• Journal of Animal Science and Technology
• /
• v.45 no.3
• /
• pp.387-396
• /
• 2003

This experiment was carried out to compare the effects of feeding commercial formula feed and rice straw separately (control) versus a total mixed ration (TMR) on productivity of Hanwoo steers in late stage of fattening and on ruminal fermentation characteristics and digestibilities. Ruminal digesta from the cannulated cattle were sampled at 0, 1, 2, 3, 5, 8 hour after feeding. The steers fed TMR consumed 7.4kg per day and there was no difference between feeding systems. Daily weight gain was not significantly (P>0.05) between feeding systems, however, TMR group showed lower daily gain than control group. The amount of feed consumption per kg weight gain was higher in TMR group than control group (10.5kg and 9.7kg, respectively), resulting in a greater efficiency of feed utilization for gain. In the result of appearance rates of quality grade A were 33% higher for TMR group than those in control group. Appearance rates of grade 1 showed 56% and 75% when fed the control and TMR, respectively. Digestibilities of dry matter, crude protein, crude fiber and gross energy for TMR treatment were significantly higher (P<0.01) than those of control. Prior to feeding (0 h) and each subsequent hour, the TMR resulted in higher rumen pH (P<0.05) when compared with control ration. The concentration of NH3-N for TMR treatment maintained at higher level up to 8hr after feeding, especially increased up to 28.2mg/$d\ell$ during 1-2 hour which was two times (P<0.05) more than control. The amount of total VFA showed same trends between feeding systems. However, the ratios of branched chained fatty acid such as iso-butyric acid and iso-valeric acid for TMR treatment were significantly(P<0.01) higher than control for 3-5hr. Results showed that TMR in these trials is effective feeding system for fattening Hanwoo steers in the respect of ruminal characteristics, total tract digestibility and productivities.

• Animal cells and systems
• /
• v.13 no.3
• /
• pp.331-337
• /
• 2009

Twenty-eight Anopheles species has been so-far identified in Iran, while only 8 species was proved as malaria vector. In this study, we principally examined the cuticular hydrocarbon (CHC) potency in identification of Iranian vectors of malaria and then differentiation of vector and non-vector species of Anopheles. Seven species of malaria vectors and the non-vector species, Anopheles claviger were collected throughout Iran. Female extracts were made out of every five conspecific specimens by surface immersion in pure n-hexane. Each sample was injected into a FID-GC instrument along with the known concentrations of standards. CHC profiles of the eight Anopheles species indicated no qualitative difference. The average mass of each eluted CHC were compared using Repeated ANOVA and Mann-Whitney tests. Results confirmed a significant difference in mass of each single CHC at a specific retention time (RT). Statistical comparison of CHC mass in An. sacharovi, An. stephensi, An. culicifacies and An. fluviatilis at RT 39.6 indicated significant differences (P<0.05) among these species. Analysis of CHC mass of An. dthali, An. superpictus & An. sacharovi at RT 28.5, An. stephensi & An. sacharovi at RT 30.7 and An. sacharovi & An. claviger at RT 30.6 similarly indicated significant differences (P<0.05). An. sacharovi could be distinguished from other species, which showed only trace, by integratable peaks at retention times of 29.7, 31 and 32.6. Similarly, An. claviger could be distinguished from the other species with a trace peak at RT 30.6. In order to separate An. stephensi from the five other species, the integratable peak at RT 30.7 was used. An. dthali could be identified at RT 26.2 by an integratable peak v.s. the trace peaks of other species. An. superpictus had indicator peaks at RTs 27.4 & 28.5 v.s. trace peaks of other species. An. maculipennis with its trace peak at RT 39.6 could be easily differentiated from An. fluviatilis & An. culicifacies. This study proved that all of the examined species of Anopheles could be well identified based on their quantitative differences in CHCs, except for An. fluviatilis & An. culicifacies for which no CHC indicator peak was detected.

