• Analytical Science and Technology
• /
• v.8 no.1
• /
• pp.33-40
• /
• 1995

Only trace amounts of hydroxide ion can be extracted from aqueous phase into organic phase by Tetra-n-Butyl Ammonium Chloride(TBAC). Addition of small amounts of primary alcohols, particularly certain dials, dramatically changes the behavior of Phase Transfer Catalysis systems, and surprising amounts of base can be found in the organic phase. Quantitative measurements were carried out for the extraction amounts of primary alkoxides, secondary alkoxides, and diol anions into organic phase. On the other hand, the selectivity constants for extraction of primary alcohols and benzylalcohol could be separated to the equilibrium constants of the ion pairs such as $Q^+RO^-$ and $Q^+Cl^-$ in the aqueous and organic phases and this distribution coefficients between phases on anions respectively. In a word, the colligated property for the selectivity of $Q^+RO^-$ in which $Q^+$ is quaternary cation and $RO^-$ alkoxide ion could be discussed in more detail by using of the corresponding free energies to the various constants mentioned.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.2
• /
• pp.389-405
• /
• 2014

Outdated Channel State Information (CSI) was proved to have negative effect on performance in two-way relay networks. The diversity order of widely used opportunistic relay selection (ORS) was degraded to unity in networks with outdated CSI. This paper proposed a multiple relay selection scheme for amplify-and-forward (AF) based two-way relay networks (TWRN) with outdated CSI. In this scheme, two sources exchange information through more than one relays. We firstly select N best relays out of all candidate relays with respect to signal-noise ratio (SNR). Then, the ratios of the SNRs on the rest of the candidate relays to that of the Nth highest SNR are tested against a normalized threshold ${\mu}{\in}[0,1]$, and only those relays passing this test are selected in addition to the N best relays. Expressions of outage probability, average bit error rate (BER) and ergodic channel capacity were obtained in closed-form for the proposed scheme. Numerical results and Simulations verified our theoretical analyses, and showed that the proposed scheme had significant gains comparing with conventional ORS.

• Journal of Korean Neurosurgical Society
• /
• v.59 no.5
• /
• pp.425-429
• /
• 2016

Objective : Rod-screw fixation systems are widely used for spinal instrumentation. Although many biomechanical studies on rod-screw systems have been carried out, but the effects of rod contouring on the construct strength is still not very well defined in the literature. This work examines the mechanical impact of straight, $20^{\circ}$ kyphotic, and $20^{\circ}$ lordotic rod contouring on rod-screw fixation systems, by forming a corpectomy model. Methods : The corpectomy groups were prepared using ultra-high molecular weight polyethylene samples. Non-destructive loads were applied during flexion/extension and torsion testing. Spine-loading conditions were simulated by load subjections of 100 N with a velocity of $5mm\;min^{-1}$, to ensure 8.4-Nm moment. For torsional loading, the corpectomy models were subjected to rotational displacement of $0.5^{\circ}\;s^{-1}$ to an end point of $5.0^{\circ}$, in a torsion testing machine. Results : Under both flexion and extension loading conditions the stiffness values for the lordotic rod-screw system were the highest. Under torsional loading conditions, the lordotic rod-screw system exhibited the highest torsional rigidity. Conclusion : We concluded that the lordotic rod-screw system was the most rigid among the systems tested and the risk of rod and screw failure is much higher in the kyphotic rod-screw systems. Further biomechanical studies should be attempted to compare between different rod kyphotic angles to minimize the kyphotic rod failure rate and to offer a more stable and rigid rod-screw construct models for surgical application in the kyphotic vertebrae.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.12
• /
• pp.509-514
• /
• 2016

From the point of view to prevent airborne infection-related diseases such as H1N1, SARS, and MERS, an actual application of air cleaning and purification systems including technologies like UVGI has become increasingly important. Recently, an air purification system using REME (Reflective Electro Magnetic Energy) developed in the U.S. is applied for indoor air purification and sterilization technology to counteract the outbreak of new airborne infections. In this study, an air sterilization performance experiment using REME was carried out. The results verified that air sterilization performance in the case of installing a REME system in a medical center was 31%, namely the number of floating bacteria decreased by 31% after only a five-day operation. In addition, the number of culture collections in the REME operating air conditioning systems using nonpathogenic Geobacillus stearothemophilus as a biological indicator decreased maximally to 67%. A field application of REME technology will be useful to prevent airborne infection-related diseases, especially in response to public health crises due to the advent of emerging diseases.

• Journal of Bio-Environment Control
• /
• v.18 no.4
• /
• pp.363-369
• /
• 2009

This experiment was conducted to find out the effect of nutrient solution composition on the growth of cucumber plants and the changes in macro-elements in nutrient solutions in recirculating hydroponic systems. Cucumber plants (Cucumis sativus L. cv. Joeun Baegdadagi) were grown in closed perlite cultivation systems supplied with different nutrient solutions developed by NHRS (National Horticultural Research Station in Japan), Yamasaki, PBG (Proefstation voor Bloemisterij en Glasgroente), and NIHHS (National Institute of Horticultural and Herbal Science in Korea). The concentrations of $NO_{3^-}N$, $Ca^{2+}$, $Mg^{2+}$, and $SO_{4^-}S$ in the recycled nutrient solutions increased but that of $NH_{4^-}N$ decreased gradually in all the treatments. The $PO_{4^-}P$ and $K^+$ concentrations were continuously reduced from the beginning of the harvest to the harvest peak period. There were no significant differences in the concentrations of $NO_{3^-}N$, $NH_{4^-}N$, and $Ca^{2+}$ in the recirculated nutrient solutions among four treatments, while the concentrations of $PO_{4^-}P$ and $K^+$ were lowest and those of $Mg^{2+}$ and $SO_{4^-}S$ were highest in the treatment of Yamasaki's nutrient solution. All growth-related parameters of cucumber plants except for leaf number were not significantly affected by the nutrient solution compositions. Due to its low concentrations of $PO_{4^-}P$ and $K^+$ in the recycled nutrient solution, however, the number and yield of cucumber fruits were lowest in the treatment of Yamasaki's nutrient solution.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.1
• /
• pp.1-11
• /
• 2002

