• Title/Summary/Keyword: joint effect

Search Result 2,984, Processing Time 0.031 seconds

The Prevention Effect of Seawater Penetration of Gel Coat Applied in Repair of FRP Fishing Vessel (FRP 어선 보수에 적용되는 겔코트의 해수 침투 방지 효과)

  • Kang, Dae Kon;Park, Jai Hak
    • Journal of the Korean Society of Safety
    • /
    • v.33 no.6
    • /
    • pp.15-21
    • /
    • 2018
  • Ships may collide with reefs or other objects during operation, when arriving or departing ports. The hull plate may be damaged due to the contact with other ships. The total number of domestic powered fishing vessels has decreased, but that of FRP fishing vessels has increased by 0.7% and the ratio of FRP fishing vessels to the total fishing vessels increased to 96%. Recently, fishing vessels has been used as fishing boats for income of non-fishermen as well as fishermen. Therefore, safety management for repair and maintenance is necessary. The penetration of moisture and moisture in the composite material such as FRP may deteriorate the mechanical properties and the salt (NaCl) component of the damaged portion may cause a relatively high deterioration in material strength. The gel coat painting is the final stage of repairs ans maintenance of FRP fishing vessels. The thickness criteria in the domestic and foreign gel coat is 0.3~0.762 mm. The joint specimens, which was immersed in seawater for 120 days, were compared with those without seawater immersion. As a result, the tensile strength was 83 ~ 121.8% and the flexural strength was 83 ~ 113% compared with the specimens without seawater immersion. According to the previous study the tensile strength decreased by more than 29% and the flexural strength decreased by more than 50% when the composite material was immersed in seawater for 1,083 hours without coating. As a result, it was found that the gel coat with 0.5 mm thickness is very effective in preventing the strength decrease of the composite material.

Combined seismic and energy upgrading of existing reinforced concrete buildings using TRM jacketing and thermal insulation

  • Gkournelos, Panagiotis D.;Bournas, Dionysios A.;Triantafillou, Thanasis C.
    • Earthquakes and Structures
    • /
    • v.16 no.5
    • /
    • pp.625-639
    • /
    • 2019
  • The concept of the combined seismic and energy retrofitting of existing reinforced concrete (RC) buildings was examined in this paper through a number of case studies conducted on model buildings (simulating buildings of the '60s-'80s in southern Europe) constructed according to outdated design standards. Specifically, seismic and thermal analyses have been conducted prior to and after the application of selected retrofitting schemes, in order to quantify the positive effect that retrofitting could provide to RC buildings both in terms of their structural and energy performance. Advanced materials, namely the textile reinforced mortars (TRM), were used for providing seismic retrofitting by means of jacketing of masonry infills in RC frames. Moreover, following the application of the TRM jackets, thermal insulation materials were simultaneously provided to the RC building envelope, exploiting the fresh mortar used to bind the TRM jackets. In addition to the externally applied insulation material, all the fenestration elements (windows and doors) were replaced with new high energy efficiency ones. Afterwards, an economic measure, namely the expected annual loss (EAL) was used to evaluate the efficiency of each retrofitting method, but also to assess whether the combined seismic and energy retrofitting is economically feasible. From the results of this preliminary study, it was concluded that the selected seismic retrofitting technique can indeed enhance significantly the structural behaviour of an existing RC building and lower its EAL related to earthquake risks. Finally, it was found that the combined seismic and energy upgrading is economically more efficient than a sole energy or seismic retrofitting scenario for seismic areas of south Europe.