• Journal of Korean Medical classics
• /
• v.25 no.4
• /
• pp.39-55
• /
• 2012

Objective : In order to find the decision system in differentiation of syndromes and treatments, I paid attention to divination by Achillea sibireca. Method : I pulled out the elements of differentiation of syndromes and treatments in Zh$\bar{o}$ng y$\bar{i}$n$\grave{e}$i k$\bar{e}$ xu$\acute{e}$(中醫內科學), Uihagipmun Sanghan(醫學入門 傷寒), Donguibogam Japbyeong(東醫寶鑑 雜病) and compared them with the horoscope in The Book of Changes(周易) from the relativity of both eight principles(八綱) etc and subdivision in the entity of the cosmos (太極內 分化). Result : From this viewpoint, the decision system that has relative references in differentiation of syndromes & treatments on cold diseases(傷寒病) and complexed diseases(雜病) by eight principles etc can be compared with the decision system in divination by Achillea sibireca that the entity of the cosmos(太極) gradually can be breakdown into the positive and negative(陰陽), the positive and negative can be breakdown into four phases(四象), four phases can be breakdown into eight signs of divination(八卦), eight signs of divination can be breakdown into 64 divination signs(64卦). Conclusion : I had found that differentiation of syndromes and treatments and divination by Achillea sibireca have similarity to each other in side of decision system. Those decision systems for clinical use and telling the future has many relative references and are made of multiple structures. Clinician can easily, exactly distinguish similar syndromes of many another diseases through this way.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.12
• /
• pp.1539-1547
• /
• 1999

캐리-세이브 가산기 (CSA)는 회로 설계 과정에서 빠른 연산 수행을 위해 가장 널리 이용되는 연산기 중의 하나이다. 그러나, 현재까지 산업체에서 CSA를 이용한 설계는 설계자의 경험에 따른 수작업에 의존하고 있고 그 결과 최적의 회로를 만들기 위해 매우 많은 시간과 노력이 소비되고 있다. 이에 따라 최근 CSA를 기초로 하는 회로 합성 자동화 기법에 대한 연구의 필요성이 대두되고 있는 상황에서, 본 논문은 연산 속도를 최적화하는 효율적인 CSA 할당 알고리즘을 제안한다. 우리는 CSA 할당 문제를 2단계로 접근한다: (1) 연산식의 멀티 비트 입력들만을 고려하여 최소 수행 속도 (optimal-delay)의 CSA 트리를 할당한다; (2) (1)에서 구한 CSA 트리의 수행 속도 증가가 최소화 (minimal increase of delay) 되는 방향으로 CSA들의 캐리 입력 포트들에 나머지 싱글 비트 입력들을 배정한다. 실제 실험에서 우리의 제안된 알고리즘을 적용하여 연산식들의 회로 속도를 회로 면적의 증가 없이 상당한 수준까지 줄일 수 있었다.Abstract Carry-save-adder (CSA) is one of the most widely used implementations for fast arithmetics in industry. However, optimizing arithmetic circuits using CSAs is mostly carried out by the designer manually based on his/her design experience, which is a very time-consuming and error-prone task. To overcome this limitation, in this paper we propose an effective synthesis algorithm for solving the problem of finding an allocation of CSAs with a minimal timing for an arithmetic expression. Specifically, we propose a two step approach: (1) allocating a delay-optimal CSA tree for the multi-bit inputs of the arithmetic expression and (2) determining the assignment of the single-bit inputs to carry inputs of the CSAs which leads to a minimal increase of delay of the CSA tree obtained in step (1). For a number of arithmetic expressions, we found that our approach is very effective, reducing the timing of the circuits significantly without increasing the circuit area.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.7
• /
• pp.847-862
• /
• 1999

본 논문에서는 유한버퍼의(finite-buffered) 동기화된(synchronous) 큐잉모델(queueing model)을 이용하여 명령어들간의 병렬성, 분기명령의 빈도수, 분기예측(branch prediction)의 정확도, 캐쉬미스 등의 파라미터들을 고려하여 프로세서의 명령어 실행율을 예측하며 캐쉬의 성능과 파이프라인 성능간의 관계를 분석할 수 있는 새로운 해석적 모델을 제안하였다. 해석적 모델은 모델의 타당성을 검증하기 위해서 시뮬레이션을 수행하여 얻은 결과와 비교하였다. 해석적 모델과 시뮬레이션을 비교한 결과 대부분 10% 오차 내에서 일치하였다. 본 연구를 통하여 얻은 해석적 모델을 사용하면 시뮬레이션에서는 드러나지 않는 성능제약의 원인에 대한 명확한 규명이 가능하기 때문에 성능향상을 위한 설계자료를 얻을 수 있으며, 시스템 성능 밸런스를 위한 캐쉬와 비순차이슈 파이프라인 성능간의 관계에 대한 정확한 분석이 가능하다.Abstract This research presents a novel analytic model to predict the instruction execution rate of superscalar processors using the queuing model with finite-buffer size and synchronous operation mode. The proposed model is also able to analyze the performance relationship between cache and pipeline. The proposed model takes into account various kinds of architectural parameters such as instruction-level parallelism, branch probability, the accuracy of branch prediction, cache miss, and etc.. To prove the correctness of the model, we performed extensive simulations and compared the results with the analytic model. Simulation results showed that the proposed model can estimate the average execution rate accurately within 10% error compared to simulation results. The proposed model can explain the causes of performance bottleneck which cannot be uncovered by the simulation method only. The model is also able to show the effect of the cache miss on the performance of out-of-order issue superscalar processors, which can provide an valuable information in designing a balanced system.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.10
• /
• pp.1206-1216
• /
• 1999

