• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.241-241
• /
• 2008

Macrofore formation in silicon and other semiconductors using electrochemical etching processes has been, in the last years, a subject of great attention of both theory and practice. Its first reason of concern is new areas of macropore silicone applications arising from microelectromechanical systems processing (MEMS), membrane techniques, solar cells, sensors, photonic crystals, and new technologies like a silicon-on-nothing (SON) technology. Its formation mechanism with a rich variety of controllable microstructures and their many potential applications have been studied extensively recently. Porous silicon is formed by anodic etching of crystalline silicon in hydrofluoric acid. During the etching process holes are required to enable the dissolution of the silicon anode. For p-type silicon, holes are the majority charge carriers, therefore porous silicon can be formed under the action of a positive bias on the silicon anode. For n-type silicon, holes to dissolve silicon is supplied by illuminating n-type silicon with above-band-gap light which allows sufficient generation of holes. To make a desired three-dimensional nano- or micro-structures, pre-structuring the masked surface in KOH solution to form a periodic array of etch pits before electrochemical etching. Due to enhanced electric field, the holes are efficiently collected at the pore tips for etching. The depletion of holes in the space charge region prevents silicon dissolution at the sidewalls, enabling anisotropic etching for the trenches. This is correct theoretical explanation for n-type Si etching. However, there are a few experimental repors in p-type silicon, while a number of theoretical models have been worked out to explain experimental dependence observed. To perform ordered macrofore formaion for p-type silicon, various kinds of mask patterns to make initial KOH etch pits were used. In order to understand the roles played by the kinds of etching solution in the formation of pillar arrays, we have undertaken a systematic study of the solvent effects in mixtures of HF, N-dimethylformamide (DMF), iso-propanol, and mixtures of HF with water on the macrofore structure formation on monocrystalline p-type silicon with a resistivity varying between 10 ~ 0.01 $\Omega$ cm. The etching solution including the iso-propanol produced a best three dimensional pillar structures. The experimental results are discussed on the base of Lehmann's comprehensive model based on SCR width.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.8
• /
• pp.1285-1291
• /
• 1999

A feeding trial was carried out over 238 days to determine the effect of compensatory growth in crossbred calves having 166 kg body weight. Fifteen crossbred calves were divided into two groups of five calves (G1 group) and ten calves (G2 group) as per randomized block design. Growth study was conducted on the feeding of wheat straw based diet containing 60 and 30 percent concentrate supplying equal amount of protein in group G1 and G2 respectively for 119 days (phase - I). At the end of phase-I, calves of G2 group were subdivided in to two groups (G3 and G4). One sub group (G4) received 60% concentrate in their diet (during 120 to 238 days of experiment) while other subgroup G3 received 30% concentrate in their diet (phase-II). The calves of G1 group continued to receive the same diet as during phase-I experiment. Mean DM intake was significantly higher in calves fed high level of concentrate (in G1 and G4 groups), which resulted in significantly higher digestibility of all nutrients except NDF. Nitrogen balance was positive in all the groups and showed significant differences in phase-II (higher nitrogen retention in G4 group than G1 group). ME intake was significantly affected by the level of dietary concentrate, being higher in high concentrate fed group (G1 and G4 than G2 and G3 group). Higher daily body weight gain in the calves of G4 group during phase-II than in G1 and G3 groups was due to compensatory growth on shifting animals from low concentrate to high concentrate based ration. Average daily body weight gain was higher in phase-I than in the phase-II. Protein and energy intake per unit body weight gain were significantly lower in calves fed high concentrate diet.

• Korean Journal of Materials Research
• /
• v.25 no.11
• /
• pp.630-635
• /
• 2015

The fatigue strength of a nickel-base superalloy was studied. Stress-controlled fatigue tests were carried out at $700^{\circ}C$ and 5 Hz using triangular wave forms. In this study, two kinds of testing procedures were adopted. One is the conventional tension-zero fatigue test(R = 0). The other was a procedure in which the maximum stress was held at 1000 MPa and the minimum stress was diverse from zero to 1000 MPa at 24 and $700^{\circ}C$. The results of the fatigue tests at $700^{\circ}C$ indicate that the fracture mechanism changed according to both the mean stress and the stress range. At a higher stress range, ${\gamma}^{\prime}$ precipitates are sheared by a/2<110> dislocation pairs coupled by APB. Therefore, in a large stress range, the deformation occurred by shearing of ${\gamma}^{\prime}$ by a/2<110> dislocations, which brought about crystallographic shear fracture. As the stress range was decreased, the fracture mode gradually changed from crystallographic shear fracture to gradual growth of fatigue cracks. At an intermediate stress range, as it became more difficult for a/2<110> dislocation pairs to shear ${\gamma}^{\prime}$ particles, cracks started to propagate in the matrix, avoiding the harder ${\gamma}^{\prime}$ particles. High mean stress induced creep deformation, that is, ${\gamma}^{\prime}$ particles were sheared by {111}<112> slip systems, which led to the formation of stacking faults in the precipitates. Thus, the change in fracture mechanism brought about the inversion of the S-N curves.

