• 제목/요약/키워드: k-out of-n systems

검색결과 346건 처리시간 0.029초

연속회분식반응조에서 유기물 부하와 질산염농도에 따른 생물학적 질소 및 인 제거 특성 (Biological Nitrogen and Phosphorus Removal Characteristics on Organic Material and Nitrate Loadings in SBR Process)

  • 김이태;이희자;김광수;배우근
    • 한국물환경학회지
    • /
    • 제20권6호
    • /
    • pp.571-576
    • /
    • 2004
  • Since anaerobic/anoxic/oxic process, which is a typical mainstream biological nitrogen and phosphorus removal process, utilizes influent organic matter as an external carbon source for phosphorus release in anaerobic or anoxic stage, influent COD/T-P ratio gives a strong influence on performance of phosphorus removal process. In this study, a bench scale experiment was carried out for SBR process to investigate nitrogen and phosphorus removal at various influent COD/T-P ratio and nitrate loadings of 23~73 and 1.6~14.3g $NO_3{^-}-N/kg$ MLSS, respectively. The phosphorus release and excess uptake in anoxic condition were very active at influent COD/T-P ratios of 44 and 73. However, its release and uptake was not obviously observed at COD/T-P ratio of 23. Consequently, phosphorus removal efficiency was decreased. In addition, the phosphorus release and uptake rate in anoxic condition increased as the nitrate loading decreased. Specific denitrification rate had significantly high correlation with organic materials and nitrate loadings of the anoxic phase too. The rate of phosphorus release and uptake in the anoxic condition were $0.08{\sim}0.94kg\;S-P/kg\;MLSS{\cdot}d$ and $0.012{\sim}0.1kg\;S-P/kg\;MLSS{\cdot}d$, respectively.

축분을 이용한 활성탄소 제조와 이의 악취 흡착성 분석 (Manufacture of Activated Carbon Using Livestock Manure and it's Odor Absorptiveness)

  • 최희철;송준익;권두중;곽정훈;양창범;유용희;박영태;박경섭;박동금;김용국
    • 한국축산시설환경학회지
    • /
    • 제13권3호
    • /
    • pp.211-218
    • /
    • 2007
  • 본 시험은 축분을 이용한 활성탄소를 제조하는 기술을 개발하고 이의 활용방안을 연구하여 축분의 처리방법을 다변화하고 제조된 활성탄소의 토양개량재, 악취흡착재 등 농업적 이용을 모색하기 위하여 악취제거시험 등을 수행하였으며 그 결과는 다음과 같다. 1. 가축분을 건조, 펠렛화 과정을 거친 후 $400^{\circ}C$에서 1시간 탄화처리하고 $750^{\circ}C$에서 1시간 활성화처리시 활성탄소가 제조되었다. 2. 축분의 회분 함량은 돈분퇴비가 11.9%로 낮았으나 계분퇴비 29.8%, 젖소깔짚 40.7%로 높았다. 휘발성물질은 젖소깔짚 11.6%, 계분퇴비 18.8%, 계분 31.0%, 돈분퇴비 22.3% 이었으나 육계깔짚은 49.8%로 높았다. 3. 축분활성탄소의 비표면적은 계분퇴비 259.8, 계분 209.8, 돈분퇴비 442.3, 젖소깔짚 $812.9\;m^2/g$으로 야자각 활성탄소 $1,040\;m^2/g$ 보다 낮았으며 미세기공의 크기는 육계깔짚 $5.02\;{\AA}$으로서 큰 반면 젖소깔짚은 $0.39\;{\AA}$으로 야자각 활성탄소와 비슷하였다. 4. 축분활성탄소의 요오드 흡착능력은 $530{\sim}580mg/g$으로 야자각 활성탄소의 1,000 mg/g 보다 낮았다. 5. 암모니아가스의 흡착율은 계분이나 계분퇴비로 만든 활성탄소가 가장 낮았으며 젖소깔짚 활성탄소가 가장 높았으며 계분퇴비 활성탄소는 20분 경에 흡착 포화에 도달하는 반면 젖소깔짚 활성탄소는 40분이 되어서 흡착 포화에 도달하였다. 6. 황화수소의 경우 휘발성물질이 비교적 많은 육계깔짚, 계분퇴비, 산란계분 등으로 만든 활성탄소에서 흡착율이 낮았으며 젖소깔짚 활성탄소에서 높았다.

