• Nuclear Engineering and Technology
• /
• 제48권5호
• /
• pp.1162-1173
• /
• 2016

In this paper, we describe a physicomathematical model of the processes that occur in a sodium circuit with a variable flow cross-section in the case of a water leak into sodium. The application area for this technique includes the possibility of analyzing consequences of this leak as applied to sodium-water steam generators in fast neutron reactors. Hydrodynamic processes that occur in sodium circuits in the event of a water leak are described within the framework of a one-dimensional thermally nonequilibrium three-component gas-liquid flow model (sodium-hydrogen-sodium hydroxide). Consideration is given to the results of a mathematical modeling of experiments involving steam injection into the sodium loop of a circulation test facility. That was done by means of the computer code in which the proposed model had been implemented.

• Advances in concrete construction
• /
• 제14권5호
• /
• pp.317-330
• /
• 2022

This paper investigated computationally and experimentally the interaction here between a notch as well as a micropore under uniaxial compression. Brazilian tensile strength, uniaxial tensile strength, as well as biaxial tensile strength are used to calibrate PFC2d at first. Then, uniaxial compression test was conducted which they included internal notch and micro pore. Experimental and numerical building of 9 models including notch and micro pore were conducted. Model dimensions of models are 10 cm × 10 cm × 5 cm. Joint length was 2 cm. Joints angles were 30°, 45° and 60°. The position of micro pore for all joint angles was 2cm upper than top of the joint, 2 cm upper than middle of joint and 2 cm upper than the joint lower tip, discreetly. The numerical model's dimensions were 5.4 cm × 10.8 cm. The fractures were 2 cm in length and had angularities of 30, 45, and 60 degrees. The pore had a diameter of 1 cm and was located at the top of the notch, 2 cm above the top, 2 cm above the middle, and 2 cm above the bottom tip of the joint. The uniaxial compression strength of the model material was 10 MPa. The local damping ratio was 0.7. At 0.016 mm per second, it loaded. The results show that failure pattern affects uniaxial compressive strength whereas notch orientation and pore condition impact failure pattern. From the notch tips, a two-wing fracture spreads almost parallel to the usual load until it unites with the sample edge. Additionally, two wing fractures start at the hole. Both of these cracks join the sample edge and one of them joins the notch. The number of wing cracks increased as the joint angle rose. There aren't many AE effects in the early phases of loading, but they quickly build up until the applied stress reaches its maximum. Each stress decrease was also followed by several AE effects. By raising the joint angularities from 30° to 60°, uniaxial strength was reduced. The failure strengths in both the numerical simulation and the actual test are quite similar.

• 한국산업정보학회논문지
• /
• 제20권3호
• /
• pp.81-86
• /
• 2015

본 논문에서는 인체의 CT/MRI에서 단층 촬영된 무릎관절을 영상처리 과정을 거쳐 3차원 관절 모델을 제작하였다. 실제 무릎관절의 형상을 추출할 때 설정 조건에 따라 3차원 형상정보가 달라질 수 있다. 이러한 미세한 3차원 형상정보의 차이에 따른 무릎관절의 구동특성을 분석하기 위해 2가지의 관절 모델을 3차원 프린터를 이용하여 제작하였다. 제작된 관절모델을 이용하여 관절구동 시 압축력 실험을 수행하였고 형상의 차이에 따라 결과값의 차이가 발생하였다. 따라서 생체모방형 바이오리액터를 개발할 경우에는 형상정보의 차이에 대한 연구가 선행되어야 할 것으로 사료된다.

• 지역사회간호학회지
• /
• 제28권1호
• /
• pp.55-68
• /
• 2017

Purpose: The purpose of this study is to develop and evaluate a joint health self-management program for knee osteoarthritis elders in communities. Methods: This program was developed based on the IMB (information-motivationbehavioral skills) model. The program methods include education, setting and achieving goals, sharing experiences, telephone counseling, and self-monitoring. The topics of the program include joint assessment, exercise, massage, joint protection, medication, depression management, diet, and healthcare approach. The research was conducted following the principles of the nonequivalent control group pretest-posttest design. Participants were 26 subjects in the experimental group, and 27 subjects in the control group. The experimental group participated in the self-management program, and the control group received general education. Results: Both post-test scores of personal motivation, social motivation, behavior skill, self-management behavior, joint pain, joint stiffness, physical function disability, right knee extension, left knee extension, and depression were significantly different between the experimental group and the control group. Conclusion: The results of the study can be used to develop and standardize a systematic joint health self-management program. Further research is highly recommended to develop a strategy to continuously facilitate self-management of osteoarthritis patients' procedures.

• 한국공작기계학회논문집
• /
• 제14권5호
• /
• pp.62-73
• /
• 2005

The objects of this research are to establish the criteria of peel occurrence considering the shape of bond terminus and to compare the strength properties of adhesive joint of different three type such as butt joint, T-shape, and single lap Joints. The criteria of peel occurrence at the bond terminus was suggested. Peel loads of three type adhesive joint (butt Joint, T-shape specimen, single lap joint) were determined from tensile tests. Principal stress distributions of these joints were determined from finite element method analysis. Then, peel occurrence was estimated with stress singularity factor$(K_{prin})$ when the terminus shape was square, with average principal stress when the terminus shape was rounded. The conclusions are summarized as follows; (1) In the non-filleted model(e.g., butt joint, T-shape specimen), principal stress shows singularity at the bond terminus, intensity of stress(principal stress) singularity $(K_{prin})$ can use as the criteria of peel occurrence at the bond terminus. (2) In the filleted model(e.g., single lap joint), principal stress has not affected singularity at the bond terminus. Average principal stress$(K_{av})$ can use as the criteria of peel occurrence at the bond terminus.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.365-370
• /
• 2004