• Ocean Systems Engineering
• /
• v.7 no.2
• /
• pp.143-155
• /
• 2017

For complex flexible structures such as nets, the determination of drag forces and its deformation is a challenging task. The accurate prediction of loads on cages is one of the key steps in designing fish farm facilities. The basic physics with a simple cage, can be addressed by the use of experimental studies. However, to design more complex cage system for various environmental conditions, a reliable numerical simulation tool is essential. In this work, the current load on a cage is calculated using a Morison-force model applied at instantaneous positions of equivalent-net modeling. Variations of solidity ratio ($S_n$) of the net and current speed are considered. An equivalent array of cylinders is built to represent the physical netting. Based on the systematic comparisons between the published experimental data for Raschel nets and the current numerical simulations, carried out using the commercial software OrcaFlex, a new formulation for $C_d$ values, used in the equivalent-net model, is presented. The similar approach can also be applied to other netting materials following the same procedure. In case of high solidity ratio and current speed, the hybrid model defines $C_d$ as a function of Re (Reynolds number) and $S_n$ to better represent the corresponding weak diffraction effects. Otherwise, the conventional $C_d$ values depending only on Re can be used with including shielding effects for downstream elements. This new methodology significantly improves the agreement between numerical and experimental data.

• Journal of Korean Academy of Nursing
• /
• v.41 no.1
• /
• pp.18-25
• /
• 2011

Purpose: This study was done to examine the effect of an integrated care service which included a combination of oriental and western care on health outcomes in elderly patients with degenerative arthritis. Methods: A prospective comparative design was used. Data were collected from May 1, 2008 to June 30, 2009 from 85 elderly patients with degenerative arthritis in the lower extremities who were followed in a hospital out-patient department for 8 weeks. The integrated care service group (n=36) received a combination of physical therapy, acupuncture, western medicines or herbal medicines, and the western care group (n=49) received physical therapy or western medicines. Functional independence, walking speed, rotation balance, pain intensity, service satisfaction and total medical costs for the two groups were compared at 8 weeks. Results: Functional independence (t=2.14, p=.036) and walking speed (t=2.51, p=.014) improved significantly in the integrated care group while pain intensity improved significantly in the western care group (t=3.35, p=.002). The integrated care group reported higher scores for service satisfaction (t=2.09, p=.041) and higher medical costs than the western care group (t=2.15, p=.035). Conclusion: The results suggest that integrated care services are effective modalities to improve mobility and quality of life for elders with degenerative arthritis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.12
• /
• pp.2727-2735
• /
• 1997

This paper describes a new fading compensation scheme for Wireless ATM(WATM) sytem using pilot symbols. We have carried out a simulation for bit error rate(BER) and cell loss probability(CLP) to analyze the performance of a new scheme. As the resutls, BER performance we improved by means of HEC only above 3 dB of $E_{b}/N_{0}$ in AWGN, but not at all in fading environment. However, by using a new fading compenstion scheme with HEC, BER performance degraded below to 1 dB of $E_{b}/N_{0}$ in AWGN, but BER and CLP performances in WATM system were improved remarkably, and meeted at CLP performance criterion for K=10 dB rician fading. Also, code rate will be high and harware size of codec will be small by using this new scheme with HEC OR FEC.

