Objective: The aim of this study was to investigate the influence of seat heights for optimizing the ingress/egress performance in the elderly people. Background: Recently elderly users have been increasing in number and the ease of ingress/egress of the vehicle becomes an important issue. Method: Seven elderly subjects participated in this study(age: 71.7${\pm}$3.6yr, height: 167.7${\pm}$5.4cm, weight: 68.1${\pm}$11.5kg). Each subject performed the sitting and rising task from comfortable seated position on the chair under the following conditions: (1) with a lumbar support and (2) without a lumbar support. We measured EMG activities of seven muscles(tibialis anterior, soleus, gastrocnemius, vastus lateralis, rectus femoris, biceps femoris and erector supinae) and ranges of motion in lower limb during sitting and standing from three different heights (400mm, 500mm and 600mm from ground) of slide-up seat. Results: Muscle activities and angular movements of hip and knee joints during standing-up and sitting-down with a high seat height(600mm) were reduced mean 30.4% in extensor muscles, 57.11% in flexor muscle, 18.74% in erector muscle and 31.0% in joints compared with a low seat height(400mm). Conclusion: Muscle activities and joint movements in hip and knee were reduced when rising/sitting from a high seat height(600mm) compared with a low seat height(400mm). Application: This study can be used to design vehicle that are easy to get in and out of by older peoples with or without impairments.
Purpose: The purpose of this study was to use an ICF tool in an intervention for anterior cruciate ligament reconstruction (ACLR) patients to examine and evaluate the patients' functional problems, measure the results of the intervention, and present the process of preparing proprioceptive neuromuscular facilitation (PNF) intervention strategies, thereby contributing to changes in and development of relevant future clinical practices. Methods: A PNF rehabilitation exercise program using an ICF tool was applied to ACLR patients five times per week for four weeks. To measure the resulting changes, the ICF evaluation display, the visual analog scale (VAS), the manual muscle test (MMT), the range of motion (ROM) test, the Lysholm knee score (LKS), and the muscle endurance test (MET) were used. Results: After the intervention was applied to the ACLR patients, improvements were achieved in all the tests: ICF evaluation display, VAS, MMT, ROM, LKS, and MET. Conclusion: Utilizing the ICF tool, this study identified functional problems of ACLR patients. When the intervention was applied, physical functions improved, and structural damage was reduced, leading to enhanced levels of functional activities such as postural changes, posture maintenance, gait, movements, and movements between different places. The patients were able to complete the teacher training, which was their goal.
Objective: Jowiseunggi-tang (JWSGT) is a traditional herbal medicine commonly used for purgative activity in constipation. This study evaluates JWSGT for the treatment of opioid-induced constipation (OIC), the most common and debilitating gastrointestinal effect of opioid use. Methods: A 64-year-old man with floor of mouth cancer was hospitalized for OIC, and JWSGT was administered orally twice a day for 10 days, along with acupuncture, moxibustion, and cupping. The primary outcome measures were defecation type according to the Bristol Stool Form Scale (BSFS) and the frequency of bowel movements. The Brief Fatigue Inventory (BFI) and the Functional Assessment of Cancer Therapy-General (FACT-G) were used as secondary measures. Results: After three days of JWSGT administration, spontaneous bowel movements were observed two to three times per week with improved BSFS from type 2 to 4. A reduction in BFI score (8.7 to 2.0) and an increase in FACT-G score (44.3 to 59.0) suggested an improvement in fatigue level and quality of life. Conclusion: This is the first report to assess the efficacy of JWSGT for the management of OIC in patients with cancer, and JWSGT may be an effective option to improve symptoms and quality of life in this group.
With the development of Internet of Things (IoT) technologies, numerous people worldwide connect with various electronic devices via Human-Machine Interfaces (HMIs). Considering that HMIs are a new concept of dynamic interactions, wearable electronics have been highlighted owing to their lightweight, flexibility, stretchability, and attachability. In particular, wearable strain sensors have been applied to a multitude of practical applications (e.g., fitness and healthcare) by conformally attaching such devices to the human skin. However, the stretchable elastomer in a wearable sensor has an intrinsic stretching limitation; therefore, structural advances of wearable sensors are required to develop practical applications of wearable sensors. In this study, we demonstrated a 3-dimensional (3D), porous, and piezoelectric strain sensor for sensing body movements. More specifically, the device was fabricated by mixing polydimethylsiloxane (PDMS) and polyvinylidene fluoride nanoparticles (PVDF NPs) as the matrix and piezoelectric materials of the strain sensor. The porous structure of the strain sensor was formed by a sugar cube-based 3D template. Additionally, mixing methods of PVDF piezoelectric NPs were optimized to enhance the device sensitivity. Finally, it is verified that the developed strain sensor could be directly attached onto the finger joint to sense its movements.