  • PDF

집단지성의 품질, 그 결정요인, 유용성의 관계: 수용자 관점에서 한국의 위키서비스와 Q&A 서비스의 비교 (Relationships between Collective Intelligence Quality, Its Determinants, and Usefulness: A Comparative Study between Wiki Service and Q&A Service in Perspective of Korean Users)

  • 주재훈;이스마틸라 노르마토프
    • Asia pacific journal of information systems
    • /
    • 제22권4호
    • /
    • pp.75-99
    • /
    • 2012
  • Innovation can come from inside or outside organizations. Recently, organizations have begun turning to external knowledge more often, through various forms of collective intelligence (CI) as collaborative platform to solve complex problems. Several factors facilitate this CI utilization phenomenon. First, with the rapid development of Internet and social media, numerous web applications have become available to millions of the Internet users over the past few decades. Web 2.0 and social media have become innovative web applications that provide an environment for human social interaction and collaboration. Second, the diffusion of simple and easy-to-use technologies that enable users to interact and design web applications without programming skills have led to vast, previously unknown amounts of user-generated content. Finally, the Internet has enabled communities to connect and collaborate, creating a virtual world of CI. In this study, web enabled CI is defined as a composed ability of individuals who are acting as a single cognitive unit to achieve common goals, think reasonably, solve problems, make decisions, carry out complex tasks, and develop creative ideas collectively through participation and collaboration on the web. Although CI plays a critical role in organizational innovation and collaboration, the dubious quality of CI is still problem that is difficult to solve. In general, the quality level of content collected from the crowd is lower than that from professionals. Thus, it is important to identify determinants of CI quality and to analyze the relationship between CI quality and its usefulness. However, there is a lack of empirical study on the quality factors of web-enabled CI. There exist a variety of web enabled CI sites such as Threadless, iStockphoto or InnoCentive, Wikipedia, and Youtube. One of the most successful forms of web-enabled CI is the Wikipedia online encyclopedia, accessible all over the world. Another one example is Naver KnowledgeiN, a typical and popular CI site offering question and answer (Q&A) services. It is necessary to study whether or not different types of CI have a different effect on CI quality and its usefulness. Thus, the purpose of this paper is to answer to following research questions: ${\bullet}$ What determinants are important to CI quality? ${\bullet}$ What is the relationship between CI quality factors and the usefulness of web-enabled CI? ${\bullet}$ Does CI type have a moderating effect on the relationship between CI quality, its determinants, and CI usefulness? Online survey using Google Docs with email and Kakao Talk was conducted for collecting data from Wikipedia and Naver KnowledgeiN users. A totoal of 490 valid responses were collected, where users of Wikipedia were 220 while users of Naver KnowledgeiN were 270. Expertise of contributors, community size, and diversity of contributors were identified as core determinants of perceived CI quality. Perceived CI quality has significantly influenced perceived CI usefulness from a user's perspective. For improving CI quality, it is believed that organizations should ensure proper crowd size, facilitate CI contributors' diversity and attract as many expert contributors as possible. Hypotheses that CI type plays a role of moderator were partially supported. First, the relationship between expertise of contributors and perceived CI quality was different according to CI type. The expertise of contributors played a more important role in CI quality in the case of Q&A services such as Knowledge iN compared to wiki services such as Wikipedia. This implies that Q&A service requires more expertise and experiences in particular areas rather than the case of Wiki service to improve service quality. Second, the relationship between community size and perceived CI quality was different according to CI type. The community size has a greater effect on CI quality in case of Wiki service than that of Q&A service. The number of contributors in Wikipeda is important because Wiki is an encyclopedia service which is edited and revised repeatedly from many contributors while the answer given in Naver Knowledge iN can not be corrected by others. Finally, CI quality has a greater effect on its usefulness in case of Wiki service rather than Q&A service. In this paper, we suggested implications for practitioners and theorists. Organizations offering services based on collective intelligence try to improve expertise of contributeros, to increase the number of contributors, and to facilitate participation of various contributors.

