• Fashion & Textile Research Journal
• /
• v.20 no.4
• /
• pp.464-473
• /
• 2018

The objective of this study is to develop a sizing system of fitness clothing that can properly accommodate various body sizes of Korean senior women. The sizing system of upper and lower fitness clothing was developed in the present study by selection of key variables, identification of size category candidates, and determination of an optimal sizing system. First, key anthropometric dimensions (stature and bust circumference for upper clothing and stature; waist circumference for lower clothing) were identified by factor analysis on the direct body measurements (n = 272) and 3D whole-body scan data (n = 271) of Korean senior women in Size Korea. Second, sizing system candidates based on the key dimensions of upper and lower clothing were explored using a grid method and an optimization method. Lastly, among the sizing system candidates, optimal sizing systems of upper and lower clothing were selected in terms of accommodation rate. Five size categories (short/small, short/medium, tall/small, tall/medium, and tall/large) were selected as the optimal sizing systems of upper and lower clothing with 89% and 78% of accommodation rate, respectively, for the Korean senior women. The anthropometric characteristics of the representative humans of the optimal size categories would be of use in the design of fitness compressive wear for the better fit and effectiveness of exercise and health of Korean senior women.

• The International Journal of Costume Culture
• /
• v.8 no.1
• /
• pp.43-50
• /
• 2005

This research analyzed the anthropometric data for Filipino plus-size women. The study aims to identify key dimensions used for the sizing system that can improve on fit and style concerns/issues for the plus-sizes. This study also develop a reference of body measurements for Filipino plus-size women from the data collected. The data was collected from subjects residing or working in the University of the Philippines and within Metro Manila. The full figure body shapes have been derived from the raw anthropometric data. The pear and the barrel shapes were derived figure types based on the anthropometric data collected. These body types show that weight distribution is on the lower torso for the pear and the upper torso for the barrel.

• Fashion & Textile Research Journal
• /
• v.26 no.1
• /
• pp.25-34
• /
• 2024

This study investigates consumer awareness and concerns regarding apparel sizing in the realm of online shopping. A survey was conducted with 450 women aged 18-59 who had engaged in online clothing purchases within the past year. It was observed that consumers shop for clothes online an average of 1.6 times per month, with those under 50 shopping more frequently. The importance of size is higher when buying pants than jackets, especially in online shopping compared to offline purchases. Key references guiding online shopping decisions encompassed product sizing codes, customer reviews, and garment dimensions, which were notably favored by consumers with significant concerns. Respondents opted for Korean-style sizing codes for jackets but chose inch-sizing codes for pants. While awareness of height and weight remains high, knowledge of specific body measurements crucial for clothing size design is lacking, suggesting inadequate communication of size information. Respondents prioritized specific areas for jacket and pants fit, yet the lack of comprehensive self-measurements beyond height and weight might present challenges in determining fit based solely on product dimensions. To address this issue, online retailers should display essential garment dimensions and visually suggest clothing sizes according to various body types. These findings provide valuable insights for online retailers to effectively present size information and lay a foundational framework for consumer size education.

• International Journal of Costume and Fashion
• /
• v.5 no.1
• /
• pp.14-25
• /
• 2005

The objective of this study is to understand bodily extension and identity in contemporary fashion art through the analysis of 'the fashion acting on the body' among the fashion theory excluding body and the conspicuous works on the opening and covering images as a fashion art as a body-space'. This study also investigated identity problems where there are poles apart in opening and closure their bodies and body-space in which its clothing types were distorted by being de-bodilization out of the traditional and ideological expression method in contemporary fashion art from a opening and closure point of view. Image of opening and closure among body-space in fashion art can be classified into opposing structure of opening and closure. Destroying the boundary between bodily opening and closure for a primary function of clothing and dismantling the role and boundary between body and clothing, opening body-space in appearance as a reemergence of body image or the border between inner and outer are being ambiguous because of transparent material. Being representative work of this study opening body-space was expressed as an opening space image using transparency. On the contrary, closure body-space was isolated from external environment and confined in the certain space, which could limit or restraint body- action. Excluding boundary of body and clothing on the whole or in part, boundary of work becomes body-space. However, these were appeared to be a work inducing unlimited curiosity and meaning from the audience. The interpretation of artistic and body-space in fashion art are indicating the role and function of the fashion art exceeding the suggestible dimensions in the every day life of fashion. The body-space of fashion art showing similar aspect of body art today could be understood that it is substituted into an metaphorical, critical space by seeing it as a symbol system connected with social space. Therefore, contemporary fashion art should be interpreted as an equivocal space looking at the body-space with open mind.