Effects of Manual Lymphatic Drainage and High Frequency Diathermy on Pain, Volume, Function of Upper Extremity and Quality of Life in Breast Cancer Patients with Axillary Web Syndrome : a Study of Five Case Reports (겨드랑이막증후군을 가진 유방암 환자들의 도수림프배출법과 고주파 투열치료가 통증, 부피, 기능 및 삶의 질에 미치는 효과 : 사례군 연구)

  • Ahn, Soo-Yeon;Shin, Won-Seob
    • Journal of The Korean Society of Integrative Medicine
    • /
    • v.9 no.4
    • /
    • pp.19-28
    • /
    • 2021
  • Purpose : The purpose of this study was to apply manual lymphatic drainage (MLD) and high-frequency diathermy (HFD) to patients with axillary web syndrome (AWS), one of the side effects of breast cancer surgery, and to treat upper extremity pain, volume, function of the upper extremity, (joint range of motion; ROM, disabilities of the arm, shoulder and hand; DASH) and quality of life before and after treatment. It is to determine the effect of treatment by checking the level change. Methods : This study is a case series. A total of 5 patients diagnosed with AWS after breast cancer surgery voluntarily participated in this study. The intervention program consisted of stretching, MLD and HFD. It was conducted 3 times a week for 30 minutes for 4 weeks. In order to compare the effects of pain (numeric pain rating scale; NPRS), volume, upper limb function (ROM, DASH) and quality of life (the European organization for research and treatment of cancer quality of life questionnaire-breast, EORTC QLQ-BR23) evaluations were compared before and after 4 weeks of intervention. All measured variables were analyzed and expressed as mean, standard deviation and percentage. Results : The shoulder NPRS level of the subjects in all case groups decreased, the volume decreased and the shoulder flexion, abduction ROM increased. It showed improvement in DASH and quality of life, QLQ-BR23. Conclusion : After breast cancer surgery, we confirmed the possibility that MLD and HFD treatments could be effective in improving pain, decreasing volume, increasing upper extremity function, and quality of life for patients who have difficulties with AWS. The possibility has been confirmed, and additional research is needed by increasing the number of participants in the experiment in the future.

Factors Affecting the Choice of Banks: Do Bank's Interest Rate, Employee Image and Brand Matter?

  • DAO, Le Kieu Oanh;LOC, Huynh Huu;NGUYEN, Van Chien;HANG, Le Thi Thuy;DO, Thi Tuyet
    • The Journal of Asian Finance, Economics and Business
    • /
    • v.8 no.1
    • /
    • pp.457-470
    • /
    • 2021
  • The banking system provides a number of important functions for the economy and is also the lifeblood and financier of the economy in each country. Large amounts of idle money have not been exploited by banks; however, banks still depend on loans, including loans from foreign banks, to meet the growing demand, as such, for banks, the cost of capital is high, the stability and business efficiency are low and banks have not promoted their internal resources to grow steadily. To achieve the goal, this research analyzes the factors affecting the choice of bank for the deposit decisions of customers in Vietnam. The study used a sample data of 250 individuals and SPSS software was used to analyze the data. The results showed that customer policy has a positive effect on customers' deposit decisions in a bank, and this is new evidence regarding behavioral theory in the case of Vietnam. Results further demonstrated that other factors such as employee image, brand, interest rate, relative influencing, and transaction time positively impact the choice of bank for the deposit decisions of customers. However, the bank's promotion strategies had no impact on the choice of bank for the deposit decisions of customers. Besides, employee image is the most influential factor in the deposit decisions, followed by the bank's brand and interest rate.

Influence of Financial Literacy and Educational Skills on Entrepreneurial Intent: Empirical Evidence from Young Entrepreneurs of Pakistan

