• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.704-708
• /
• 2004

The RMD(Rehabilitation Medicine Device) with CJM(Compound Joint Motion) is the lower limb unit muscular strengthening promotion rehabilitation medicine device for patients of joint orthopedic operation or the deficient elder of ability to walk, the handicapped. Since the products for the rehabilitation medicine device have limited to the simplicity linear motion, those do not give efficient the lower unit muscular strengthening effects. This device which was under the development gives to exercise of hip joint and knee joint with user's selection at once, get out of the simplicity linear motion. Also it will be contributed to a field of rehabilitation medicine and a mobility aid technology of the deficient elders of ability to walk, the handicapped.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1662-1665
• /
• 2004

A real-time joint transform correlator by using JPEG-compressed reference images is proposed as practical solution to storage problem and improvement of processing time of automatic target recognition system [1]. Effects of compression on recognition performance of join transform correlator are quantitatively investigated under situations where the target is suffered from noise and has contrast difference with respect to the reference. Two images with different spatial-frequency contents and contrast were used as the test scenes. The simulation results show that, the recognition performance of joint transform correlator by using the compressed reference images with high spatial-frequency components is more sensitive to noise and contrast difference than the low spatial-frequency image.

• Geomechanics and Engineering
• /
• v.19 no.6
• /
• pp.523-532
• /
• 2019

Based on the formation characteristics, wellbore parameters and insulated tubing (IT) parameters of the Shengli oilfield, Shandong, China, a geomechanical model is built to predict the temperature distributions of the wellbore and formation. The effects of the IT heat conductivity coefficient (HCC), well depth and IT joint on the temperature distribution of the IT, completion casing, cement sheath, and formation are investigated. Results show the temperature of the formation around the wellbore has an exponentially decreasing relation with the distance to the wellbore. The temperature of the formation around the wellbore has an inverse relation with the IT HCC when the temperatures of the steam and the formation are given. The temperature of the casing outer wall is mainly determined by the steam temperature and IT HCC rather than by the initial formation temperature. The temperature of the casing at the IT joint is much larger than that of the other location. Due to the IT joint having a small size, the effects of the IT joint on the casing temperature distribution are limited to a small area only.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.793-798
• /
• 1996

In this paper, output compliance effects at RCC point by both redundant joint compliances and antagonistic torques generated by internal preloading between joints of a spherical 3 degree-of-freedom mechanism are investigated. For this purpose, kinematic analysis is briefly described. Then, output compliance models at RCC point, which is generated by redundant joint compliances and by internal preloading between joints are derived. Finally, ranges of output compliance modulation due to these redundant joint compliances and antagonistic torques are examined through simulation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.1 no.2
• /
• pp.151-156
• /
• 1997

An experimental study was performed on the pull-out behavior of 90-deg standard hooks from exterior beam-column connections. The effects of the number of hooked bars of joint area were investigated. Under the pull-out action of hooked bars, the damage and cracking of joint area tends to be more extensive as the number of hooks pulling out from a joint increases. The pull-out strength and post-peak ductility of hooked bar are adversely influenced by the increase in number of hooks pulling out from an exterior joint. Current hooked bar anchorage design guidelines may be improved by considering the effect of the number of hooked bars on anchorage conditions at exterior joints.

• Computers and Concrete
• /
• v.26 no.3
• /
• pp.239-255
• /
• 2020

Experimental and discrete element method were used to investigate the effects of joint number and its angularities on the shear behaviour of joint's bridge area. A new shear test condition was used to model the gypsum cracks under shear loading. Gypsum samples with dimension of 120 mm×100 mm×50 mm were prepared. the length of joints was 2cm. in experimental tests, the joint number is 1, 2 and 3 and its angularities change from 0° to 90° with increment of 45°. Assuming a plane strain condition, special rectangular models are prepared with dimension of 120 mm×100 mm. similar to joints configuration in experimental test, 9 models with different joint number and joint angularities were prepared. This testing show that the failure process is mostly governed by the joint number and joint angularities. The shear strengths of the specimens are related to the fracture pattern and failure mechanism of the discontinuities. The shear behaviour of discontinuities is related to the number of induced tensile cracks which are increased by increasing the rock bridge length. The strength of samples decreases by increasing the joint number and joint angularities. Failure pattern and failure strength are similar in both of the experimental test and numerical simulation.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.5
• /
• pp.229-240
• /
• 1999

The groundwater flow and grout flow in individual rock joint and jointed rock mass are studied using various methods of analysis such as (i) the finite difference method, (ii) channel network analysis and (iii) joint network analysis. The flow behaviour is investigated in two distinguishable scales of observation: one for a rough joint of a laboratory scale having variable aperture, and the other for field- scale rock masses having three sets of intermittent joints. In the former case, the aperture-dependent channel flow is identified for both water and grout flows. The comparison of the flow rate in a rough joint is made between the finite difference analysis and existing analytical solution. In the latter case, the effects of increasing number of joints on the groundwater inflow into a circular opening of various diameters are analyzed using both the joint network method and Goodman's analytic solution. Comparisons are made between the two methods. The boundary effects in the joint network method are discussed. The inhomogeneity of joint network and its impacts on the groundwater inflow are also discussed.