The purpose of this study is to elucidate the mechanical characteristics of lower extremity joint movements at different walking speeds in obese people and suggest the very suitable exercise for obese person's own body weight and basic data for clinical application leading to medical treatment of obesity. This experimental subjects are all males between the ages of 20 and 30, who are classified into two groups according to Body Mass Index(BMI): one group is 15 people with normal body weight and the other 15 obese people. Walking speed is analysed at 3 different speeds ($1.5^m/s$, $1.8^m/s$, $2.1^m/s$) which is increased by $0.3^m/s$ from the standard speed of $1.5^m/s$. We calculated joint moments of lower extremity during stance phase through video recording and platform force measurement.Two-way ANOVA(Analysis of Variance, Mix) is applied to get the difference of moments according to walking speeds between normal and obese groups. Pearson's Correlation Analysis is applied to look into correlation between walking speeds and joint moments in both groups. Significance level of each experiment is set as ${\alpha}=.05$. As walking speed increases maximum ankle plantar flexion moment in the stance phase is smaller in obese group than in normal group, which is suggestive of weak toe push-off during terminal stance in obese group, and the highest maximum ankle plantar flexion moment in obese group during the middle speed walking($1.8^m/s.$). Maximum ankle dorsal flexion moment in obese group is relatively higher than in normal group and this is regarded as a kind of compensatory mechanism to decrease the impact on ankle when heel contacts the floor. Maximum knee flexion and extension moments are both higher in normal group with an increase tendency proportional to walking speed and maximum hip flexion and extension moments higher in obese group. In summary, maximum ankle plantar flexion moment between groups(p<.025), maximum knee moment not in flexion but in extension(p<.001) within each group according to increasing walking speed, and maximum hip flexion and extension moment(p<.001 and p<.004, respectively according to increasing walking speed are statistically significant but knee and hip moments between groups are not. Pearson correlation are different: high correlation coefficients in maximum knee flexion and extension moments, in maximum hip extension moment but not hip flexion, and in maximum ankle dorsal flexion moment but not ankle plantar flexion, in each group. We suspect that equilibrium imbalance develops when the subject increases walking speed and the time is around which he takes his foot off the floor.
Purpose: There has been a need to integrating the self-help program for arthritis with the TaiChi for arthritis patient. The purpose of this study was to develop and to examine the effect of the Self-help and Tai Chi for arthritis (SHTCA) program for arthritis. Method: This study was designed non equivalent control group pre-post test, quasi-experimental design. A total 40 participants were recruited in W-city, 29 participants(14-experimental group and 15-control group) completed post test. The experimental group participated in the SHTCA once a week for 8 weeks. SHTCA program was consisted of understanding of the arthritis, contracting of the promise, exercise for muscle strength and joint flexibility and 8 movements of Tai Chi exercise. Coloring plus program to cellular phone was used to encourage the exercise and participation by the KT-SHUT twice a week. Measures used to examine the effect of the SHTCA were EQ-5D standardized five dimensions(mobility, self-care, usual activities, pain & discomfort, and anxiety & depression), and health perception, joint flexibility, grasping power, and balance. Collected data was analyzed by SPSS WIN 14.0. Results: The experimental group had significantly increased the EQ-mobility(p=.033), health perception(p=.000), right shoulder flexibility(p=.007), and left shoulder flexibility(p=.002) compared to the control group. In addition, pain was decreased(p=.052) and right grip was increased(p=.052) after 8 weeks program in the experimental group. Conclusion: This SHTCA using coloring plus program was found partially effective and satisfactory. We recommended further research on the effect of this SHTCA effects.
