• Advances in Computational Design
• /
• 제6권1호
• /
• pp.55-75
• /
• 2021

The lightweight superstructure is beneficial for bridges in remote areas and emergency erection. In such weight-sensitive applications, the combination of fiber-reinforced polymer (FRP) as a material and box-beams as a structural system have enormous scope. This combination offers various advantages, but as a thin-walled structure, their designs are often governed by buckling criteria. FRP box-beams lose their stability either by flange or web buckling mode. In this paper, the web buckling behavior of simply supported FRP box-beam subjected to transverse load has been studied by modeling full box-beam to consider the effect of real state of stress (stress variation in length direction) and boundary conditions (rotational restraint at web-flange junction). A parametric study by varying the sectional geometry and fiber orientation is carried out by using ANSYS software. The accuracy of the FE models was ensured by verifying them against the available results provided in the literature. With the help of developed database the influential parameters (i.e., αs, βw, δw and γ) affecting the web bucklings are identified. Design trends have been developed which will be helpful to the designers in the preliminary stage. Finally, the importance of governing parameters and design trends are demonstrated through pedestrian bridge design.

• 동남아시아연구
• /
• 제21권2호
• /
• pp.1-41
• /
• 2011

Southeast Asia developed maritime trade from the early period due to the suitable physical and cultural conditions. The land consists of peninsular and archipelago, and located at the junction of the two monsoons in South China Sea and India Ocean. The people inherit cultural openness to receive outer influences positively. When Portuguese came to Southeast Asia in 16th century, the region had already enjoyed certain level of commercial development and sociocultural dynamics through the long time experience of interactions with outer world. The Portuguese contact to Southeast Asia was more of participation and assimilation than of conquest and rule experienced in South America. It was due to the higher level of spiritual and material civilization existed in Southeast Asia. Portuguese brought several new elements into Southeast Asia such as colonization and new weapons, Cartaz system and commercial monopoly, and Catholic mission and Casado policy. These new elements, however, did not impact much on the existing Maritime trade that played an important role to change the sociocultural structure of Southeast Asia. Even though Portuguese contact itself did not make significant differences in Southeast Asia, it was meaningful in a sense that it opened a path and left a model case for the more powerful Europeans who came soon after her.

• Journal of Semiconductor Engineering
• /
• 제3권2호
• /
• pp.161-167
• /
• 2022

Electrical characteristics of LDMOS power device with LDD(Lightly Doped Drain) structure is studied with variation of the region of channel and LDD. The channel in LDMOSFET encloses a junction-type source and is believed to be an important parameter for determining the circuit operation of CMOS inverter. Two-dimensional TCAD MEDICI simulation is used to study hot-carrier effect, on-resistance Ron, breakdown voltage, and transient switching characteristic. The voltage-transfer characteristics and on-off switching properties are studied as a function of the channel length and doping levels. The digital logic levels of the output and input voltages are analyzed from the transfer curves and circuit operation. Study indicates that drain current significantly depends on the channel length rather than the LDD region, while the switching transient time is almost independent of the channel length. The high and low logic levels of the input voltage showed a strong dependency on the channel length, while the lateral substrate resistance from a latch-up path in the CMOS inverter was comparable to that of a typical CMOS inverter with a guard ring.

• 한국전기전자재료학회논문지
• /
• 제36권2호
• /
• pp.151-157
• /
• 2023

Integrating dielectric materials into LTCC is a convenient method to increase the integration density in electronic circuits. To enable co-firing of the high-k and low-k dielectric LTCC materials in a multi-material hetero-laminate, the shrinkage characteristics of both materials should be similar. Moreover, thermal expansion mismatch between materials during co-firing should be minimized. The alternating stacking of an LTCC with silica filler and that with calcium-zirconate filler was observed to examine the use of the same glass in different LTCCs to minimize the difference in shrinkage and thermal expansion coefficient. For the LTCC of silica filler with a low dielectric constant and that of calcium zirconate filler with a high dielectric constant, the amount of shrinkage was examined through a thermomechanical analysis, and the predicted appropriate fraction of each filler was applied to green sheets by tape casting. The green sheets of different fillers were alternatingly laminated to the thickness of 500 ㎛. As a result of examining the junction, it was observed through SEM that a complete bonding was achieved by constrained sintering in the structure of 'calcium zirconate 50 vol%-silica 30 vol%-calcium zirconate 50 vol%'.