  • PDF

Evaluation of marginal fidelity of copy-milled and CAD/CAM all ceramic crowns

  • Jeong Seung-Mi;Kang Dong-Wan;Wolf Christoph
    • 대한치과보철학회지
    • /
    • 제39권3호
    • /
    • pp.243-249
    • /
    • 2001
  • Statement of the problem. The interest in all-ceramic restorations has increased as more techniques have become available. With the introduction of machinable dental ceramics and CAD/CAM systems or Copy-milling systems there is a need for evaluating the quality levels of these new fabrication techniques. Purpose. This study was to evaluate the fitting accuracy of machined all-ceramic crowns made out of an industrially prefabricated feldspathic porcelain. Material and Methods. Three master models with different cutting depth (0.8mm/1.0mm/1.2mm)were produced using a palladium-silver alloy. A total of 36 working dies, 12 of each form, was used for the modellation of prototype resin copings and 36 additional crowns, 12 of each cutting depth, were produced by using the $CEREC^{(R)}2$ system for all crowns. The maginal fit of all 72 crowns was then evaluated on their respective master die at 54 circularly staggered points of measurement per crown under a fixation pressure of 30 N by using a computerized video image system. Results. The medians of the copy-milled $CELAY^{(R)}$ crowns ranged from 29 to $36{\mu}m$. The highest value for the marginal gap was found in group B (cutting depth 1.0mm) at $107{\mu}m$. The median for the $CEREC^{(R)}2$ crowns was found between 43.5 and $70{\mu}m$. The maximum values for all three groups ranged from $181{\mu}m$ to $286{\mu}m$. With $286{\mu}m$ the highest value for marginal gap was found in group C. the Kruskal-Wallis test and multiple comparisons analysis procedure revealed a significant influence of the production technique on the marginal fit in all three groups (p<0,02). Conclusion. 1. The $CELAY^{(R)}$ system is capable to produce all-ceramic crowns with a significantly better marginal fit than the $CEREC^{(R)}2$ system. 2. As far as premolar crowns produced with the $CEREC^{(R)}2$ system are concerned, the cutting depth has a significant influence on fitting accuracy. 3. The production of crowns with an acceptable marginal fit is possible with both systems. However, adhesive luting is recommended for milled feldspathic porcelain crowns.

  • PDF

Space Group $R\={3}c$(167)과 Tris(1,2,3,4-tetraphenylbuta-1,3-dienyl)cyclotriphosphazene의 結晶構造 (Space Group $R\={3}c$ = $R\={3}2/c$(167) and the Crystal Structure of Tris(1,2,3,4-tetraphenylbuta-1,3-dienyl)cyclotriphosphazene)

  • 김영상;고재중;강상욱;이영주;강유진;한원식;박영수;서일환
    • 한국결정학회지
    • /
    • 제15권1호
    • /
    • pp.9-17
    • /
    • 2004
  • Trigonal system에 屬한 25個 space group들 中 18個는 hexagonal axes만을 나타내는 lattice letter p로 表示되고, 나머지 7個의 rhombohedral space groups R3(146), $R\={3}$(148), R32(155), R3m(160), R3c(161), $R\={3}m$(166), $R\={3}c$(167)은 첫째 3개의 lattice points (0, 0, 0), (2/3, 1/3, 1/3), (1/3, 2/3, 2/3)를 갖는 hexagonal cell in obverse setting과 둘째 primitive rhombohedral cell의 두 가지로 表示된다. 本 論文에서는 space group $R\={3}c$(167)에 대하여 論한 後 이 space group에 屬한 化合物인 tris(1,2,3,4-tetraphenylbuta-1,3-dienyl)cyclotriphosphazene, $C_{84}H_{60}N_3P_3$의 構造를 hexagonal 및 rhombohedral cell 의 양쪽으로 糾明하여 發表하였다.

산성 Fe-ZSM5 담체에 담지된 귀금속 촉매를 활용한 암모니아의 선택적 산화반응 (Selective Catalytic Oxidation of Ammonia over Noble Catalysts Supported on Acidic Fe-ZSM5 Supports)

  • 김민성;이대원;이관영
    • 청정기술
    • /
    • 제18권1호
    • /
    • pp.89-94
    • /
    • 2012
  • 본 연구에서는 산성을 갖는 Fe-ZSM5를 담체로 활용하여 Pd, Pt 등 귀금속을 담지한 후, 제조 촉매의 암모니아의 선택적 산화반응 활성을 평가하였다. 이들 중 Pt/Fe-ZSM5가 Pd/Fe-ZSM5 보다 높은 활성을 나타냈다. 또한 Pt/Fe-ZSM5 촉매에서 ZSM5 구조체 내 Fe의 이온교환량을 달리한 촉매의 실험을 수행하여, 암모니아의 선택적 산화반응에 가장 우수한 활성을 보이는 최적 조성비를 탐색하였다. 그 결과, Fe의 이온교환량이 적을수록 반응 활성이 증가하는 경향을 보였고, 저온 영역인 $250^{\circ}C$에서 100%의 암모니아 전환율을 나타냈다. 이와 같이 암모니아의 선택적 산화반응에 효과적인 Fe-ZSM5 담체에 대하여, ICP-AES, BET, XRD, $NH_3$-TPD 등과 같은 특성 분석을 수행하여 제조 촉매의 구조와 물성이 반응활성에 미치는 영향을 검토해보았다.