• Journal of Information Technology and Architecture
• /
• v.9 no.3
• /
• pp.333-344
• /
• 2012

This paper proposes a system which recommends movies using information from social network services containing personal interest and taste. Method for establishing data is as follows. The system gathers movies' information from web sites and user's information from social network services such as Facebook and twitter. The data from social network services is categorized into six steps of emotion level for more accurate processing following users' emotional states. Gathered data will be established into vector space model which is ideal for analyzing and deducing the information with the system which is suggested in this paper. The existing similarity measurement method for movie recommendation is presentation of vector information about emotion level and similarity measuring method on the coordinates using Cosine measure. The deducing method suggested in this paper is two-phase arithmetic operation as follows. First, using general cosine measurement, the system establishes movies list. Second, using similarity measurement, system decides recommendable movie list by vector operation from the coordinates. After Comparative Experimental Study on the previous recommendation systems and new one, it turned out the new system from this study is more helpful than existing systems.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.21 no.1
• /
• pp.35-40
• /
• 1985

The author carried out experiments to find out the response of rock bream, Oplegnathus fasciatus (TEMMINCK et SCHLEGEL) and sea bass, Epinephelus septemfasciatus (THUNBERG) to the color nettings. The experimental water tank(180L$\times$50W$\times$55Hcm) was set up n a dark room and water level was maintained 50cm high from the bottom. The tank was devided three longitudinal sections marking 60 cm interval. The illumination systems, consisted of 20 watt fluorescent lamps and filter, were suspended adove the tank. Two different color nettings selected from five colors (red, yellow, green, blue, black) were placed in each end section of the tank. Ten fish were used in each experiment and the fish were acclimatized in the dark for 60 minutes before experiment. After the light on, the number of fish in each section of the tank was counted in every 30 seconds interval for 30 minutes. The results obtained are as follows: 1. The rock bream selected the color nettings in the order of yellow, black, blue, green and red. 2. The sea bass selected the color nettings in the order of green, black, red, blue and yellow.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.2
• /
• pp.188-193
• /
• 2015

It has been generally recognized that $N_2O$(Nitrous Oxide) emission from marine diesel engines has a close correlation with $SO_2$(Sulfur Dioxide) emission, and diversity of fuel elements using ships affects characteristics of the $N_2O$ emission. According to recent reports, in case of existence of an enough large NO(Nitric Oxide) generated as fuel combustion, effect of the $SO_2$ emission in exhaust gas on the $N_2O$ formation is more vast than effect of the NO. Therefore, $N_2O$ formation due to the $SO_2$ element operates on a important factor in EGR(Exhaust Gas Recirculation) systems for NOx reduction. An aim of this experimental study is to investigate that intake gas of the diesel engine with increasing of $SO_2$ flow rate affects $N_2O$ emission in exhaust gas. A test engine using this experiment was a 4-stroke direct injection diesel engine with maximum output of 12 kW at 2600rpm, and operating condition was set up at a 75% load. A standard $SO_2$ gas with 0.499%($m^3/m^3$) was used for changing of $SO_2$ concentration in intake gas. In conclusion, the diesel fuel included out sulfur elements did mot emit the $SO_2$ emission, and the $SO_2$ emission in exhaust gas according as increment of the $SO_2$ standard gas had almost the same ratio compared with $SO_2$ rate in mixture inlet gas. Furthermore, the $N_2O$ element in exhaust gas was formed as $SO_2$ mixture in intake gas because increment of $SO_2$ flow rate in intake gas increased $N_2O$ emission. Hence, diesel fuels included sulfur compounds were combined into $SO_2$ in combustion, and $N_2O$ in exhaust gas should be generated to react with NO and $SO_2$ which exist in a combustion chamber.

• Journal of Conservation Science
• /
• v.16 s.16
• /
• pp.39-51
• /
• 2004

The standing Buddha named Taehwa 4 yew in the Jincheon were sculptured with rock cliff of the dark grey shale. Front of the Buddha statue shows $N40^{\circ}W$ strike with nearly vertical dip toward the back side. Rock blocks of the Buddha statue well developed with bedding and laminations whereas rock surface distributed into the various irregular discontinuities. Sculptured lines of the Buddha were uncertain because of degradation and exfoliations on the rock surface. The surface near the Buddha statue is highly contaminated with lichen and mosses, and accelerate physical and biological weathering owing to the roots of weed and bush along the fracture systems. For the conservational treatment, we treated with primary wet cleaning by air gun and secondary cleaning treatment using distilled water. Separated rock surface and fractured parts fasten and/or fill up the boundaries of the rock blocks using epoxy resin for conservation of rock properties. Some brittle surface was treatment with water repellent consolidant of ethyl silicates, and heterogeneous surface carried out color matching by acrylic pigments. Upper part of the Buddha statue dig out small ditch for rain water drainage, and near surface of the Buddha statue treat removal works for lichen, weeds and bush. The duration capacity of the Buddha constituting rocks are degraded by various weathering factors, therefore we suggest that this Buddha statue have need to do long term monitoring and synthetic conservation researches.