• Journal of Korean Neurosurgical Society
• /
• v.47 no.1
• /
• pp.36-41
• /
• 2010

Objective: The aim of this study was to investigate the morphological characteristics of the thalamoperforating arteries that arise from the P1 segment of the posterior cerebral artery. Methods: Thalamoperforating arteries located in the interpeduncular fossa were dissected in 26 formalin-fixed human cadaver brains. We investigated the origin site of thalamoperforating arteries from the P1 segment, number and diameter. and variations in their origin. Results: Thalamoperforating arteries arose from the superior, posterior or posterosuperior surfaces of the P1 segment at the mean 1.93 mm (range, 0.41-4.71 mm) distance from the basilar apex and entered the brain through the posterior perforated substance. The average number was 3.6 (range 1-8) and mean diameter was 0.70 mm (range 0.24-1.18 mm). Thalamoperforating arteries could be classified into five different types according to their origin at the P1 segment: Type I (bilateral multiple), 38.5%; Type II (unilateral single, unilateral multiple), 26.9%; Type III (bilateral single), 19.2%; Type IV (unilateral single), 11.5%; Type V (unilateral multiple), 3.8%. In 15.4% of all specimens. thalamoperforating arteries arose from the only one side of P1 segment and were not noted in the other side. In such cases, the branches arising from the one side of P1 segment supplied the opposite side. Conclusion: Variations in the origin of the thalamoperforating arteries should be keep in mind to perform the surgical clipping, endovascular treatment or operation involving the interpeduncular fossa. In particular, unilateral single branch seems to be very risky and significant for surgical technique or endovascular treatment.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.5
• /
• pp.5-12
• /
• 2014

Weatherstrip coatings of urethane and silicon type which are fit to EPDM and thermoplastic materials are used in sealing systems for automotive applications for noise reduction and high slip characteristics for external applications, respectively. Polyurethane binder was successfully synthesized from poly(butyladiphate)diol (PBAD), poly(tetramethylene)glycol (PTMG) and isocyanate as starting materials. Then, polyurethane coating agents were prepared by using various additives. To investigate effects of segment types on the abrasion resistance of polyurethane coating agents, thin films based on polyurethane coating materials were fabricated. With increasing the amount of hard segment in the coating agent, abrasion resistance, modulus and tensile strength of the coating films were improved, but the elongation of the coating films was decreased.

• Proceedings of the KSPS conference
• /
• 2004.05a
• /
• pp.205-208
• /
• 2004

The aim of this study is to analyse the adjustment of the proportion of segment duration in imitating voice. When imitating others' voices, how far is his/her original proportion of segment duration adjusted, and what is this adjustment like under various segments? In this study, I classified segments into consonants and vowels and consonants classified into obstruents and sonorants. The result of the analysis is as follows. ; (1)Individual variation in the proportion of obstruent is not significant, and when imitating, and its distribution is not typicalized. (2) Vowels has individual variation in the proportion of segment duration even under imitating. (3) Nasal has the most distinct individual variation even under imitating, compared with vowel and obstruent. For the further study, I should examine the characteristics of quantitative and qualitative changes in liquid (among sonorant) to find out which segment can best describe personnel characteristics of the proportion of segment duration in imitating voice.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.11
• /
• pp.49-58
• /
• 2010

In this paper, we present a methodology for fast segment restoration under multiple simultaneous link failures in mesh-type MPLS networks. The salient feature of the methodology is that both resilience and QoS constraint conditions have been taken into account for fast segment restoration. For fast restoration, a sufficient condition for testing the existence of backup segments with guaranteed-resilience has been derived for a mesh-type MPLS network. The algorithms for constructing backup segments which can meet both resilience and QoS constraint conditions are then presented with illustrating examples. Finally, simulation has been done to show the efficiency of the proposed segment restoration algorithms.

• Science of Emotion and Sensibility
• /
• v.10 no.2
• /
• pp.147-154
• /
• 2007

Electrocardiogram(ECG) being the recording of the heart's electrical activity provides valuable clinical information about heart's status. Many researches have been pursued for heart disease diagnosis using ECG so far. However, electrocardio-graph uses foreign diagnosis algorithm in the con due to inaccuracy of domestic diagnosis results for a heart disease. This paper proposes ST-segment extraction technique diagnosing heart disease parameter from raw ECG data. As the ST-segment is used for prediction of Coronary Artery Disease, we can predict heart disease using classification approach in data mining technique. We can also predict patient's clinical characterization from patient clinical data.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.4
• /
• pp.13-20
• /
• 2006