  • BILAL, Muhammad Ahmed;KHAN, Hadi Hassan;IRFAN, Muhammad;Ul HAQ, S.M. Nabeel;ALI, Manzoor;KAKAR, Ali;AHMED, Wahab;RAUF, Abdul
    • The Journal of Asian Finance, Economics and Business
    • /
    • v.8 no.1
    • /
    • pp.697-710
    • /
    • 2021
  • This paper attempts to study the impact of Financial Literacy on Youth Entrepreneurial Intent in Pakistan. A closed-ended self-administered structured questionnaire covering financial literacy, computer knowledge, financial attitude, and financial knowledge with Entrepreneurial Intent was collected from young entrepreneurs. The research tried to investigate the education level with computer skill to inspect the effect of financial literateness on young generation Entrepreneurial Intent in the context of Pakistan. The research model was tested using PLS-SEM and authenticating a measurement model through the advanced methodology and their association with Entrepreneurial Intent. Results revealed that financial literacy and its two parts (financial attitude and financial knowledge) have a positive impact on Entrepreneurial Intent. The size of the joint impact of financial literacy and its components on Entrepreneurial Intent was assessed to be adequate. Entrepreneurial Intent is essential for creating new firms to maintain economic development. Furthermore, it is determined in this research that if youth has better financial knowledge and financial attitude, the probability of Entrepreneurial Intent increases. This suggests that if the youth in Pakistan desire to attain a higher limit of Entrepreneurial Intent, they must implement financial literacy models for enhancing and promoting their current Entrepreneurial Intent.

Seismic fragility analysis of a cemented Sand-gravel dam considering two failure modes

  • Mahmoodi, Khadije;Noorzad, Ali;Mahboubi, Ahmad
    • Computers and Concrete
    • /
    • v.26 no.6
    • /
    • pp.483-495
    • /
    • 2020
  • Dams are vital infrastructures that are expected to maintain their stability during seismic excitations. Accordingly, cemented material dams are an emerging type, which are being increasingly used around the world owing to benefiting from advantages of both earth-fill and concrete gravity dams, which should be designed safely when subjected to strong ground motion. In the present paper, the seismic performance of a cemented sand and gravel (CSG) dam is assessed using incremental dynamic analysis (IDA) method by accounting for two failure modes of tension cracking and base joint sliding considering the dam-reservoir-foundation interactions. To take the seismic uncertainties into account, the dam is analyzed under a suite of ground motion records and then, the effect of friction angle for base sliding as well as deformability of the foundation are investigated on the response of dam. To carry out the analyses, the Cindere dam in Turkey is selected as a case study, and various limit states corresponding to seismic performance levels of the dam are determined aiming to estimate the seismic fragilities. Based on the results, sliding of the Cindere dam could be serious under the maximum credible earthquake (MCE). Besides, dam faces are mostly to be cracked under such level of intensity. Moreover, the results indicate that as friction angle increases, probability of sliding between dam and foundation is reduced whereas, increases tensile cracking. Lastly, it is observed that foundation stiffening increases the probability of dam sliding but, reduces the tensile damage in the dam body.

Proposal of finger splint design using design guidelines to reflect user requirements - Using FDM 3D printing technology - (사용자의 요구조건을 반영 할 수 있는 디자인 가이드라인을 이용한 손가락 보조기 디자인 제안 - FDM 방식의 3D 프린팅 기술을 이용하여 -)

  • Shin, I Yeol;Oh, Kwang Myung
    • Design Convergence Study
    • /
    • v.18 no.3
    • /
    • pp.1-14
    • /
    • 2019
  • General finger splint manufactured and sold domestically could have been of great help to patients with disabilities due to damage to the body's. However, it reminded the wearer of his disability that he wanted to hide. This has had a negative effect on the psychological side of self-absorption and depression. If this avoids or rejects wearing, the role of ancillary rehabilitation is lost. This does not meet the user's requirements. Thus, in this study, 3D printing was used to better reflect user requirements. Next, the study examined existing prior studies to identify the characteristics and criteria of each study. It also examined medical finger aids that were being sold in the auxiliary device market. The assessment criteria were derived by compiling and interpreting user surveys of each finger splint device. Based on the evaluation criteria derived, the design guidelines for finger splint were presented using FDM-style 3D printers. Finally, we proposed a finger splint design according to the proposed design guideline.