이동 호스트란 시간과 공간의 제약 없이 필요한 기능을 수행하고, 또한 원하는 정보에 접근할 수 있는 휴대용 컴퓨터를 일컫는다. 이동 컴퓨팅 환경이란 이러한 이동 호스트들을 지원할 수 있도록 구성된 분산 환경이다. 따라서 이동 컴퓨팅 환경에서의 분산 알고리즘은 정적 호스트만을 고려한 기존의 분산 환경에서와는 다르게 이동 호스트의 여러 가지 특성들을 고려하여 제안되어야 한다. 즉, 이동 컴퓨팅 환경의 도래로 인하여 이동성과 휴대성, 그리고 무선 통신과 같은 특성들을 고려한 새로운 분산 상호 배제 알고리즘이 필요하다. 이제까지 이동 컴퓨팅 환경에서의 상호 배제 알고리즘은 토큰 링 구조에 기반을 두고 설계되었다. 토큰 링 구조는 이동 호스트들의 위치를 유지하기 위하여 높은 비용을 필요로 하는 단점을 가지고 있다. 본 논문에서는 균형 높이 트리(height-balanced tree)라는 새로운 모형을 제안함으로써 정적 분산 환경과 이동 분산 환경이 혼합된 환경에서 상호 배제 비용을 감소시킬 수 있는 새로운 알고리즘을 제안하며, 각 경우에 있어서의 비용을 산출하고 평가한다.Abstract The mobile host is a potable computer that carries out necessary functions and has the ability to access desirable informations without any constraints in time and space. Mobile computing environment is a distributed environment that is organized to support such mobile hosts. In that environment, distributed algorithms of which environment not only with static hosts but with mobile host's several properties should be proposed. With the emergence of mobile computing environments, a new distributed mutual exclusion method should be required to consider properties mobile computing system such as mobility, portability, and wireless communication. Until now, distributed mutual exclusion methods for mobile computing environments are designed based on a token ring structure, which have the drawbacks of requiring high costs in order to locate mobile hosts. In this paper, we propose a distributed mutual exclusion method that can reduce such costs by structuring the entire system as a height-balanced tree for static distributed networks and for networks with mobile hosts. We evaluated the operation costs in each case.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.5
• /
• pp.705-715
• /
• 2010

The adoption of carbon foot print system is being activated mostly in the developed countries as one of the long-term response towards tightened up regulations and standards on carbon emission in the agricultural sector. The Korean Ministry of Environment excluded the primary agricultural products from the carbon foot print system due to lack of LCI (life cycle inventory) database in agriculture. Therefore, the research on and establishment of LCI database in the agriculture for adoption of carbon foot print system is urgent. Development of LCA (life cycle assessment) methodology for application of LCA to agricultural environment in Korea is also very important. Application of LCA methodology to agricultural environment in Korea is an early stage. Therefore, this study was carried out to find out the effect of lettuce cultivation on agricultural environment by establishing LCA methodology. Data collection of agricultural input and output for establishing LCI was carried out by collecting statistical data and documents on income from agro and livestock products prepared by RDA. LCA methodology for agriculture was reviewed by investigating LCA methodology and LCA applications of foreign countries. Results based on 1 kg of lettuce production showed that inputs including N, P, organic fertilizers, compound fertilizers and crop protectants were the main sources of major emission factor during lettuce cropping process. The amount of inputs considering the amount of active ingredients was required to estimate the actual quantity of the inputs used. Major emissions due to agricultural activities were $N_2O$ (emission to air) and ${NO_3}^-$/${PO_4}^-$ (emission to water) from fertilizers, organic compounds from pesticides and air pollutants from fossil fuel combustion in using agricultural machines. The softwares for LCIA (life cycle impact assessment) and LCA used in Korea are 'PASS' and 'TOTAL' which have been developed by the Ministry of Knowledge Economy and the Ministry of Environment. However, the models used for the softwares are the ones developed in foreign countries. In the future, development of models and optimization of factors for characterization, normalization and weighting suitable to Korean agricultural environment need to be done for more precise LCA analysis in the agricultural area.

• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.2
• /
• pp.98-104
• /
• 2001

Cultivation area of the plastic film-house has been continuously increased with the increase of consumers' income. Intensive land use without fallowing or crop rotation caused severe problem such as salt accumulation in soils and in turn retarded growth and low productivity. This study was carried out to solve them derived from longterm intensive farming practices. Seven farmers who are practicing plastic film-house cultivation were recommended for case study by municipal government and selected for their excellency of cultivation and soil management. The cultivation periods of these systems were in the range of 5 to 40 years in the regions mainly located in alluvial soil cultivated with cucumber, tomato and red pepper. The soils texture of the excellent farmers' fields were silt loam or sandy loam, ranged from 7 to 15 percents of clay contents. Soil bulk density, depth of plowing layer and soil aggregates contents of the farmers' soils were 0.89, 23.1 cm, 61.6% whereas those in neighboring soils were 1.10, 17.8 cm, 54.2 %, respectively. And pH, OM and $NO_3-N$ of the farmers' soils also were better than those of neighboring soils. There was no difference in population densities of nematode between the good farmers' and neighboring soils, but actinomyces and Fusarium densities of recommended farmers' soils were better than neighboring soils. The major farming practices by the good farmers were characterized by deep plowing with flooding, amendment of crude organic matter, and reduction of chemical fertilizer application before transplanting, and also drip irrigation and liquid manure application after planting. They also conducted solar sterilization with or without flooding, removal of plastic films during rainy days and culturing rice or corn as rotation crops to avoid the problems mentioned above.

• Journal of Conservation Science
• /
• v.9 no.1
• /
• pp.21-32
• /
• 2000

Rock composition of the Hwangsang-dong Granite Standing Sculptured Buddha (Treasure No. 1122) in the Kumi City is biotite-hornblende granodiorite which consists of about 30 pieces of individual rock blocks of same compositions. However, the cap rocks is pebble-bearing coarse sandstone. Rock blocks of the Standing Buddha and surrounding out crops occur well developed several joint systems of $N25^{\circ}$ to $45^{\circ}W$ strike and nearly vertical (70 to $85^{\circ}SE$) dipping. Rock blocks of the Standing Buddha showed vertical, horizontal and oblique joints, and those blocks are well supported by individual blocks. However, the junction part of the blocks are under dangerous situation due 10 seriously mechanical and chemical weathering. Host rock of the Standing Buddha belongs to the HW grade, therefore mostly rock-forming minerals of the granodiorite Standing Buddha altered with clay and iron hydroxide minerals by mineralogical and chemical weathering. Near surface of the Standing Buddha show spore and mycelium of green algaes, and a joint plane alive with weeds. We suggest that if structural stability for the Standing Buddha remove essentially a unstable rock blocks from the main body, and the main body necessitate supporting by rock bolting method because of repeated unstability and minimizing stress to the rock blocks. For the opened joint planes, fractured surface and alive weeds will attempt to fill in a petro-epoxy, petro-filler and biochemical treatments for the algaes, and ground water curtain and wall seems to be necessary for water flow and diminishing humidity of the Standing Buddha.

• Applied Chemistry for Engineering
• /
• v.3 no.1
• /
• pp.130-137
• /
• 1992

The Graft copolymerization of acrylonitrile(AN) and styrene(ST) onto chloroprene rubber(CR) were carried out with benzoyl peroxide(BPO) as an initiator. The synthesized graft copolymer(ACS) was separated from polymeric mixture by the extraction with ethyl acetate and n-hexane, acetone and methanol, dimethylformamide(DMF) and methanol mixed solvent systems. The graft copolymer obtained, acrylonitrile-chloroprene-styrene(ACS) was identified by IR spectrophotometer. The effect of mole ratio of styrene to acrylonitrile, reaction time and temperature, initiator concentration, CR content and solvents on graft copolymerization were examined. It was observed that the grafting efficiency increased with [ST]/[AN] mole ratio and reaction time. The grafting efficiency increased with increasing initiator concentration and CR content. The maximum grafting efficiency was obtained when the mole ratio of [ST]/[AN] was 1.5 and reaction was made at 40hrs, and $70^{\circ}C$ using chloroform/toluene mixed solvent. The thermal properties, light resistance and flammability of ACS were compared with those of ABS and AES. It was found that flame retardancy of related polymers increased in the order ACS>ABS>AES. The thermal stability of ACS was greatly improved when compared with ABS or AES. Morphology of ACS was also investigated by using a transmisson electron microscope(TEM).