A platform diving with categorizing 624C motion was video taped and 3D kinematic variables were analyzed. This motion is consist of 3 parts from the headstand position to the act of turning after take-off. The results indicated that it took a very short time from the moment of take-off to the act of 1/2 turning because the turning motion has already started from preparing motion even before the fingertips have parted from the ground. Also, there was barely any jumping height due to the use of upper limbs segment and there was little difference in the moving distance compared to the standing events judging from horizontal movement of 1.1m. The horizontal velocity of the center of human body was increased before take-off while the vertical velocity was decreased right after take-off and the velocity of lower limbs segment was faster than the upper limbs segment showing contrary results to the standing events. In the aspects of angular velocity, the upper limbs segment starts the turning motion when take-off by rapidly extending its angular velocity while lower limbs segment make large angular velocity even before take-off.

• Journal of the Korean Society for Railway
• /
• v.16 no.2
• /
• pp.117-121
• /
• 2013

Railway line segment deterioration can be affected by rail tracks, subgrades, bridges, tunnels, and line shapes. In this paper, an evaluation method is presented for the railway line segment deterioration using the analytic hierarchy process (AHP) and data envelopment analysis (DEA). The importance weights can be assessed systematically for component facilities from numerous experts using AHP. The importance weights provided by experts may differ according to each expert; however, the DEA enables the evaluation of railway line segment deterioration that reflects the variety of expert opinions using these importance weights.

• Journal of Environmental Impact Assessment
• /
• v.12 no.4
• /
• pp.245-257
• /
• 2003

$SO_2$ concentrations in the Seoul Metropolitan Area (SMA) were predicted by the regional segment ISCST3 modeling. The SMA was segmented by three modeling regions where the weather monitoring station exists since the area of the SMA, approximately $100km{\times}100km$, is too wide to be modeled by one modeling domain. The predicted concentrations by the model were compared with the measured concentrations at 39 air monitoring stations located in the SMA to validate the ISCST3 modeling coupled with the regional segment approach. The predicted concentrations by the regional segment method showed better performance in depicting the measurements than those by the non-segment ISCST3 modeling. The correction methods of the calculated concentrations reviewed were here the correlation method by the first order linear equation and the ratio method of observed to calculated concentrations. The corrected concentrations by two methods showed good agreement with the measured data. The ratio method was, however, easily applicable to the concentration correction in case of a wide modeling region considered in this study.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.2
• /
• pp.173-180
• /
• 2014

In the design of tunnel segment structure, axial and moment forces are considered as significant forces. Since axial force is much greater than moment force, the whole section of segment remains in compression. Therefore crack width can be reduced. But the axial force is not considered in criteria for serviceability check. This fact leads service condition more severe compared to ultimate condition and makes the required steel reinforcement increase to meet the serviceability criteria. In this study, the effect of axial force on serviceability of tunnel segment is evaluated, experimentally and analytically. Mock-up tests on segments with actual size were performed and investigated in terms of initial crack resistance. The evaluation proves that more comprehensive design could be achieved when the axial force is considered in the procedure for the serviceability check in design of tunnel segment.

• Journal of Korean Neurosurgical Society
• /
• v.53 no.1
• /
• pp.26-30
• /
• 2013

Objective : The purpose of this study was to compare the results of three types of short segment screw fixation for thoracolumbar burst fracture accompanying osteopenia. Methods : The records of 70 patients who underwent short segment screw fixation for a thoracolumbar burst fracture accompanying osteopenia (-2.5< mean T score by bone mineral densitometry <-1.0) from January 2005 to January 2008 were reviewed. Patients were divided into three groups based on whether or not bone fusion and bone cement augmentation procedure 1) Group I (n=26) : short segment fixation with posterolateral bone fusion; 2) Group II (n=23) : bone cement augmented short segment fixation with posterolateral bone fusion; 3) Group III (n=21) : bone cement augmented, short segment percutaneous screw fixation without bone fusion. Clinical outcomes were assessed using a visual analogue scale and modified MacNab's criteria. Radiological findings, including kyphotic angle and vertebral height, and procedure-related complications, such as screw loosening or pull-out, were analyzed. Results : No significant difference in radiographic or clinical outcomes was noted between patients managed using the three different techniques at last follow up. However, Group I showed more correction loss of kyphotic deformities and vertebral height loss at final follow-up, and Group I had higher screw loosening and implant failure rates than Group II or III. Conclusion : Bone cement augmented procedure can be an efficient and safe surgical techniques in terms of achieving better outcomes with minimal complications for thoracolumbar burst fracture accompanying osteopenia.