Objective: The purpose of this study was to investigate the difference in muscle strength, kinematics, and kinetics between injured and non-injured sides of the leg after Achilles Tendon Rupture surgery during walking and running. Method: The subjects (n=11; age = 30.63 ± 5.69 yrs; height = 172.00 ± 4.47 cm; mass = 77.00 ± 11.34 kg; time lapse from surgery = 29.81 ± 10.27 months) who experienced Achilles Tendon Rupture (ATR) surgery participated in this study. The walking and running trials were collected using infrared cameras (Oqus 300, Qualisys, Sweden, 100 Hz) on instrumented treadmill (Bertec, U.S.A., 1,000 Hz) and analyzed by using QTM (Qualisys Track Manager Ver. 2.15; Qualisys, U.S.A). The measured data were processed using Visual 3D (C-motion Inc., U.S.A.). The cutoff frequencies were set as 6 Hz and 12 Hz for walking and running kinematics respectively, while 100 Hz was used for force plate data. Results: In ATR group, muscle strength there were no difference between affected and unaffected sides (p> .05). In kinematic analysis, subjects showed greater ROM of knee joint flexion-extension in affected side compared to that of unaffected side during walking while smaller ROM of ankle dorsi-plantar and peak knee flexion were observed during running (p< .05). In kinetic analysis, subjects showed lower knee extension moment (running at 2.2 m/s) and positive ankle plantar-flexion power (running at 2.2 m/s, 3.3 m/s) in affected side compared to that of unaffected side (p< .05). This lower positive ankle joint power during a propulsive phase of running is related to slower ankle joint velocity in affected side of the subjects (p< .05). Conclusion: This study aimed to investigate the functional evaluation of the individuals after Achilles tendon rupture surgery through biomechanical analysis during walking and running trials. Based on the findings, greater reduction in dynamic joint function (i.e. lower positive ankle joint power) was found in the affected side of the leg compared to the unaffected side during running while there were no meaningful differences in ankle muscle strength and walking biomechanics. Therefore, before returning to daily life and sports activities, biomechanical analysis using more dynamic movements such as running and jumping trials followed by current clinical evaluations would be helpful in preventing Achilles tendon re-rupture or secondary injury.
본 연구에서는 무등산국립공원 입석대 주상절리대의 거동을 예측하고 안정성을 파악하기 위하여 수치해석을 실시하였다. 수치해석은 불연속체 해석이 가능한 개별요소법 기반인 3DEC을 사용하였다. 수치해석 시 사용한 지반 물성의 결과 평균 밀도는 2.68 kN/m3 평균 수직강성은 3.15 GPa/m, 평균 전단강성은 1.00 GPa/m, 평균 점착력은 0.51 MPa, 평균 마찰각은 33°으로 나타났다. 입석대 주상절리대 전망대와 등산로 사이 15개의 입석대 주상절리대에 대하여 현장조사 결과를 바탕으로 모델링을 실시하였다. 수치해석 시 주상절리 윗면과 밑면의 모서리의 변위를 분석하여 각 주상절리의 거동을 분석하였고, 최대 변위는 6번 주상절리에서 약 0.67 mm로 가장 크게 나타났고, 최소 변위는 11번 주상절리에서 0.21 mm로 가장 크게 나타났다. 수치해석 결과 최소변위가 가장 크게 발생한 11번 주상절리 내부의 분리면 5개 거동을 분석한 결과 2층에서 가장 큰 변위가 발생하였고, 그 다음으로 5층, 4층, 1층, 그리고 3층 순으로 나타났다. 이를 통해 입석대 주상절리 15개에서 발생한 변위의 총량을 고려하면 안정한 것으로 판단된다. 하지만 무등산국립공원의 문화적, 역사적 가치를 고려해볼 때 사면전체 안정성 뿐만 아니라 입석대 주상절리 개별 블록에 대한 모니터링도 실시하여 현재의 안정성을 유지해야할 것으로 사료된다.