• Journal of International Academy of Physical Therapy Research
• /
• v.6 no.1
• /
• pp.824-827
• /
• 2015

The purpose of this study was to investigate the effects of joint position on the distraction distance in patients with adhesive capsulitis of glenohumeral joint. The study was conducted upon 20 adults in their 40's with the findings of adhesive capsulitis of glenohumeral joint. These subjects were subdivided into 3 groups, which were a group with neutral position(n=7), second group with resting position(n=7) and third group with end-range position(n=6). After having the subject wearing sleeveless shirts exposing armpit and lying straight on the plinth, a physical therapist with OMT qualification pulled glenohumeral joint at the Grade III of Kaltenborn-Evjenth traction; and the distance between glenoid fossa and humeral head was measured with ultrasound. Following the application of traction, the group with resting position($.67{\pm}0.29$) exhibited the longest distance between humeral head and glenoid fossa, and it was followed by neutral position($.50{\pm}0.25$) and end-range position($.35{\pm}.21$) in this order. From the comparison of these groups, there was no significant difference in distraction distance between resting position and neutral position; and there was again no significant difference in distraction distance between end-range position and neutral position. However, there was a significant difference in distraction distance between end-range position and resting position(p<.05). Upon application of the Grade III of Kaltenborn-Evjenth traction, it was evident that the distance between humeral head and glenoid fossa can be varied depending on the location of the joint.

• Journal of The Korean Society of Integrative Medicine
• /
• v.8 no.3
• /
• pp.1-10
• /
• 2020

Purpose : The purpose of this study is to analyze the corrective effect of the general coordinative manipulation (GCM) joint intervention model on distort leg with imbalance of the lower extremity joints, pelvic and shoulder girdles, and lumbar spine. Methods : The study used a comparative analysis of the size of the distort leg and the imbalance of the lower extremity joints, pelvic and shoulder girdles, and lumbar spine before and after the application of the GCM joint intervention model. A total of 31 subjects from movement center G and the department of physical therapy at university M were selected as research subjects, and they were divided into two groups. The GCM joint intervention model was applied to 18 subjects in the bow knee group and 13 subjects in the knock knee group. The two groups received daily intervention three times a week for four weeks. The corrective effect of the GCM joint intervention model for each type of distort leg was compared and analyzed. Results : The effects of the GCM joint intervention model in correcting bow knee and knock knee with knee deformation and imbalance of the lower extremity joints, pelvic and shoulder girdles, and lumbar spine were significant in most domains (p<.05). The correlation between the bow knee and knock knee groups showed significance in most domains (p<.05). Conclusion : The GCM joint intervention model showed significant corrective effect in the bow knee and knock knee groups in terms of knee deformation, lower extremity joints, pelvic and shoulder girdles, and lumbar spine (p<.05).

• Journal of Korean Medicine Rehabilitation
• /
• v.20 no.3
• /
• pp.75-91
• /
• 2010

Objectives : Although the controversy surrounding the biomechanics of the sacroiliac joint remains unresolved at this time, the clinical importance of this joint in the cause of back pain has been established since 1930's. Recently, there has been renewed interest in the sacroiliac joint. This study was performed to evaluate the effects of pulsed electromagnetic therapy(PEMT) with acupuncture therapy for patients, who were suffering from sacroiliac joint syndrome, and to conduct more researches in the usage of acupuncture therapy for treating sacroiliac joint syndrome. Methods : 25 patients, who were diagnosed as sacroiliac joint syndrome were selected. They were treated twice a week during 3 weeks. They were measured after all the treatment and firs week and fourth week after termination of treatment by using visual analogue scale(VAS) and Roland Morris disability index(RMDI). The VAS and RMDI patterns were analyzed by using 'pared T-test' and 'Kruskal-Wallis' test. Results : 1. Each times of PEMT with acupuncture therapy, there were statistical significance in improvement of VAS(p<0.05) and each times of therapy except 1st one, there were statistical significance in improvement of RMDI(p<0.05). 2. After 4th therapy, there were most significant improvement of VAS with RMDI(p<0.001), when we compared the change in VAS and RMDI before and after the each therapy. 3. There was no statistical significance in VAS and RMDI by onset, sex and age. Conclusions : The results indicate that pulsed electromagnetic therapy and acupuncture therapy had good effect on sacroiliac joint syndrome.