• 반도체디스플레이기술학회지
• /
• 제21권4호
• /
• pp.6-13
• /
• 2022

The electrostatic phenomenon seriously issued in extreme ultraviolet semiconductor cleaning was studied in junction with molecular dynamic aspect. It was understood that two lone pairs of electrons in water molecule were subtly different each other in molecular orbital symmetry, existed as two states of large energy difference, and became basis for water clustering through hydron bonds. It was deduced that when hydrogen bond formed by lone pair of higher energy state was broken, two types of [H₂O]⁺ and [H₂O]^- ions would be instantaneously generated, or that lone pair of higher energy state experiencing reactions such as friction with Teflon surface could cause electrostatic generation. It was specifically observed that, in case of electrolyzed cathode water, negative electrostatic charges by electrons were overlapped with negative oxidation reduction potentials without mutual reaction. Therefore, it seemed that negative electrostatic development could be minimized in cathode water by mutual repulsion of electrons and [OH]^- ions, which would be providing excellences on extreme ultraviolet cleaning and electrostatic control as well.

• Steel and Composite Structures
• /
• 제45권1호
• /
• pp.119-131
• /
• 2022

Due to the complexity of the structure and the limits of classical SEA, a combined SEA approach is employed, with angle-dependent SEA in the low- and mid-frequency ranges and advanced SEA (ASEA) considering indirect coupling in the high-frequency range. As an important component of the steel box girder, the dynamic response of an L-junction periodic ribbed plate is calculated first by the combined SEA and validated by the impact hammer test and finite element method (FEM). Results show that the indirect coupling due to the periodicity of stiffened plate is significant at high frequencies and may cause the error to reach 38.4 dB. Hence, the incident bending wave angle cannot be ignored in comparison to classical SEA. The combined SEA is then extended to investigate the vibration properties of the steel box girder. The bending wave transmission study is likewise carried out to gain further physical insight into indirect coupling. By comparison with FEM and classical SEA, this approach yields good accuracy for calculating the dynamic responses of the steel box girder made of periodic ribbed plates in a wide frequency range. Furthermore, the influences of some important parameters are discussed, and suggestions for vibration and noise control are provided.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.427-427
• /
• 2016

Organic-inorganic hybrid perovskite have attracted significant attention as a new revolutionary light absorber for photovoltaic device due to its remarkable characteristics such as long charge diffusion lengths (100-1000nm), low recombination rate, and high extinction coefficient. Recently, power conversion efficiency of perovskite solar cell is above 20% that is approached to crystalline silicon solar cells. Planar heterojunction perovskite solar cells have simple device structure and can be fabricated low temperature process due to absence of mesoporous scaffold that should be annealed over 500 oC. However, in the planar structure, controlling perovskite film qualities such as crystallinity and coverage is important for high performances. Those controlling methods in one-step deposition have been reported such as adding additive, solvent-engineering, using anti-solvent, for pin-hole free perovskite layer to reduce shunting paths connecting between electron transport layer and hole transport layer. Here, we studied the effect of alkali metal halide to control the fabrication process of perovskite film. During the morphology determination step, alkali metal halides can affect film morphologies by intercalating with PbI2 layer and reducing $CH3NH3PbI3{\cdot}DMF$ intermediate phase resulting in needle shape morphology. As types of alkali metal ions, the diverse grain sizes of film were observed due to different crystallization rate depending on the size of alkali metal ions. The pin-hole free perovskite film was obtained with this method, and the resulting perovskite solar cells showed higher performance as > 10% of power conversion efficiency in large size perovskite solar cell as $5{\times}5cm$. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and inductively coupled plasma optical emission spectrometry (ICP-OES) are analyzed to prove the mechanism of perovskite film formation with alkali metal halides.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.294.1-294.1
• /
• 2016

