• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.5
• /
• pp.812-814
• /
• 2015

In this letter, a distributed self-organized cell association scheme is proposed for heterogeneous cellular networks. In which each small cell uses a common self-organization strategy and takes its environment into account to establish its own cell association scheme. It is confirmed that the proposed cell association improves the user throughput and areal spectral efficiency compared to joint association.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.12
• /
• pp.1345-1354
• /
• 2015

This paper, information communication code standard($KS{\times}1001$, confirmation in 2004), as definded in Hangul Character Code Hangul AMI/HDB-3 the code set for the new system Hangul consonant and vowel tables presented. The result of the existing system and the code set ($4{\times}4$) bit source coding rules for comparing the frequency of use Hangul consonant and vowel tables(The National Institute of The Korea Language) and statistices showed that 44% of the data processing efficiency is improved.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.412-417
• /
• 2005

To ensure the safety of the tunnelling without the loss of economy, the tunnel seismic profiling(TSP) method for the prediction ahead of tunnel face, begins to be used routinely in these days. TSP method does not interfere the tunnelling works while the horizontal drilling does, and its prediction length is longer than that of the drilling. Yet the most frequently adopted technique of TSP in Korea is the multi-shot and 2 receiver array using in-hole receivers, even though this array requires as many as 26 drill-holes for receiver installation and ballasting, which results in 3-6 hours of suspension in excavation work. In this paper, multi-receiver and lesser shot array using side-wall attached 3 component geophones is to be described to prove the efficiency in terms of the survey time as well as the reliability of the method by comparison of the predicted weak points and the face mapping results. The predictions mostly agreed with the real fractures or joint developed zones which have been confirmed during the excavation. It also has been found that TSP method can be effectively applied to perform draining ground water ahead of tunnel face by imaging the geologic discontinuities.

• The Journal of Fisheries Business Administration
• /
• v.44 no.1
• /
• pp.39-57
• /
• 2013

This study aims to examine problems of retail business operated by primary fisheries cooperatives and provide some suggestions for enhancing their retail business function. It reveals that although sales business function of fisheries cooperatives is very important for the members of Korean fisheries cooperatives, their performance and efficiency outcomes have been disappointing. The research offers six suggestions in two categories to resolve the issues. In the first category as a marketing plan for retail business of primary fisheries cooperatives, first, enhance of marine products business using local specialty goods. second, expanded of on-line shopping mall and third, joint marketings among primary cooperatives are necessary. In second category as an assistance plan of National Federation of Fisheries Cooperatives(NFFC) for primary fisheries cooperatives, First, we needed to making logistics system for fisheries. Second, conducting retail business consulting for primary fisheries cooperatives. Finally, human resource development programs are needed. Primary fisheries cooperatives have to discipline faithfully as a cooperatives for NFFC roles as a cooperatives. So making marine products sales business as a core of a economy business of primary fisheries cooperatives in Korea is very important.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.2
• /
• pp.235-242
• /
• 2008

An Autonomous mobile robot is a very useful system to achieve various tasks in dangerous environment, because it has the higher performance than a fixed base manipulator in terms of its operational workspace size as well as efficiency. A method for estimating the position of an object in the Cartesian coordinate system based upon the geometrical relationship between the image captured by 2-DOF active camera mounted on mobile robot and the real object, is proposed. With this position estimation, a method of determining an optimal path for the autonomous mobile robot from the current position to the position of object estimated by the image information using homogeneous matrices. Finally, the corresponding joint parameters to make the desired displacement are calculated to capture the object through the control of a mobile robot. The effectiveness of proposed method is demonstrated by the simulation and real experiments using the autonomous mobile robot.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.531-534
• /
• 2007

In the current domestic design-build contract, design and construction are separated due to prohibition of outside work. but instead the design-build contract adopts a method of fulfilling each assignment as a joint venture, which makes it difficult for participants to communicate each other and often require changes of design. also, It is difficult to performance efficiency project that they don't want to share useful information related to design and construction. In this study suggests how to maxmize the effiency of the project by proposing a process model connected with an efficient partnering and constructability in a deign development phase of design-build constract.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.1
• /
• pp.51-59
• /
• 2004

We design multilevel coding(MLC) with a semi bit-interleaved coded modulation(BICM) scheme based on low density parity check(LDPC) codes. Different from traditional designs, we joint the MLC and BICM together by using the Gray mapping, which can transmit the multimedia data over several equivalent channels with different code rates. To get a good performance from signal-to-noise ratio(SNR) very close to the capacity of the additive white Gaussian noise(AWGN) channel, random regular LDPC code and a simple semi-algebra LDPC(SA-LDPC) code are discussed in MLC with parallel independent decoding(PID). Finally, the numerical results demonstrate that the proposed scheme could achieve both power and bandwidth efficiency for multimedia communication system.

• Journal of Welding and Joining
• /
• v.23 no.5
• /
• pp.25-29
• /
• 2005

Steel has been mainly used in the automotive industry, because of good mechanical properties, weldability and so on. However, there has been increase in using aluminum to reduce the weight of vehicle. This leads to improve fuel efficiency and to reduce air pollution. A steel-aluminum hybrid body structure is recently used not only to reduce the weight of vehicle but also to increase safety. In this paper, the laser beam joining method is suggested to join steel and aluminum. To avoid making brittle intermetallic compounds(IMC) that reduce mechanical properties of the joint area, only aluminum is melted by laser irradiation and wetted on the steel surface. The brittle IMC layer is formed with small thickness at the interface between steel and aluminum. By controlling the process parameters, brittle IMC layer thickness is suppressed under 10 micrometers which is a criterion to maintain good mechanical properties.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.10
• /
• pp.2008-2017
• /
• 2002

Joint structure of a transducer horn-holder assembly fur a wire bonder was examined through FEM contact analysis. A three dimensional modeling and analysis was carried out to survey the internal physics of this structure and to prove the accuracy of a computation compared to a measurement. After validation, a simple two dimensional model was built fur various parametric study considering the efficiency and speed of the computation. Several factors such as boundary conditions, a modeling boundary, mesh density and so on, were considered to obtain consistency with three dimensional analysis. An arc angle and a position of each holder boss were chosen as design parameters. A design of experiment was applied to find out an optimized design of the holder geometry. As a result, a guideline for holder boss design was suggested and main factors and their influence on stress concentration in the transducer horn were surveyed.

• Journal of Korean Society of Rural Planning
• /
• v.24 no.4
• /
• pp.89-97
• /
• 2018

This is a comparative study on the policy of Korea and Japan for improving upland farming mechanization. Purpose of the study is to set a policy direction of improving efficiency of farm management by using agricultural machinery. Research topic is the agricultural mechanization policy at the national level. The research attempts to classify mechanization policies into framework plan, R&D, rent and lease program, upland farm promotion policies. Major features of the comparative analysis are followed. First, there is a similarity between policies of Korea and Japan in terms of the aim of framework plan and other policies settings. However, Japanese policies focus more on the joint management of farming than Korean policies. Japanese policies take an entire system covering from farm to market into account. Second, Japanese policies have much attention to the agricultural organizations such as corporate, cooperatives that are eligible for using agricultural machinery. This is different from Korean policy. Thus, upland farming mechanization policy needs to set priority, and to have systemic approach. Also, upland farming mechanization policy has to be facilitated in accordance with producer organizations and their marketing strategies.