• Korean Chemical Engineering Research
• /
• v.61 no.2
• /
• pp.258-264
• /
• 2023

The greenhouse gas (GHG) emission assessment of kenaf pellet, produced from locally generated kenaf residues in South Korea, has been studied based on the EU RED-II methodology for calculating GHG impact of biomass fuels. Based on the production pathway of kenaf residue pellet and emission coefficients from EU JRC report, the life cycle GHG emission of kenaf residue pellet is assessed as 3.0 gCO₂eq/MJ_pellet and the life cycle GHG emission of electricity generated from kenaf residue pellet is assessed as 11.9 gCO₂eq/MJ when electrical efficiency of final conversion is 25%. The potential GHG emission reduction of electricity produced from kenaf pellet is 90.3% compared to the domestic electricity emission factor 42.8 kgCO₂eq/MWh. Also, the electricity produced from kenaf pellet can reduce at least 59.6% of GHG emission compared to the electricity produced from imported wood pellets.

• Macromolecular Research
• /
• v.16 no.3
• /
• pp.253-260
• /
• 2008

Environmentally friendly biocomposites were made using plant-based natural fibers, such as henequen and kenaf. The natural fiber reinforced polypropylene (PP) and unsaturated polyester (UP) biocomposites were examined in terms of the reinforcing effect of natural fibers on thermoplastic and thermosetting polymers. Kenaf (KE) and henequen (HQ) fibers were treated with an electron beam (EB) of 10 and 200 kGy doses, respectively, or with a 5 wt% NaOH solution. Four types of biocomposites (KE/PP, HQ/PP, KE/UP and HQ/UP) were fabricated by compression molding and each biocomposite was characterized by dynamic mechanical analysis and thermogravimetric analysis. The kenaf fiber had the larger reinforcing effect on the dynamic mechanical properties of both PP and UP biocomposites than the henequen fiber. The highest storage modulus was obtained from the biocomposite with the combination of UP matrix and 200 kGy EB treated kenaf fibers.

• Applied Chemistry for Engineering
• /
• v.33 no.5
• /
• pp.471-476
• /
• 2022

PP/KF felt was used to load a high content of kenaf fiber (KF) into polypropylene (PP), and polyurethane (PU) was used as a binder. In order to find an optimum composition ratio of the PU binder, the flexural strength of the PP/KF/PU felt composite according to the isocyanate and polyol ratio was evaluated. PP-g-MAH grafted with maleic anhydride (MAH) was applied as a compatibilizer. Tensile, flexural, and impact properties were evaluated to consider changes in mechanical properties of the PP/KF/PU felt composite, and the properties were improved.

• Korean Journal of Plant Resources
• /
• v.35 no.6
• /
• pp.820-824
• /
• 2022

Ecologically sustainable means of development is the point to support environmental homeostasis. One of our roles is to find bio-degradable resources that can be substituted for petroleum-based products to effectively abide by the natural viability. To counter the issues of deforestation and preserve biodiversity, it is necessary to produce a non-wood crop that can fulfill the requirement for raw material from which several products can be produced. Kenaf (Hibiscus cannabinus), a member of the family Malvaceae, is showing sufficient potentiality along this road-map. Due to its rich fiber content, it has been used extensively in various fields for long, probably as early as 4,000 BC. At present, kenaf has been used as provider of paper, plastics, fiber glass, biofuel, activated carbon and epoxy composite. This obviously catch one's attention towards its capability to replace petroleum-based products as a whole. Moreover, the plant shows considerable relevance in decreasing pollutants by virtue of its enormous absorption capacity. These multiple applications of kenaf justify its credibility to be the best resource for the better world. The paper presents an overview on its numerous uses reported in the literature that we have investigated and its great potential as a valuable multipurpose crop.

• Journal of agriculture & life science
• /
• v.50 no.2
• /
• pp.25-32
• /
• 2016

A severe outbreak of gray mold on kenaf (Hibiscus cannabinus L.) was observed on kenaf grown in the research field of Gyeongsangnam-do Agricultural Research and Extension Services, Jinju, Korea in 2014. Gray mold appeared on young plants as gray-brown velvety mold covering stems and leaves. Infections that girdled the stem caused wilting above the infected area and developed a canker. The casual fungus formed grayish brown colonies on potato dextrose agar. The conidia were one celled, mostly ellipsoid or ovoid in shape, colorless or pale brown in color, and 6-18 × 4-10 ㎛ in size. The conidiophores were 15-32 ㎛ in length. These measurements and taxonomic characteristics were most similar to those of Botrytis. DNA sequencing and phylogenetic analysis of the complete internal transcribed spacer rRNA gene region confirmed that the fungal isolates were indeed Borytis cinerea. Koch's postulates were supported by pathogenicity tests conducted on healthy plants. On the basis of mycological characteristics and pathogenicity test on host plants, the fungus was identified as Botrytis cinerea. To the best of our knowledge, this is the first report of a gray mold caused by B. cinerea on kenaf in Korea.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.35 no.2
• /
• pp.152-158
• /
• 2015