Transition metal dichalcogenides (TMDs) with two-dimensional layered structure, such as molybdenum disulfide (MoS2) and tungsten diselenide (WSe2), are considered attractive materials for future semiconductor devices due to its relatively superior electrical, optical, and mechanical properties. Their excellent scalability down to a monolayer based on the van der Waals layered structure without surface dangling bonds makes semiconductor devices based on TMD free from short channel effect. In comparison to the widely studied transistor based on MoS2, researchs focusing on WSe2 transistor are still limited. WSe2 is more resistant to oxidation in humid ambient condition and relatively air-stable than sulphides such as MoS2. These properties of WSe2 provide potential to fabricate high-performance filed-effect transistor if outstanding electronic characteristics can be achieved by suitable metal contacts and doping phenomenon. Here, we demonstrate the effect of two different metal contacts (titanium and platinum) in field-effect transistor based on WSe2, which regulate electronic characteristics of device by controlling the effective barreier height of the metal-semiconductor junction. Electronic properties of WSe2 transistor were systematically investigated through monitoring of threshold voltage shift, carrier concentration difference, on-current ratio, and field-effect mobility ratio with two different metal contacts. Additionally, performance of transistor based on WSe2 is further enhanced through reliable and controllable n-type doping method of WSe2 by triphenylphosphine (PPh3), which activates the doping phenomenon by thermal annealing process and adjust the doping level by controlling the doping concentration of PPh3. The doping level is controlled in the non-degenerate regime, where performance parameters of PPh3 doped WSe2 transistor can be optimized.

• 전자공학회논문지D
• /
• 제36D권3호
• /
• pp.66-74
• /
• 1999

HMC(Hybrid Monte Carlo)시뮬레이션을 이용하여 InAlGaAs/InGaAs HBT의 비평형 고속전송을 해석하였고, 전송시간 및 차단주파수를 향상시키기 위하여 에미터-베이터 이종접합과 콜렉터 구조를 최적 설계 하였다. 시뮬레이션 결과, 에미터 조성경사영역에서 Al 몰비를 xf=1.0에서 xf=0.5로 변화시킬 경우 베이스 전송시간이τb=0.21ps로 가장 짧았다. 콜렉터 전송시간을 단축시킬 목적으로 콜렉터와 베이스 사이에 n\sup +\형 (콜렉터-Ⅰ), I형(콜렉터-Ⅱ), p형(콜렉터-Ⅲ), 콜렉터를 삽입하여 베이스-콜렉터 공간전하영역의 전계분포를 전자의 비평형고속전송을 유지하도록 설계하였다. 콜렉터-Ⅲ 구조에서는 전자의 음이온화된 억셉터가 콜렉터의 전계를 감소시킴으로써 전자가 Γ 밸리에서 먼 거리까지 전송을 가능하게 하여 가장 짧은 콜렉터 전송시간을 나타내었다. 결론적으로 가장 짧은 전송시간 τec는 Al 몰비가 xf=0.5인 에미터 구조와 콜렉터-Ⅲ에서 0.87psec이었고, 차단주파수 ft=183GHz를 나타내었다.

• 한국강구조학회 논문집
• /
• 제9권2호통권31호
• /
• pp.249-257
• /
• 1997

본 연구에서는 호안의 안벽 및 방파제의 조성에 있어 기존의 타공법에 비해 경제성, 공사기간 및 시공장비 측면에서 유리한 거치식 강판셀 공법의 설계 기법 및 구조적 건전성 확보를 위해 실시한 실험 연구 결과를 제시하였다. 강판셀 구조는 다수의 보강재와 셀-아크 연결부 등이 존재하는 얇은 쉘 구조로서 그 거동이 복잡할 뿐만 아니라 설계 기준에서 셀 및 아크 내부의 속채움 토압의 크기가 다소 모호하게 규정되어 있다. 이러한 문제의 해결을 위해 실규모의 원통형 단면벽 강판셀 구조$(D11.0^m{\times}H14.0^m{\times}12t)$를 설계 제작하여 해상에 거치하고 속채움을 한 후 현장 응력계측을 수행하였으며, 그 결과를 상세 구조해석 결과와 비교 분석함으로써 당 공법의 설계 기술을 구축하고자 하였다.