Sihyun Ryu;Young-Seong Lee;Soo-Ji Han;Sang-Kyoon Park
한국운동역학회지
/
제33권1호
/
pp.25-33
/
2023
Objective: The purpose of this study was to investigate the differences in static arch height and ankle stability according to the preference for insole height and hardness in the arch area. Method: The study participants were 20 adult males (age: 22.7 ± 1.8 yrs., height: 175.3 ± 4.3 cm, body weight: 72.5 ± 7.7 kg). First, the arch heights of all subjects were measured in static postures (sitting and standing). The inversion and eversion movements of the ankle joint were analyzed during walking (1.3 m/s & 1.7 m/s) and running (2.7 m/s & 3.3 m/s). The variables (static arch height, and inversion and eversion angle of ankle joint) were compared by classifying groups according to the preference for the height and hardness of the arch of the insole. First, it was divided into a high arch insole preference group (HAG, n=8) and a low arch insole preference group (LAG, n=12) according to the preference for the arch height of the insole. Second, it was divided into a high hardness insole preference group (HHG, n=7), medium hardness insole preference group (MHG, n=7), and low hardness insole preference group (LHG, n=6), according to the preference for the arch hardness of the insole. Results: First, the range of motion (ROM) of inversion-eversion at the ankle joint during walking was statistically smaller in HAG than in LAG (p<.05). Second, the arch height change of HHG was statistically greater than that of MHG and LHG (p<.05). Conclusion: In the case of flexible flat feet with a large change in arch height, providing a high hardness arch insole that can disperse foot pressure can improve comfort. It was found that people with high medial and lateral sway of the ankle joint preferred a low arch insole, but it is necessary to differentiate and compare the insole heights of the arch part in detail. In addition, in the case of fast motion such as running, the preference for the arch height and hardness of the insole was not related to the static arch height and ankle stability.
게임 및 영화산업의 급속한 확장에 따라 CG(Computer Graphic)로 구현되는 3D 애니메이션 캐릭터에 대한 연구가 활발히 진행되고 있다. 특히, 삼차원으로 제작되는 캐릭터의 사실적인 움직임을 구현하기 위해서는 뼈와 폴리곤 면을 합쳐주는 리깅(Rigging) 작업과정을 거치게 된다. CG 관련 기술의 급속한 발전에 따라 리깅 작업 과정 또한 보다 정교해지고 있다. 하지만, 기술적인 발전에도 불구하고 여전히 리깅 작업 과정에서 시간적 비효율성, 단순 반복 작업 등의 한계점을 보이고 있다. 본 연구에서는 기존에 사용되는 캐릭터 리깅 방법의 문제점과 비효율성을 분석하고, 보다 효과적인 솔루션을 제안하고자 한다. 이를 위한 연구의 전개는 첫째, 리깅에 대한 일반적 작업과정과 스킨 웨이팅(Skin Weighting)에 대해 기술적 고찰을 하였다. 둘째, 기존 조인트(Joint)만 활용하여 스킨 웨이트(Skin Weight)를 하는 일반적 방법과 여기서 한 단계 발전된 방식으로 다양한 디포머(Deformer)를 활용한 웨이팅 방식을 비교 분석하였다. 셋째, 본 연구에서 제안하는 방법으로써, 디포머인 래티스(Lattice)를 활용하여 웨이팅하고 래티스를 사용한 디포머를 다시 스킨 웨이팅으로 변환하는 방법에 대해 실험연구를 진행한다. 넷째, 기존 방법과 본 연구에서 제안하는 방법에 대해 첫째, 웨이팅을 통해 형성된 지오메트리(Geometry)가 애니메이션의 순차적 움직임에 적절한 형태로 바뀌는지, 둘째, 두 개 이상의 지오메트리가 동시에 효과적으로 웨이팅이 되는지, 셋째, 효율적인 웨이팅 과정을 통한 작업시간의 단축이 이루어지는지를 중심으로 비교 분석하여, 본 연구에서 제시하는 스킨 웨이팅 방법의 효율성에 대해 검증한다. 본 연구를 통해 래티스를 활용한 스킨 웨이팅 작업 진행 결과, 웨이팅 작업과정의 핵심인 페인트 웨이트(Paint weight) 작업이 매우 효율적으로 진행되었으며, 작업시간의 단축 효과와 더불어 작업 결과물의 완성도도 매우 높음을 알 수 있었다. 본 실험연구를 통해 보다 효율적인 캐릭터 스킨 웨이트 방법이 관련 분야 전문가와 학술적 접근에 있어서 기초 자료로 활용되기를 기대한다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.