• The Korean Journal of Pain
• /
• v.31 no.4
• /
• pp.268-276
• /
• 2018

Background: Although a variety of instruments implement body maps for the precise identification of pain symptoms, no instrument has been validated for use in people with obesity. This study reports the adaptation and validation of body maps for musculoskeletal pain location in people with obesity. Methods: Nine key anatomical regions were highlighted based on the original images of the Nordic Musculoskeletal Questionnaire body maps. Adult silhouettes were generated from photographs of men and women with obesity. The body dimensions were adjusted to take into account the different body fat distribution patterns of people with obesity. The validity of the images was assessed by 12 experts. Subsequently, a data collection stage was performed with 58 patients with severe obesity from both sexes. The reproducibility of the images was tested by comparison with the original images. Results: The results of the validation pilot study indicated that the adapted images facilitated the location of musculoskeletal pain in men and women with obesity. The reproducibility of the original and adapted versions of the body maps indicated good agreement for pain over the last 12 months and 7 days (80% vs. 79.7%). Pain scores in the last 12 months indicated good and high sensitivity and specificity for all body areas (60.9% vs. 89.1%). Considering pain in the last 7 days, high sensitivity and specificity for all areas of the body (85.1% vs. 70.1%). Conclusions: The body maps developed in this study are reliable and valid to identify the location of pain in people with obesity.

• The Research Journal of the Costume Culture
• /
• v.15 no.1 s.66
• /
• pp.137-151
• /
• 2007

This study was performed to narrow down the Sizing System for Female Adult's garments(KS K 0051) following age target and body shapes. The study was based on the sizing system and the anthropometric measurements, called Size-Korea, which were surveyed in the years 2003 and 2004. At first, the subjects of the survey were classified into 4 age groups, $18{\sim}24,\;25{\sim}34,\;35{\sim}49\;and\;50{\sim}59$, based on the most significant differences of body sizes. Secondly, the ranges of four key dimensions - height, bust, waist and hip-of normal sizes were identified through analyzing Rohrer index and percentile. The selected sizes within the ranges were grouped by the drop which was the subtraction of bust girth from hip girth. In conclusion, there was the most frequent drop for each age group; 9cm drop for the $18{\sim}24$ years old group, the 6cm drop for the $25{\sim}34$ years old and $35{\sim}49$ years old and 3cm drop for $50{\sim}59$ years old. The upper body garment sizes of the same drop and target ages could be merged to 10 to 12 sizes, which were remarkably smaller than the Female Adult garment sizing system, and further to 2-5 sizes, considering the percentile importance. However, $50{\sim}59$ years old group needed to be analyzed in different ways, because the number of subjects of normal size in the age decreased rapidly, that the normal sizes for them were very limited. In addition, the reference body sizes of each garment size were apparently different when they were compared to each age groups. These basic data for garment size specification could be usefully adapted for the apparel companies' own sizing system according to their age target and body shapes, to achieve efficient production and better fit.

• Asia pacific journal of information systems
• /
• v.9 no.2
• /
• pp.19-37
• /
• 1999

Computer aided process planning(CAPP) is a key for implementing CIM. It is bridge between CAD and CAM and translates the design information into manufacturing instructions. Generally, manufacturing is an area where intelligent systems will not be able to rely on methods requiring formalized knowledge. Manufacturing lacks a body of knowledge that is specific, formalized, and rigorous, and which can be coded as rules or procedures. Thus expertise in manufacturing is developed over a period of many years. Case-based reasoning(CBR) offers a new approach for developing intelligent system. In the case-based approach the problem solving experience of the experts is encoded in the form of cases. CBR's retrieval process can be divided to two step. The first step is matching step, and the second step is selection step. For selecting base case, new preference heuristics were introduced using similarity concept. Similarity concept has three has three dimensions, i.e. entity similarity, structural similarity, and goal similarity. In this paper, bolt's process planning was selected an application domain. Following the test result, the new preference heuristics were approved as a useful procedure in CAPP.

