• Journal of Microbiology
• /
• 제40권2호
• /
• pp.125-128
• /
• 2002

The aerobic respiratory chain of Vibrio alginolyticus possesses two different kinds of NADH oxidase systems, i.e., an $Na^{+}$-dependent NADH oxidase system and an $Na^{+}$-independent NADH oxidase system. When deamino-NADH, which is the only substrate for the $Na^{+}$-dependent NADH oxidase system, was used as a substrate, the maximum activities of $N^{+}$-dependent NADH: quinone oxidoreductase and $Na^{+}$-dependent NADH oxidase were obtained at about 0.06 M and 0.2 M NaCl, respectively. When NADH, which is a substrate for both $Na^{+}$-dependent and $Na^{+}$-independent NADH oxidase systems was used as a substrate, the NADH oxidase activity had a pH optimum at about 8.0. In cGntrastl when deamino-NADH was used as a substrate, the NADH oxidase activity had a pH optimum at about 9.0. On the other handle inside-out membrane vesicles prepared from the wild-type bacterium generated only a very small $\Delta$pH by the NADH oxidase system, whereas inside-out membrane vesicles prepared from Napl, which is a mutant defective in the $Na^{+}$ pump, generated $\Delta$pH to a considerable extent by the NADH oxidase system. On the basis of the results\ulcorner it was concluded that the respiratory chain-linked components of V. atginotyticus affect each other.

• Journal of Microbiology and Biotechnology
• /
• 제11권4호
• /
• pp.649-655
• /
• 2001

The kinetics of the thermolysin-catalyzed synthesis of N-(benzyloxycarbonyl)-L-phenylalanyl-L-leucine ethyl ester (Z-Phe-LeuOEt) from N-(benzyloxycarbonyl)-L-phyenylalanine (Z-Phe) and L-leucine ethyl ester (LeuOEt) in an ethyl acetate saturated aqueous system in a batch operation were studied. The kinetics for the synthesis of Z-Phe-LeuOEt were expressed using a rate equation for the rapid equilibrium random bireactant mechanism. The four kinetic constants involved in the rate equation were determined numerically by the quasi-Newton method so as to fit the calculated results with the experimental data. Within the pH and temperature range examined, the $K_{cat}$ value for the synthesis of Z-Phe-LeuOEt reached a maximum at pH 7.0 and $45^{\circ}C$, whereas the affinity between Z-Phe and thermolysin reached a maximum at pH 6.0 adn $40^{\circ}C$. The inhibitory effect of Z-Phe on the condensation reaction decreased as the pH and temperature decreased. In contrast, they affinity between LeuOEt and thermolysin remained unchanged within the pH and temperature range examined. Therefore, it was concluded that the protonation state of the carboxyl groups. of Z-Phe was more imprtant than that of the amono groups of LeuOEt for the synthesis of Z-Phe-LeuOEt in the present solvent system. The equilibrium yield at pH 6.0 and $30^{\circ}C$ was 8% higher than that at pH 7.0 and $40^{\circ}C$, although the rate was much slower. This result suggested that the affinity between the enzyme and the substrate rather than the overall rate was a more important factor affecting the equilibrium yield, when the peptide synthesis was carried out in a product-precipitation system.

• 대한치과보철학회지
• /
• 제42권2호
• /
• pp.210-225
• /
• 2004

Statement of problem: Implant screw loosening has been remained problem in restorative practices. Surface treatment of screw plays a role of preventing screw from loosening in implant screw mechanism. Purpose : The purpose of this study was to investigate surface characteristics of TiN and ZrN film ion plated screw with titanium and gold alloy screw and to evaluate wear resistance, surface roughness, and film adhesion on screw surface using various instruments. Material and methods : GoldTite screws and titanium screws provided by 3i (Implant Innovation, USA) and TorqTite screws or titanium screws by Steri-Oss (Nobel Biocare, USA) and gold screws and titanium screws by AVANA (Osstem Implant, korea) were selected. Ion plating which is much superior to other surface modification techniques was carried out for gold screws and titanium screws using Ti and Zr coating materials with nitrogen gas. Ion nitrided surface of each abutment screw was observed with field emission scanning electron microscopy (FE-SEM, micro-diamond scratch tester, vickers hardness tester, and surface roughness tester. Results : 1) The surface of gold screw and GoldTite is more smooth than ones of other kinds of non coated screw. 2) The ZrN and TiN coated surface is the more smooth than ones of other kinds of screw. 3) The hardness of TiN and ZrN coated surface showed higher than that of non coated surface. 4) The TiN coated titanium screw and ZrN coated gold screw have a good wear resistance and adhesion on the surface. 5) The surface of ZrN coated screw showed low surface roughness compared with the surface of TiN coated screw. Conclusion : It is considered that the TiN and ZrN coated screw which would prevent a screw from loosening can be applicable to implant system and confirmed that TiN and ZrN film act as lubricant on surface of screw due to decrease of friction for recycled tightening and loosening.