Flow of fluid has been studied in various fields of fluid engineering. To hydraulic engineers, the unsteady flow such as pulsation and liquid hammering in pipes has been considered as a serious trouble. So we are supposed to approach the formalized mathematical model by using more exact momentum equation for fluid transmission lines. Most of recent studies fur pipe line have been studied without considerations of variation of viscosity and temperature, which are the main factors of pressure loss causing the friction of fluid inside pipe line. Frequency response experiments are carried out with use of a rotary sinusoidal flow generator to investigate wave equation take into account viscosity and temperature. But we observed that measured value of gains are reduced as temperature increased. And it was respectively observed that the measured value of gains are reduced and line width of gain is broadened out, when temperature was high in the same condition. As we confessed, pressure loss and phase delay are closely related with the length, diameter and temperature of pipe line. In addition, they are the most important factors, when we decide the momentum energy of working fluid.

• 전자공학회논문지 IE
• /
• v.48 no.1
• /
• pp.1-6
• /
• 2011

In this study, it carried out Electromagnetic Field Analysis of Magnetic Bearing due to stator structure and it got the electrical characteristics of 3 structure types of AMB(Active magnetic bearing) systems to get optimal design criteria. The results of simulation in three types of AMB, using FEM method, type 1, 2, and 3 had many paths to move magnetic flux vectors from N pole to S pole and magnetic flux lines are transferred to rotor as a shaft. The paths help to rotate the rotors. So, their data of electrical properties carry out design of magnetic bearing system and the data help to make design criteria.

• Ocean Systems Engineering
• /
• v.1 no.4
• /
• pp.285-296
• /
• 2011

Spar platforms have several advantages for deploying wind turbines in offshore for depth beyond 120 m. The merit of spar platform is large range of topside payloads, favourable motions compared to other floating structures and minimum hull/deck interface. The main objective of this paper is to present the response analysis of the slack moored spar platform supporting 5MW wind turbine with bottom keel plates in regular and random waves, studied experimentally and numerically. A 1:100 scale model of the spar with sparD, sparCD and sparSD configuration was studied in the wave basin ($30{\times}30{\times}3m$) in Ocean engineering department in IIT Madras. In present study the effect of wind loading, blade dynamics and control, and tower elasticity are not considered. This paper presents the details of the studies carried out on a 16 m diameter and 100 m long spar buoy supporting a 90 m tall 5 MW wind turbine with 3600 kN weight of Nacelle and Rotor and 3500 kN weight of tower. The weight of the ballast and the draft of the spar are adjusted in such a way to keep the centre of gravity below the centre of buoyancy. The mooring lines are divided into four groups, each of which has four lines. The studies were carried out in regular and random waves. The operational significant wave height of 2.5 m and 10 s wave period and survival significant wave height of 6 m and 18 s wave period in 300 m water depth are considered. The wind speed corresponding to the operational wave height is about 22 knots and this wind speed is considered to be operating wind speed for turbines. The heave and surge accelerations at the top of spar platform were measured and are used for calculating the response. The geometric modeling of spar was carried out using Multisurf and this was directly exported to WAMIT for subsequent hydrodynamic and mooring system analysis. The numerical results were compared with experimental results and the comparison was found to be good. Parametric study was carried out to find out the effect of shape, size and spacing of keel plate and from the results obtained from present work ,it is recommended to use circular keel plate instead of square plate.

• Industrial Engineering and Management Systems
• /
• v.7 no.1
• /
• pp.66-77
• /
• 2008

The existence of Internet revolutionized the computer and communications world. With the rising demand for accessing the Internet, the mobile technology has incorporated the use of Internet in mobile phones. Wireless Application Protocol (WAP) has combined two of the widest utilized technology today: mobile phones and Internet. This study aims to assess the existing WAP pages offered by the top service providers in the Philippines through usability testing experiments. The paper also aims to identify existing problems in WAP interface by focusing on the errors committed by the users. From the usability study, it was found out that common usability problems are wrong selection of links, unclear grouping of categories, wrong feedback, and redundant links. The type of service provider used is significant in determining the performance of users while experience in accessing WAP is insignificant.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.917-921
• /
• 2004

Principle of mailing list was distributed messages to all subscribers in one time. But mailing list operation has constructed a network traffic problem. Because mailing list manager distributed mails without concentrate on subscriber network. If our network has many of subscribers, there will be redundant data in traffic channel. Submailing list has purpose to reduce problems. Analyses of mailing list characteristic in electronic mail were a feature of submailing list system, which manage by human hand (Network Administrator). That will cause trouble for network traffic if Network Administrator could not seek for mailing list characteristic from e-mails in due time. This article will present ideas and recognize methodology for automatic working in submailing list system. Recognize step begin with capture process, which use to trap e-mail information from transfer channel. Next process is preparing raw data into recognition format. Then the third one is recognize part and find out confidential factor. The last process is make decision and determine which electronic mail has properties of mailing list characteristic. Afterward deliver result to submailing list for carry on.