Generally, component and FR-4 board are connected by solder joint. Because material properties of components and FR-4 board are different, component and FR-4 board show different coefficients of thermal expansion (CTE) and thus strains in component and board are different when they are heated. That is, the differences in CTE of component and FR-4 board cause the dissimilarity in shear strain and solder joint' failure. The first order Taylor series expansion of the limit state function incorporating with Tresca failure criterion is used in order to estimate the failure probability of solder joints under heated condition. Using shear stresses and shear strains appeared on the solder joint, we estimate the failure probability of solder joints with the Tresca failure criterion. The effects of random variables such as CTE, distance of the solder joint from the neutral point(DNP), temperature variation and height of solder on the failure probability of the solder joint are systematically studied by using the failure probability model with first order reliability method(FORM).

• Earthquakes and Structures
• /
• 제25권4호
• /
• pp.283-296
• /
• 2023

This paper presents experimental and numerical studies of seismic performance on reinforced concrete (RC) wide beam (WB) joints. Two RC-WB joint specimens and one conventional RC joint specimen were fabricated using the reinforcing details of longitudinal reinforcing bars in a beam as a variable, and quasi-static cyclic loading tests were performed. The results were used to compare and analyze the load-drift ratio relationship, failure mode, and seismic performance of the specimens quantitatively. In addition, a finite element (FE) analysis of the RC-WB joint was conducted, and the rationality of the FE model was validated by comparing it with the test results. Based on the FE model, a parametric study was conducted, where the ratio of longitudinal reinforcing bars placed on the outer and inner parts of the joint (𝜌_ex/𝜌_in) was a key variable. The results showed that, in the RC-WB joint, an increase of 𝜌_ex/𝜌_in leads to more severe damage to concrete, which reduces the seismic performance of the RC-WB joints.

• 국제강구조저널
• /
• 제18권4호
• /
• pp.1373-1383
• /
• 2018

Experimental study was conducted to investigate the seismic behavior of roof joint. Eight full-scale specimens were tested considering the effects of axial force, joint height, hole shape of base plate and edge distance of concrete on the failure mode and resistance capacity of roof joint. With the increase of axial force, the hysteretic curves were fuller. The mechanical model of roof joint change from bending to shear. With the increase of joint height, the ultimate strength of roof joint decreased. If the hole shape of base plate changed from circle to loose, the slip behavior of roof joint appeared and the ultimate strength of roof joint decreased. The damage of edge concrete may occur if the edge distance of concrete was not big enough.

• 콘크리트학회지
• /
• 제8권2호
• /
• pp.139-150
• /
• 1996

본 연구의 목적은 프리캐스트 콘크리트(PC) 대형판 구조물의 축소모델 제작 및 실험기법에 관한 정보을 제공하는 것이다. 적용된 축소율은 1/5이며, 4가지의 실험이 수행되었다. : 모델 콘크리트와 모델 철근의 재료실험, 수평접합부의 압축실험, 수직접합부의 전단실험, 2층 부분구조물의 정적 주기 실험, 이들 실험결과를 기초로 다음의 결론을 도출하였다. : (1)모델 콘크리트는 일반적으로 예상보다 압축강도가 크게 나타났다. (2)모델 철근은 진공관을 사용하지 않고 열처리를 할 경우 연성의 저하를 보인다. (3)수평접합부와 수직접합부의 파괴모드는 실물크기와 모델이 거의 유사하였으나. 모델의 강도는 상사법칙에 의한 요구강도보다 크게 나타났다. (4) 실물크기와 유사하게 모델철근의 연성과 모델 콘크리트의 압축강도를 확보할 수 있다면, 1/5모델 부분구조물의 이력거동은 실물크리와 매우 근접되게 나타낼 수 있다.

• 응용통계연구
• /
• 제33권2호
• /
• pp.123-136
• /
• 2020

하나의 개체에서 여러가지 측정치가 동시에 관찰되는 경우는 다양한 연구 분야에서 흔히 나타난다. 발달 독성학 연구에서는 특정 독성 물질의 각기 다른 수준에 노출된 임신한 어미 쥐에 대해 기형인 태아의 존재와 태아의 무게가 동시에 측정된다. 이런 두 변수를 결합하여 모형화하는 것은 각기 독립적인 두 모형으로 분석하는 것보다 더 효율적인 결과를 낸다고 알려져 있다. 대부분의 결합 모형은 정규분포를 랜덤효과로 가정하여 분석한다. 그러나 발달 독성학 연구에서처럼 반응변수들의 분포가 독성 물질이 변함에 따라 불규칙하게 변하는 경우 정규분포의 가정으로는 그 특징을 잡아낼 수 없게 된다. 본 논문에서는 이진수 자료와 연속형 자료에 대해 비대칭 로짓 모형을 사용한 베이지안 결합모형을 제시한다. 본 모형은 비대칭 로짓 모형을 사용함으로써 반응변수의 분포의 형태가 독성 물질의 수준에 따라 대칭/비대칭의 형태를 자유롭게 띨 수 있는 장점을 가지고 있다. 모형의 적합성을 살펴보기 위해 발달 독성학 연구에서 독성 물질 DEHP에 적용하여 그 결과를 확인해본다.