• 동의생리병리학회지
• /
• 제24권2호
• /
• pp.197-205
• /
• 2010

The association between five limpness(五軟), five stiffness(五硬), five retardation and disease have been repeatedly shown in patient. However, comparative study has been rare. This study arrange disease, which answer to five limpness, five stiffness, five retardation and classify by epiologic diagnosis. We search for scientific journals, medical college texts, theses of a degree and collect case reports. In this study we found that the five retardation(N=56) is showing numerous more than the others. The five stiffness(N=14) is showing rare than the five limpness(N=29). The five limpness is overlapping more than 90% with five retardation. and the five stiffness is overlapping 80% with five retardation. Symptom of five limpness, five stiffness, five retardation is coming out independent and overlapping each others. And generally it accompanies with abnormality in central nervous system.

• 대기
• /
• 제19권4호
• /
• pp.331-344
• /
• 2009

A sensitivity study has been performed using ARPS (Advanced Regional Prediction System) version 5.2.10 in a downslope windstorm case of 12-13 February 2006. The purpose of this study was to find out the role of the inversion layer of temperature mainly in relation to the strength of the downslope winds over the Yeongdong region located downstream of the Taebaek mountains. Under the conditions of N (Brunt-$V{\ddot{a}}is{\ddot{a}}la$ frequency)=0.008 and N=0.016, the effects of the presence of the inversion layer, its variation of height of the layer, and the depth of the layer were identified. The sensitivity experiments suggested that the inversion layer effected the downstream wind speed of the mountains under both conditions of N=0.008 and N=0.016, and notably when the inversion layer was located near the mountain crest the downstream wind speed of the mountains was strong (~ $27ms^{-1}$) only under the condition of N=0.016. In addition, when the atmosphere was rather stable (N=0.016) and the depth of the layer was relatively thin (765 m) the downstream wind speed of the mountains was the strongest (~ $30ms^{-1}$) among the sensitivity experiments.

• Nuclear Engineering and Technology
• /
• 제47권5호
• /
• pp.534-545
• /
• 2015

In the very high temperature reactor (VHTR), which is a next generation nuclear reactor system, ceramics are used as a fuel coating material and graphite is used as a core structural material. Even if a depressurization accident occurs and the reactor power goes up instantly, the temperature of the core will change only slowly. This is because the thermal capacity of the core is so high. Therefore, the VHTR system can passively remove the decay heat of the core by natural convection and radiation from the surface of the reactor pressure vessel. The objectives of this study are to investigate the heat transfer characteristics of natural convection of a one-side heated vertical channel with inserted porous materials of high porosity and also to develop the passive cooling system for the VHTR. An experiment was carried out using a one-side heated vertical rectangular channel. To obtain the heat transfer and fluid flow characteristics of the vertical channel with inserted porous material, we have also carried out a numerical analysis using a commercial Computational Fluid Dynamics (CFD) code. This paper describes the thermal performances of the one-side heated vertical rectangular channel with an inserted copper wire of high porosity.

