• Nuclear Engineering and Technology
• /
• v.43 no.1
• /
• pp.45-62
• /
• 2011

The Korean nuclear industry is developing a thermal-hydraulic analysis code for safety analysis of pressurized water reactors (PWRs). The new code is called the Safety and Performance Analysis Code for Nuclear Power Plants (SPACE). The SPACE code adopts advanced physical modeling of two-phase flows, mainly two-fluid three-field models which comprise gas, continuous liquid, and droplet fields and has the capability to simulate 3D effects by the use of structured and/or nonstructured meshes. The programming language for the SPACE code is C++ for object-oriented code architecture. The SPACE code will replace outdated vendor supplied codes and will be used for the safety analysis of operating PWRs and the design of advanced reactors. This paper describes the overall features of the SPACE code and shows the code assessment results for several conceptual and separate effect test problems.

• Journal of Positioning, Navigation, and Timing
• /
• v.4 no.3
• /
• pp.97-105
• /
• 2015

A navigation signal based on orthogonal tiered polyphase code was proposed. For the proposed signal, tiered polyphase code was used as the code of a pilot channel. Tiered polyphase code is a complex number type code, and thus the pilot channel and data channel were separated using the Walsh code which makes the correlation between different codes become 0. The results of the simulation indicated that the correlation characteristics and signal acquisition performance of the proposed signal were identical to those of tiered polyphase code, and that the disadvantage of tiered polyphase code could be supplemented through a data channel in terms of signal tracking.

• Nuclear Engineering and Technology
• /
• v.42 no.6
• /
• pp.636-655
• /
• 2010

A thermal-hydraulic code, named CUPID, has been being developed for the realistic analysis of transient two-phase flows in nuclear reactor components. The CUPID code development was motivated from very practical needs, including the analyses of a downcomer boiling, a two-phase flow mixing in a pool, and a two-phase flow in a direct vessel injection system. The CUPID code adopts a two-fluid, three-field model for two-phase flows, and the governing equations are solved over unstructured grids with a semi-implicit two-step method. This paper presents an overview of the CUPID code development and assessment strategy. It also presents the code couplings with a system code, MARS, and, a three-dimensional reactor kinetics code, MASTER.

• Korean Journal of Weed Science
• /
• v.30 no.3
• /
• pp.308-321
• /
• 2010

To increase of weed researches, abbreviations for Korean weeds name(tentatively named 'KSWS code', the Korean Society Weed Science code) of 433 species belonging to 68 families in arable land were suggested in this paper. The KSWS code was derived from Bayer code or/and modified. The KSWS code was composed of alphabetic 5 characters, namely 3 characters in generic name and 2 characters in specific name. And variable species's KSWS code was 1 characters in generic name and 1 characters in variable name.

• ETRI Journal
• /
• v.33 no.1
• /
• pp.60-70
• /
• 2011

Software is completely exposed to an attacker after it is distributed because reverse engineering is widely known. To protect software, techniques against reverse engineering are necessary. A code encryption scheme is one of the techniques. A code encryption scheme encrypts the binary executable code. Key management is the most important part of the code encryption scheme. However, previous schemes had problems with key management. In an effort to solve these problems in this paper, we survey the previous code encryption schemes and then propose a new code encryption scheme based on an indexed table. Our scheme provides secure and efficient key management for code encryption.

• Journal of Food Hygiene and Safety
• /
• v.20 no.2
• /
• pp.103-113
• /
• 2005

Sanitary codes of retail ffod establishment of Korea, Japan, China, and America were reviewed in order to figure out the differences of the codes. The codes of Korea & Japan are similar in many aspects. The code of America regulates food safety procedures in detail and are easy to interpret. The code of China is broad and not specific in the procedures. Korean code deals with many administration affairs and Japanese code deals with food test and business. Chinese code also deals with administration and standards. American code defines 90 different terms while the codes of rest of the countries define only few terms. For sanitization American code specifies the procedures in specific terms in detail but others do not specify the procedures. For facilities, the American code specifies location, material and procedures but other codes also specify the material but the contents of the codes are not so much specific to compare with American code.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.649-652
• /
• 2004

In this paper, a concatenated RS and Turbo code is proposed for OFDM system over burst error channel. The concatenated code used in this study is a RS(255,2D2) code and a rate 1/2 turbo code. The turbo code uses 2 recursive systematic convolutional (RSC) code as the constituent codes and the parity bit are punctured to get the desired code rate. It is shown by simulation that the conventional OFDM system fails when there exists burst noise. The concatenated RS and turbo code obtains at least 5dB gain over the turbo code at the bit error probability of $10^{-3}$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3C
• /
• pp.195-204
• /
• 2007

The cyclic redundancy check(CRC) code used to decide retransmission request in hybrid automatic repeat request(HRAQ) system can also be used to stop iterative decoding of turbo code if it is used as an error correcting code(ECC) of HARQ system. Thus a scheme to use CRC code for both iteration stop and repeat request in the HARQ system with turbo code based on the standard of cdma 2000 system is proposed in this paper. At first, the optimum CRC code which has the minimum length without performance degradation due to undetected errors is found. And the most appropriate turbo encoder structure is also suggested. As results, it is shown that at least 32-bit CRC code should be used and a turbo code with 3 constituent encoders is considered to be the most appropriate one.

• Journal of Multimedia Information System
• /
• v.4 no.4
• /
• pp.255-262
• /
• 2017

In recent software development, repetitive code fragments (i.e., clones) are common due to the copy-and-paste programming practice, the framework-based development, or the reuse of same design patterns. Such similar code fragments are likely to introduce more bugs but are easily disregarded by a code reviewer or a programmer. In this paper, we present a code review tool to help code reviewers identify important code changes written by other programmers and recommend which changes need to be reviewed first. Specifically, to identify important code changes, our approach detects code clones across revisions and investigates them. Then, to help a code reviewer, our approach ranks the identified changes in accordance with several software quality metrics and statistics on those clones and changes. Furthermore, our approach allows the code reviewer to express their preferences during code review time. As a result, the code reviewer who has little knowledge of a code base can reduce his or her effort by reviewing the most significant changes that require an instant attention. To evaluate our approach, we integrated our approach with a modern IDE (e.g., Eclipse) as a plugin and then analyzed two third-party open source projects. The experimental results indicate that our approach can improve code reviewer's productivity.

• Current Optics and Photonics
• /
• v.3 no.6
• /
• pp.531-540
• /
• 2019

Spectral Amplitude Coding Optical Code Division Multiple Access (SAC OCDMA) is an advanced technique in asynchronous environments. This paper proposes design and implementation of a novel quantum logic gate (QLG) code, with code construction algorithm generated without following any code mapping procedures for SAC system. The proposed code has a unitary matrices property with maximum overlap of one chip for various clients and no overlaps in spectra for the rest of the subscribers. Results indicate that a single algorithm produces the same length increment for codes with weight greater than two and follows the same signal to noise ratio (SNR) and bit error rate (BER) calculations for a higher number of users. This paper further examines the performance of a QLG code based SAC-OCDMA system with NAND and direct detection techniques. BER analysis was carried out for the proposed code and results were compared with existing MDW, RD and GMP codes. We demonstrate that the QLG code based system performs better in terms of cardinality, which is followed by improved BER. Numerical analysis reveals that for error free transmission (10^-9), the suggested code supports approximately 170 users with code weight 4. Our results also conclude that the proposed code provides improvement in the code construction, cross-correlation and minimization of noises.