Word Embedding 자질을 이용한 한국어 개체명 인식 및 분류 (Korean Named Entity Recognition and Classification using Word Embedding Features)

  • 최윤수;차정원
    • 정보과학회 논문지
    • /
    • 제43권6호
    • /
    • pp.678-685
    • /
    • 2016
  • 한국어 개체명 인식에 다양한 연구가 있었지만, 영어 개체명 인식에 비해 자질이 부족한 문제를 가지고 있다. 본 논문에서는 한국어 개체명 인식의 자질 부족 문제를 해결하기 위해 word embedding 자질을 개체명 인식에 사용하는 방법을 제안한다. CBOW(Continuous Bag-of-Words) 모델을 이용하여 word vector를 생성하고, word vector로부터 K-means 알고리즘을 이용하여 군집 정보를 생성한다. word vector와 군집 정보를 word embedding 자질로써 CRFs(Conditional Random Fields)에 사용한다. 실험 결과 TV 도메인과 Sports 도메인, IT 도메인에서 기본 시스템보다 각각 1.17%, 0.61%, 1.19% 성능이 향상되었다. 또한 제안 방법이 다른 개체명 인식 및 분류 시스템보다 성능이 향상되는 것을 보여 그 효용성을 입증했다.

Studies on Feed Intake and Nutrient Utilization of Sheep under Two Housing Systems in a Semi-arid Region of India

  • Bhatta, Raghavendra;Swain, N.;Verma, D.L.;Singh, N.P.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제17권6호
    • /
    • pp.814-819
    • /
    • 2004
  • An investigation was carried out to study the effect of two housing systems on feed intake and nutrient utilization of sheep in a semi-arid region of India. Two types of housing managements were adopted. The first was a shed- 20'${\times}$10' structure with all the four sides of 6' chain link fencing with central height of 10'. The roof was covered with asbestos sheets, with mud floorings. The second was an open corral- 20'${\times}$10' open space with all the four sides covered with 6' chain link fencing. Thirty-four (32 ewes and 2 rams) sheep were grazed together on a 35 ha plot of native range. All the sheep were grazed as a flock from 08:00 to 17:00 h during the yearlong study. The flock was divided into two groups (16 ewes+1 ram) in the evening and housed according to two housing systems (Shed and Open Corral). Three digestion trials were conducted during three defined seasons of monsoon, winter and summer seasons to determine the effect of housing on nutrient intake and utilization. Blood samples were collected in three seasons for the estimation of hemoglobin and glucose. Dry and wet bulb temperatures were recorded at 06:00 A.M. and 09:00 P.M. using suitable thermometers both inside the shed and in the open corral and temperature humidity index (THI) was calculated. There was significant (p<0.05) difference in the THI between shed and open corral in all the seasons, indicating that the shed was always warmer compared to open corral. The daily dry matter intake (DMI, g/d) was 965, 615 and 982 in sheep housed under shed and 971, 625 and 1,001 in those housed in open corral during monsoon, winter and summer season, respectively. These differences were however non-significant (p>0.05). The digestibility of DM was 45.92, 45.13 and 50.30 in sheep housed under shed and 43.64, 45.02 and 55.02 in sheep housed in open corral during monsoon, winter and summer seasons, respectively. There was no significant (p>0.05) difference in the digestibility of nutrients in sheep maintained under shed and in open corral. Blood Hb concentration was 13.97, 14.13 and 13.15 in sheep housed under shed and 15.27, 13.63 and 14.82 in those kept in open corral, whereas blood glucose concentration was 59.67, 59.70 and 52.33 in sheep under shed and 61.00, 61.00 and 57.83 in open corral, during monsoon, winter and summer, respectively. There was also no significant effect of housing on the body weight changes, wool yield and survivability in ewes. Although housing had no significant effect on nutrient intake, their utilization and blood parameters, there was significant effect on the physiological responses and energy expenditure of sheep maintained under the two housing systems (Bhatta et al., 2004). It can be concluded from this study that the housing systems didn't have any significant effect on the nutrient intake and utilization of native breed like Malpura, which were well adapted to the hot semi-arid conditions of India. However, while deciding provisions for housing of different breeds of sheep (both crossbred and native) parameters like physiological responses, energy expenditure, health conditions and overall economics of the systems should be taken into consideration.

