• 대한기계학회논문집
• /
• 제15권2호
• /
• pp.515-522
• /
• 1991

Determining the motion using optimal technique about traveling time and trajectory planning has been studied often in recent years, but the study of determining the optimal robot dimensions is rare, the authors attempt to find out the least driving torques and energy as the optimization of link length ratio referred to 2R SCARA and 3R robot manipulators. For the given linear path with triangular velocity profile, the inverse kinematic and dynamic problems are examined in order to lead into solution of problem, which is suggested for optimal design of link lengths. Accordingly, optimal link length ratio is obtained with respect to each case.

• 제어로봇시스템학회논문지
• /
• 제5권8호
• /
• pp.969-976
• /
• 1999

This paper is concerned with the generation of a balancing trajectory for improving the walking performance. The balancing motion has been determined by solving a second -order differential equation. However, this method caused some difficulties in linearizing and approximating the equation and had restrictions on using various balancing trajectories. The proposed difficulties in linearizing and approximating the equation and had restrictions on using various balancing trajectories. The proposed method i this paper is based on the genetic algorithm for minimizing the motins of balancing joints, whose trajectories are generated by the fifth-order polynomial interpolation after planning leg trajectories. The real walking experiments are made on the biped robot IWR-III, developed by our Automatic Control Laboratory. The system has 8 degrees of freedom and the structure of three pitches in each leg, and one roll and one prismatic joint in the balancing joints. The experimental result shows the validity and applicability of the new proposed algorithm.

• 제어로봇시스템학회지
• /
• 제1권1호
• /
• pp.16-16
• /
• 1995

Like the usual systems, the industrial robot manipulator has some constraints for motion. Usually we hope that the manipulators move fast to accomplish the given task. The problem can be formulated as the time-optimal control problem under the constraints such as the limits of velocity, acceleration and jerk. But it is very difficult to obtain the exact solution of the time-optimal control problem. This paper solves this problem in two steps. In the first step, we find the minimum time trajectories by optimizing cubic polynomial joint trajectories under the physical constraints using the modified evolution strategy. In the second step, the controller is optimized for robot manipulator to track precisely the optimized trajectory found in the previous step. Experimental results for SCARA type manipulator show that the proposed method is very useful.

• Transactions on Control, Automation and Systems Engineering
• /
• 제1권1호
• /
• pp.16-20
• /
• 1999

Like the usual systems, the industrial robot manipulator has some constraints for motion. Usually we hope that the manipulators move fast to accomplish the given task. The problem can be formulated as the time-optimal control problem under the constraints such as the limits of velocity, acceleration and jerk. But it is very difficult to obtain the exact solution of the time-optimal control problem. This paper solves this problem in two steps. In the first step, we find the minimum time trajectories by optimizing cubic polynomial joint trajectories under the physical constraints using the modified evolution strategy. In the second step, the controller is optimized for robot manipulator to track precisely the optimized trajectory found in the previous step. Experimental results for SCARA type manipulator show that the proposed method is very useful.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.683-691
• /
• 1997

This paper presents a new robot trajectory generation method based on the curvatre theory of ruled surfacees. robot trajectory is represented as a ruled surface generated by the TCP (Tool center point ) and any one unit vector among the tool frame (usually denoted O, A,N). The curvature theory of ruled surfaces provides the robot control algorithm with the motion property oarameters. The proposed method eliminates the necessity of approximation technic of either joint or cartesian interpolation. This technic may give new methodology of precision robot control. Especially this is very efficient when the robot traces an analytical or form surface if the surface is geometrically modelled.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.491-496
• /
• 1992

An analytic solution approach to the time-varying obstacle avoidance problem is pursued. We formulate the problem in robot joint space(JS), and introduce the view-time concept to deal with the time-varying obstacles. The view-time is a set of continuous times in which a time-varying obstacle is viewed and approximated by an equivalent stationary obstacle. The equivalent stationary obstacle is transformed into the JS obstacle. In JS, the path and trajectory avoiding the JS obstacle is planned.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.406-412
• /
• 1996

Optimal trajectory for a robot manipulator minimizing actuator torques or energy consumption in a fixed traveling time is obtained in the presence of obstacles. All joint displacements are represented in finite terms of Fourier cosine series and the coefficients of the series are obtained optimally by nonlinear programming. Thus, the geometric path need not be prespecified and the full dynamic model is employed. To avoid the obstacles, the concept of penalty area is newly introduced and this penalty area is included in the performance index with an appropriate weighting coefficient. This optimal trajectory will be useful as a geometric path in the minimum-time trajectory planning problem.

• 한국CDE학회논문집
• /
• 제7권1호
• /
• pp.34-41
• /
• 2002

Five-axis NC machining, in general, is utilized in fabricating impellers, turbine blades, marine propellers that can be machined more effectively rather than three-axis machining. There have been many researches concerning tool interference avoidance, optimization of tool orientation. The C-space or Configuration-space was originated from the robotics area, which depicts interference-free joint-values in motion planning. In the paper we propose an optimizing scheme by which the maximum effective-radius of a face-milling cutter can be achieved for each CC(cutter-contact) point. Also the concept of a C-space for a CC point, the effective-radius map for 5-axis face-milling, and some illustrative examples of marine propeller machining, are presented.

• 한국정밀공학회지
• /
• 제14권3호
• /
• pp.147-155
• /
• 1997

Optimal trajectory for a robot manipulator minimizing actuator torques or energy consumptions ina fixed traveling time is obtained in the presence of obstacles. All joint displacements are represented in finite terms of Fourier cosine series and the coefficients of the series are obtained optimally by nonlinear programming. Thus, the geometric path need not be prespecified and the full dynamic model is employed. To avoid the obstacles, the concept of the penalty area is newly introduced and this penalty area is includ- ed in the performance index with an appropriate weighting coefficient. This optimal trajectory will be useful as a geometric path in the minimum-time trajectory planning problem.

• Journal of Computational Design and Engineering
• /
• 제3권3호
• /
• pp.250-265
• /
• 2016

Owing to our rapidly aging society, accessibility evaluation to enhance the ease and safety of access to indoor and outdoor environments for the elderly and disabled is increasing in importance. Accessibility must be assessed not only from the general standard aspect but also in terms of physical and cognitive friendliness for users of different ages, genders, and abilities. Meanwhile, human behavior simulation has been progressing in the areas of crowd behavior analysis and emergency evacuation planning. However, in human behavior simulation, environment models represent only "as-planned" situations. In addition, a pedestrian model cannot generate the detailed articulated movements of various people of different ages and genders in the simulation. Therefore, the final goal of this research was to develop a virtual accessibility evaluation by combining realistic human behavior simulation using a digital human model (DHM) with "as-is" environment models. To achieve this goal, we developed an algorithm for generating human-like DHM walking motions, adapting its strides, turning angles, and footprints to laser-scanned 3D as-is environments including slopes and stairs. The DHM motion was generated based only on a motion-capture (MoCap) data for flat walking. Our implementation constructed as-is 3D environment models from laser-scanned point clouds of real environments and enabled a DHM to walk autonomously in various environment models. The difference in joint angles between the DHM and MoCap data was evaluated. Demonstrations of our environment modeling and walking simulation in indoor and outdoor environments including corridors, slopes, and stairs are illustrated in this study.