCS exposure level by industries can be used to determine not only the possibility of retrospective exposure to RCS, but also to evaluate the level of quantitative retrospective exposure to RCS.

• Journal of Radiation Protection and Research
• /
• v.34 no.2
• /
• pp.87-94
• /
• 2009

Tritium is the one of the dominant contributors to the internal radiation exposure of workers at pressurized heavy water reactors (PHWRs). This nuclide is likely to release to work places as tritiated water vapor (HTO) from a nuclear reactor and gets relatively easily into the body of workers by inhalation. Inhaled tritium usually reaches the equilibrium of concentration after approximately 2 hours inside the body and then is excreted from the body with a half-life of 10 days. Because tritium inside the body transports with body fluids, a whole body receives radiation exposure. Internal radiation exposure at PHWRs accounts for approximately 20-40% of total radiation exposure; most internal radiation exposure is attributed to tritium. Thus, tritium is an important nuclide to be necessarily monitored for the radiation management safety. In this paper, metabolism for tritium is established using its excretion rate results in urine samples of workers at PHWRs and an effective half-life, a key parameter to estimate the radiation exposure, was derived from these results. As a result, it was found that the effective half-life for workers at Korean nuclear power plants is shorter than that of International Commission on Radiological Protection guides, a half-life of 10 days.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.4
• /
• pp.317-330
• /
• 2021

Objectives: By law, companies in Korea must periodically measure workers' exposure to harmful chemicals (the system is called the Work Environment Monitoring Program (WMP)[a]) and report the results to the government. The government also measures exposure to monitor the WMP's reliability (called Reliability Assessment (RA) for WMP[b]). The issue is that measured data from these two sources are so different that the objectivity of WMP needs to be confirmed by comparing the results using the European Centre for Ecotoxicology and Toxicology of Chemicals' Targeted Risk Assessment (ECETOC TRA). Methods: Step 1: Data collection from WMP reports submitted by companies (n=586) and RA for WMP written by the government (n=33). Step 2: Data Standardization by key information included. Step 3: Data conversion to input-variables required to run the ECETOC TRA model, and run the model with specific data (n=514) which meet the predetermined exposure scenario. Step 4: Statistical data analysis by process category (PROC) and ventilation type from each source ([A] and [B]). Step 5: Additional analysis of any unexpected results. Results: The process categories of the production and handling of Dichloromethane were classified into 12 PROCs, and ten of them were selected to run ECETOC TRA. Modeled values tended to be higher than measured values from both sources. For the measured values from WMP, RCR distribution by PROC was narrow (0.197-0.267, 95% CI) and did not have a relationship with ventilation type, which differs from the tendency of the modeling result. Meanwhile, the measured values from RA for WMP were relatively widely distributed (0.301-1.177, 95% CI) by PROC. In particular PROCs (13,19) were high enough to exceed 1. Also, they become low with better ventilation types and appear differently depending on the ventilation type, similar to the model result. Conclusions: This study revealed that ECETOC TRA might have the potential to serve as a screening tool for exposure assessment and to be used as assistive method for WMP to estimate exposure. Further empirical study is required to confirm its availability as a screening tool.

• The KIPS Transactions:PartC
• /
• v.13C no.5 s.108
• /
• pp.541-548
• /
• 2006

Sensor network is a network for realizing the ubiquitous computing circumstances, which aggregates data by means of observation or detection deployed at the inaccessible places with the capacities of sensing and communication. To realize this circumstance, data which sensor nodes gathered from sensor networks are delivered to users, in which it is required to encrypt the data for the guarantee of secure communications. Therefore, it is needed to design key management scheme for encoding appropriate to the sensor nodes which feature continual data transfer, limited capacity of computation and storage and battery usage. We propose a key management scheme which is appropriate to sensor networks organizing hierarchical architecture. Because sensor nodes send data to their parent node, we can reduce routing energy. We assume that sensor nodes have different security levels by their levels in hierarchy. Our key management scheme provides different key establishment protocols according to the security levels of the sensor nodes. We reduce the number of sensor nodes which share the same key for encryption so that we reduce the damage by key exposure. Also, we propose key update protocols which take different terms for each level to update established keys efficiently for secure data encoding.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.5
• /
• pp.302-309
• /
• 2000