경기도의 2개 시.군 사례를 통한 농어촌지역 하수도 정비 추진 방안 (A Strategy for Improving the Sewerage Systems of Two Rural Areas in Gyeonggi Province)

  • 문철환;안지훈;장미정;이상협;조영무;김연제
    • 대한환경공학회지
    • /
    • 제32권6호
    • /
    • pp.563-580
    • /
    • 2010
  • 2009년 환경부는 '농어촌지역 하수도정비 종합계획'을 발표하면서 도시지역과 농촌지역의 하수도 서비스 격차를 줄이고 농어촌지역의 생활환경을 개선하기 위하여 2015년까지 약 4조 7천억 원의 예산을 투입하여 농어촌지역의 하수도 보급률을 75%까지 향상하겠다고 밝혔다. 하지만 이번 종합계획은 소규모하수도의 문제점을 정확히 파악하지 못하고 있어 하수도 보급률 증가에 따른 수질개선 효과는 기대하기 어려울 것이다. 따라서 본 연구에서는 경기도의 2개 지역 마을하수도 정비 사례를 중심으로 마을하수도의 문제점과 해결방안에 대해서 알아보고, 종합계획을 추진하는데 고려되어야 할 사항들에 대해서 논의하고자 한다. 현장조사를 통하여 하수의 불균등 유입, 저유량, 저부하 등의 문제가 공통적으로 발생하고 있는 것을 파악하였다. 유입되는 부하량에 맞게 처리시설의 운전 방법을 개선해야 하지만 대부분의 시설들이 설계시 제시된 운전인자로 운전되고 있어 처리효율이 저하되는 것으로 조사되었다. 정밀진단에서는 문제점에 대한 해결방안으로 유량균등화, 포기/ 비포기 비율 조절 등을 검토하여 현장에 적용하였으며, 그 결과 유기물 및 탈질산화 반응에 의한 T-N의 처리효율 개선되는 것을 확인할 수 있었다.

벼줄기의 크리이프 거동(擧動)에 관한 연구 (Studies on Creep Behavior for Rice Stalks)

  • 허윤근;김성래;이상우
    • 농업과학연구
    • /
    • 제22권1호
    • /
    • pp.1-10
    • /
    • 1995
  • 기계화농업에서 농작물은 재배관리, 수확 및 가공과정에서 기계와 접촉하면서 기계로부터 순간적인 하중 및 지속적으로 받는 하중과 같은 여러 종류의 하중을 받아 변형되거나 파괴로 손상되는 등의 결과가 발생한다. 즉 기계작업 과정에서 작물은 파괴도 일어날 수 있으므로 작물의 물성에 따라 기계가 적응하면서 작업이 수행되어야 질적인 작업능율을 높일 수 있게 된다. 본 연구는 재배 및 수확과정에서 기계로부터 받는 벼 줄기의 역학적 특성의 구명을 위하여 크리이프 시험장치를 설계 제작하여 컴퓨터 측정장치를 구성, Burger모형(模型)에 의하여 수확시기에 측방향(側方向)의 압축하중 및 휨하중을 받는 벼 줄기의 크리이프 특성(特性)을 측정(測定) 분석(分析)하였다. 결과를 요약(要約)하면 다음과 같다. 1. 크리이프 거동은 4요소 Burger모형(模型)에 의하여 벼줄기의 크리이프거동을 정확히 예측(豫測)할 수 있었으며, 예측한 결과는 실측치에 거의 일치하였다. 2. 압축하중의 크기가 증가함에 따라 크리이프 변형량은 증가하는 경향이었는데, 25N 이하의 낮은 하중에서 정상상태 크리이프거동을 하였고, 30N 이상의 높은 하중에서 대수적 크리이프거동을 하였다. 3. 작용하중에 따른 크리이프거동을 나타내는 모형의 계수를 구하였는데 순간탄성계수 $E_0$ 및 지연시간 ${\tau}_K$는 작용하중의 증가에 따라 증가하였고, 지연탄성계수 $E_r$ 및 점성계수 ${\eta}_v$는 작용하중 증가에 따라 감소하는 점탄성(粘彈性) 재료(材料)임을 확인할 수 있었다. 4. 측방향 압축 하중이 25.0 N 이상 작용할 때 줄기 중부 및 상부에서 정상상태(定常狀態) 크리이프가 일어나, 하중의 작용시 줄기 부위(部位)에 따른 저항력은 하부(下部)에서 가장 컸고, 중부(中部)에서 가장 작게 나타나 파손 가능성이 높은 것으로 판단된다. 5. 압축하중 및 휨하중의 작용에 의한 줄기 부위에 따른 크리이프변형은 줄기 중부(中部)에서 가장 크게 일어났고, 하부(下部)에서 가장 작게 일어나 중부의 저항력이 가장 낮게 나타났다.

  • PDF