• 폴리머
• /
• 제32권3호
• /
• pp.219-229
• /
• 2008

A pH sensitive ternary copolymer gel was synthesized in the presence of ethylene glycol dimethacrylate (EGDMA) as a crosslinking agent through radical polymerization of vinyl acetate (VA), acrylic acid (AA) and methyl acrylate(MA) with a weight ratio of 1 : 1.3 : 1. A number of experiments were carried out to determine the swelling behavior of the gel under a variety of pH conditions of the swelling medium. As the pH of the swelling medium was changed from 1.0 to 8.0 at $37^{\circ}C$, the gel showed a shift in the pH-dependent swelling behavior from Fickian (n=0.3447) to non-Fickian (n=0.9125). The resulting swelling parameters were analyzed using graphical and statistical methods. The results showed that the swelling of the gel was controlled by the pH of the medium, i.e. $n=n_o{\exp}(S_{C}pH)$, where n is the diffusion exponent, $n_o(=28.9645{\times}10^{-2})$ is the pre-exponential factor and $S_C$(=0.1417) is pH sensitivity coefficient. The swelling behavior of the gel was also examined in aliphatic alcohols. The results showed that the rate of swelling increased with increasing number of carbon atoms in the alcoholic molecular chain.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.184-184
• /
• 2012

Recently, InGaN/GaN multi-quantum well grown on GaN pyramid structures have attracted much attention due to their hybrid characteristics of quantum well, quantum wire, and quantum dot. This gives us broad band emission which will be useful for phosphor-free white light emitting diode. On the other hand, by using quantum dot emission on top of the pyramid, site selective single photon source could be realized. However, these structures still have several limitations for the single photon source. For instance, the quantum efficiency of quantum dot emission should be improved further. As detection systems have limited numerical aperture, collection efficiency is also important issue. It has been known that micro-cavities can be utilized to modify the radiative decay rate and to control the radiation pattern of quantum dot. Researchers have also been interested in nano-cavities using localized surface plasmon. Although the plasmonic cavities have small quality factor due to high loss of metal, it could have small mode volume because plasmonic wavelength is much smaller than the wavelength in the dielectric cavities. In this work, we used localized surface plasmon to improve efficiency of InGaN qunatum dot as a single photon emitter. We could easily get the localized surface plasmon mode after deposit the metal thin film because lnGaN/GaN multi quantum well has the pyramidal geometry. With numerical simulation (i.e., Finite Difference Time Domain method), we observed highly enhanced decay rate and modified radiation pattern. To confirm these localized surface plasmon effect experimentally, we deposited metal thin films on InGaN/GaN pyramid structures using e-beam deposition. Then, photoluminescence and time-resolved photoluminescence were carried out to measure the improvement of radiative decay rate (Purcell factor). By carrying out cathodoluminescence (CL) experiments, spatial-resolved CL images could also be obtained. As we mentioned before, collection efficiency is also important issue to make an efficient single photon emitter. To confirm the radiation pattern of quantum dot, Fourier optics system was used to capture the angular property of emission. We believe that highly focused localized surface plasmon around site-selective InGaN quantum dot could be a feasible single photon emitter.

• Management Science and Financial Engineering
• /
• 제7권2호
• /
• pp.73-90
• /
• 2001

This paper presents the reliability models for redundant systems composed of repairable components whose failure time and repair time distributions are phase-type. It is shown that the distribution of time to system failure is also phase-type. The dependency between components are considered and integrated into the model by the used of the rate adjustment factor. The phase-type representation is constructed for the system through algebraic operations on the parameters of components\` failure time and repair time distributions and the corresponding rate adjustment factors. Types of system structures considered are parallel, k-out-of-N system with load sharing scheme and standby system with operation priority.

• 한국진공학회지
• /
• 제6권S1호
• /
• pp.122-126
• /
• 1997

the Cu/polyimide system is known to be the best candidate for a multilevel interconnection system due to the low resistance of Cu and to the low dielectric constant of polyimide respectively. Ion beam mixing of Cu(40nm)/polyimide was carried out at room temperature with 80 keV Ar+ and N2+ form $1.5\times$1015 to 15$\times$1015 ions/cm2. The quantitative adhesion strength was measured by a standard scratch test. X-ray photoelectron spectroscopy and x-ray emission spectrocopy are employed to investigate the chemical bonds and the interlayer compound formation of the films Cu/Al/polyimide showed more adhesion strength than Cu/polyimide after ion beam mixing and N2+ ions are more effective in the adhesion enhancement than Ar+ with the same sample geometry. The XES results shows the formation of interlayer compound of CuAl2O4 which can reflect more adhesive Cu/Al/polyimide which has not been reported previously. The latter results is understood by the fact that N2+ ions produce more pyridinelike moiety, amide group and tertiary amine moiety whcih are known as adhesion promotors.