The tracking characteristics of silicone rubber degraded by accelerated outdoor exposure employing a weather-o-meter were investigated. The tracking test was performed according to ICE Publ.587 method but the concentration of conductive solution was two times higher than IEC standard in order to accelerate the tracking failure. The number of large effective scintillation and the current of high voltage circuit were measured simultaneously. It was shown that the number of effective scintillation had valuable information of the tracking degradation state of silicone rubber, while the average current between electrodes could not provide information enough for diagnosis. Based upon the experimental results, it could be said that the key factor accelerating tracking failure was not Joule heating by current but pyrolysis by burning of silicone rubber, and that reduction of contact angle was due to chain scission which resulted in the free radicals of low molecules.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.8
• /
• pp.1222-1228
• /
• 2006

Two kinds of Haematococcus pluvialis cells (green vegetative cells cultivated under optimal cell culture conditions and red cyst cells maintained under high light stress conditions to induce astaxanthin production) were used to investigate the protein expression profiles by two-dimensional electrophoresis, image analysis, and peptide mass fingerprinting. The cellular accumulation of astaxanthin was evident after exposure to high light intensity and reached the maximum cellular level after 78 h of high light stress. In a 2-D electrophoresis analysis, 22 proteins were upregulated over 2-fold in the red cyst cells when compared with the green vegetative cells and selected for further analysis by chemically assisted fragmentation (CAF)-MALDI-TOF sequencing to identify the protein functions. Among 22 different spots, several key enzymes specific to the carotenoid pathway, including isopentenyl pyrophosphate isomerase (IPP) and lycopene $\beta$-cyclase, appeared in H. pluvialis after exposure to high light intensity. Therefore, IPP and lycopene $\beta$-cyclase would appear to be involved with carotenoid accumulation in the cytoplasm, as these peptides were preferentially upregulated by high light intensity preceding an increase in carotenoid, and only these forms were detected in the red cyst cells.

• Communications for Statistical Applications and Methods
• /
• v.23 no.1
• /
• pp.1-20
• /
• 2016

Causal inference methodologies have been developed for the past decade to estimate the unconfounded effect of an exposure under several key assumptions. These assumptions include, but are not limited to, the stable unit treatment value assumption, the strong ignorability of treatment assignment assumption, and the assumption that propensity scores be bounded away from zero and one (the positivity assumption). Of these assumptions, the first two have received much attention in the literature. Yet the positivity assumption has been recently discussed in only a few papers. Propensity scores of zero or one are indicative of deterministic exposure so that causal effects cannot be defined for these subjects. Therefore, these subjects need to be removed because no comparable comparison groups can be found for such subjects. In this paper, using currently available causal inference methods, we evaluate the effect of arbitrary cutoffs in the distribution of propensity scores and the impact of those decisions on bias and efficiency. We propose a tree-based method that performs well in terms of bias reduction when the definition of positivity is based on a single confounder. This tree-based method can be easily implemented using the statistical software program, R. R code for the studies is available online.

• Proceedings of the Korean Society of Tobacco Science Conference
• /
• 1997.10a
• /
• pp.30-78
• /
• 1997

Exposure of nonsmokers to environmental tobacco smoke (ETS) has been claimed to be associated with an increased risk for lung cancer e. g., in the US, Europe, Japan and several Asian countries. The present paper reports on and discusses the scientific evidence available to date that can be used in order to assess this potential risk for Korea. Evidence related to three key steps in risk assessment, i.e., the characterization of a potential risk, data associating a response to a dose, and data characterizing actual exposures of people to ETS will be reviewed. The final assessment of the potential risk will be left to those qualified and commissioned with the task of risk assessment as a basis for public health policy in Korea.

• Convergence Security Journal
• /
• v.19 no.4
• /
• pp.189-195
• /
• 2019

PPL advertising is growing due to the cheaper cost than other TV commercials, the familiar image construction from natural exposure in video, and the overseas marketing effects from programs export. However, it is difficult to provide additional information on PPL advertising targets in addition to short video exposure due to the restriction that they should be exposed without antagonizing viewers. This study designed a data service that supports PPL advertising, which provides additional information for PPL advertising targets. Specifically, the user scenario and user interface of the data service were designed considering the characteristics of the TV platform, the key additional information was defined by distinguishing the typical types of PPL advertisement, and the information on when PPL advertising targets should be exposed in the program was devised. We also developed a DVB-SI based method to provide the supplementary information to the data service.