• Journal of Daesoon Thought and the Religions of East Asia
• /
• v.2 no.1
• /
• pp.57-83
• /
• 2022

Numbers structure reality and define the way people live. Both in Daoism and in Daesoon Jinrihoe they signify key concepts, notably the cardinal numbers from one through nine that classify different dimensions of the cosmos. Beyond these, the number twenty-four plays an important role. In a temporal mode, it marks the divisions or seasonal periods of the year. Consisting of fifteen days each, these periods signal (and are named after) changes in dominant weather patterns and the position of the sun. Generally activated in the body through particular seasonal activities and dietary prescriptions, in Daoism they are also the root of a series of healing exercises and certain refinement practices of internal alchemy. In Daesoon Jinrihoe, moreover, they are activated by chanting a specific incantation that invokes the twenty-four divine rulers of the divisions, originally a group of Tang Dynasty officials that in nature and function resemble the spirit generals of the early Celestial Masters. Beyond this, the number twenty-four also applies to space. Not unlike the twenty-eight lunar stations or mansions, traditional cosmology acknowledges twenty-four directions, made up of six constellations each in the four cardinal directions, complete with starry deities and divine generals. Their powers are activated with the help of written characters rather than vocal incantations, using techniques common both in Daoism and Daesoon Jinrihoe.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.2
• /
• pp.483-503
• /
• 2014

In this paper, human action recognition using pyramid histograms of oriented gradients and collaborative multi-task learning is proposed. First, we accumulate global activities and construct motion history image (MHI) for both RGB and depth channels respectively to encode the dynamics of one action in different modalities, and then different action descriptors are extracted from depth and RGB MHI to represent global textual and structural characteristics of these actions. Specially, average value in hierarchical block, GIST and pyramid histograms of oriented gradients descriptors are employed to represent human motion. To demonstrate the superiority of the proposed method, we evaluate them by KNN, SVM with linear and RBF kernels, SRC and CRC models on DHA dataset, the well-known dataset for human action recognition. Large scale experimental results show our descriptors are robust, stable and efficient, and outperform the state-of-the-art methods. In addition, we investigate the performance of our descriptors further by combining these descriptors on DHA dataset, and observe that the performances of combined descriptors are much better than just using only sole descriptor. With multimodal features, we also propose a collaborative multi-task learning method for model learning and inference based on transfer learning theory. The main contributions lie in four aspects: 1) the proposed encoding the scheme can filter the stationary part of human body and reduce noise interference; 2) different kind of features and models are assessed, and the neighbor gradients information and pyramid layers are very helpful for representing these actions; 3) The proposed model can fuse the features from different modalities regardless of the sensor types, the ranges of the value, and the dimensions of different features; 4) The latent common knowledge among different modalities can be discovered by transfer learning to boost the performance.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.20 no.2
• /
• pp.73-87
• /
• 2018

As men in their 30s are spending more money on clothing, it is becoming increasingly important to first conduct an anthropometric study and then develop garment patterns accommodating the changes found in body sizes and types of men in their 30s, in order to effectively address their fit dissatisfaction. Thus this study aims to explore changes in upper body sizes and body types of men in their 30s, which provide basic measurements for designing major garment items including jackets and shirts. To this purpose, key anthropometric dimensions of the upper body of men in their 30s, taken from the 6th (2015) and 7th (2016) surveys conducted by Size Korea, were analyzed using SPSS 24.0 for Windows. Independent sample t-tests were conducted on major upper body sizes to track changes with measuring time. Factor and cluster analyses were used to classify body types. By comparing the two surveys, it was found that the overall body sizes of men in their 30s were increasing in height-related items, circumference, thickness, and width, -as well as body weight and BMIs. Upper body height-related items, in particular, showed a higher average value in the 6th survey than in the 7th, indicating that the overall body types of men are becoming "westernized" with longer legs and shorter torso. Finally, five factors were derived to determine the typical upper body types of men in their 30s and the body types were classified into three categories according to the cluster analysis. First, those with a relatively small build with short stature and torso. Second, those with the highest stature and vertical dimension with the smallest torso volume and least body fatness. Third, those with the biggest torso volume and most body fatness with bigger width between armpits and shoulders. The distributional pattern analysis showed that men in their 30s tend to have increasingly higher stature but lower body weight and BMIs than in the past, implying that their body types are becoming close to those of men in their 20s.