This study was conducted from 2013 to 2014 in the middle region of Korea to compare the agronomic characteristics, forage production, and quality of kenaf, maize, and a sorghum ${\times}$ sudangrass hybrid. The three crops used in this study were kenaf "Hongma 300," maize "Kwangpyeongok," and the sorghum ${\times}$ sudangrass hybrid "Jumbo" (headless type). The sugar contents of the kenaf, maize, and sorghum ${\times}$ sudangrass hybrid were 5.4%, 4.4%, and 2.5%, respectively. The emergence rates and lodgings of the three crops were sound, as they were more than 80% and 1.5, respectively. The fresh yields of kenaf, maize, and the sorghum ${\times}$ sudangrass hybrid were 117,521 kg/ha, 73,336 kg/ha, and 133,334 kg/ha, respectively, and the dry matter (DM) yields were 28,598 kg/ha, 19,951 kg/ha and 20,083 kg/ha, respectively. The DM yield of kenaf was significantly the highest among the three crops (p<0.05). However, the total digestible nutrients (TDN) contents of the kenaf, corn, and sorghum ${\times}$ sudangrass hybrid were 43.3 %, 72.0 %, and 54.8 %, respectively, and the in vitro digestible dry matter (IVDDM) yields were 44.4%, 73.7%, and 59.6 %, respectively; therefore, the TDN yield of the corn was 13 % significantly higher than that of the kenaf (p<0.05). The TDN yields of the kenaf, corn, and sorghum ${\times}$ sudangrass hybrid were 12,472 kg/ha, 14,350 kg/ha, and 11,001 kg/ha, respectively. Among the three crops, the content of neutral detergent fiber (NDF) and acid detergent fiber (ADF) were highest in the kenaf. This study shows that the kenaf had a good forage productivity but a low forage quality.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.2
• /
• pp.70-76
• /
• 1999

This study was to measure the potential of nonwoody fibrous material, kenaf. Whole stalk of kenaf, Hibiscus cannabinus was separated by two parts of bast and core portion, and cooked separately by alkaline method. Morphological characteristic was evaluated using confocal laser scanning microscope (CLSM) and fiber quality analyzer(FQA). The strength properties of handsheets, made by different mixing ration between kenaf base and core fibers, were measured. Cross-sectional area of bast fibers was smaller than that of core fibers, but the bast fibers had a thick cell wall and narrow lumen area. Bast fibers were longer in length than core fibers. Core fibers had thin cell walls, broad lumen areas, and short lengths, and they had collapsed shape even in water. These characteristics of core fibers affected strength properties of handsheet positively. When the amount of core fibers increased, the strength properties of handsheet were increased. When the amount of bast fibers increased, the handsheet had rougher surface and higher air permeability.

• Journal of the Korean Society of Tobacco Science
• /
• v.11 no.2
• /
• pp.211-224
• /
• 1989

10. Three major factors, freeness, filler and blend ratio that exercised considerable influence on physical properties of cigarette papers were chosen for the sake of their optimization at this experiment. An optimization of those above factors in paper manufacturing was investigated using response surface analysis. Optimum beating degree for Kenaf, Flax and NBKP showed around 72。SR, 68。SR and 85 SR, respectively, in considering of five quality index such as porosity, tensile strength, stretch, whiteness and opacity. The best blending ration of reciprocal pulps treated under optimum beating degree were diversified and combination scope of the bast fiber (Kenaf, Flax) to the NBKP was range from 30% to 65% in case of the Kenaf, from 25 to 40% in Flax at the same receipe. The optimum range of calcium carbonate content revealed 25%~30% in Kenaf mixed NBKP and 24%~31% in Flax mixed NBKP.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2007.11a
• /
• pp.283-287
• /
• 2007

• Journal of Forest and Environmental Science
• /
• v.21 no.1
• /
• pp.98-103
• /
• 2005

Anatomical properties of kenaf cultivated in Korea was investigated using light microscopy. Bast fiber, phloem ray and cortex parenchyma cell were observed in bast, and vessel, wood fiber and ray in core. A lot of solitary and multiple radial pores in core existed. The cell type of ray parenchyma in radial section was procumbent, upright and square cells. Uniseriate and multiseriate rays existed in tangential section. The layer of bast fiber in bast increased with increasing the growth period.