Analysis of the Effect of Construction of Public Cremation Facilities in Jeongeup City on Cremators Number Using E-Haneul Funeral Information System in Jeollabukdo and on Cremation Rate

  • Choi, Jae-sil;Kim, Jeong-lae
    • International journal of advanced smart convergence
    • /
    • v.10 no.1
    • /
    • pp.117-124
    • /
    • 2021
  • Based on a result of we research and analysis of this study, it was analyzed that the average annual cremators number using E-Haneul Funeral Information System among the five public cremation facilities in Jeollabukdo was 9,713 in total before the opening of public creation facilities in Jeongeup City (2013-2015), while the number was 12,159 after the opening of public cremation facilities in Jeongeup City (2016-2019); the number was increased by 2,446, compared to the opening period (2013-2015), with a large increase rate of 25.2%. In addition, the average annual cremation rate before the opening of public cremation facilities in Jeongeup City (from 2013 to 2015) was 71.6%, but the average annual cremation rate during the period after the opening (from 2016 to 2019) was 81.5%, which was a large increase rate of 9.9% compared to period before the opening of the facilities. Based on research results above, we have presented policy suggestions in order to increase the efficiency of operation and management of public cremation facilities by local governments as follows. First, in order to prepare for the increase in demand for cremation due to the increase in cremators number, a policy promotion for the expansion of "public cremation facilities" should be carried out as soon as possible, focusing on local governments whose supply has reached the limit. Second, in order to support the expansion and construction of public cremation facilities, the government subsidy rate and government subsidy at the level of current 70%, provided by the central government, should be further expanded. Third, overcoming theNIMBY conflict overlocation for public cremation facilities, theutilization rate should be enhanced, through the joint construction and facility operation of the public cremation facilities between local governments, and the ef iciency of the project implementation should be improved through the jointsharing of the facility operation cost.

Effect of High-frequency Diathermy on Hamstring Tightness

  • Kim, Ye Jin;Park, Joo-Hee;Kim, Ji-hyun;Moon, Gyeong Ah;Jeon, Hye-Seon
    • Physical Therapy Korea
    • /
    • v.28 no.1
    • /
    • pp.65-71
    • /
    • 2021
  • Background: The hamstring is a muscle that crosses two joints, that is the hip and knee, and its flexibility is an important indicator of physical health in its role in many activities of daily living such as sitting, walking, and running. Limited range of motion (ROM) due to hamstring tightness is strongly related to back pain and malfunction of the hip joint. High-frequency diathermy (HFD) therapy is known to be effective in relaxing the muscle and increasing ROM. Objects: To investigate the effects of HFD on active knee extension ROM and hamstring tone and stiffness in participants with hamstring tightness. Methods: Twenty-four participants with hamstring tightness were recruited, and the operational definition of hamstring tightness in this study was active knee extension ROM of below 160° at 90° hip flexion in the supine position. HFD was applied to the hamstring for 15 minutes using the WINBACK device. All participants were examined before and after the intervention, and the results were analyzed using a paired t-test. The outcome measures included knee extension ROM, the viscoelastic property of the hamstring, and peak torque for passive knee extension. Results: The active knee extension ROM significantly increased from 138.8° ± 9.9° (mean ± standard deviation) to 143.9° ± 10.4° after the intervention (p < 0.05), while viscoelastic property of the hamstring significantly decreased (p < 0.05). Also, the peak torque for knee extension significantly decreased (p < 0.05). Conclusion: Application of HFD for 15 minutes to tight hamstrings immediately improves the active ROM and reduces the tone, stiffness, and elasticity of the muscle. However, further experiments are required to examine the long-term effects of HFD on hamstring tightness including pain reduction, postural improvement around the pelvis and lower extremities, and enhanced functional movement.

Muscle Activation of Soleus and Tibialis Anterior according to Landing Strategy of Initial Contact during Descending Stairs: Comparison of Forefoot and Whole Foot

  • Choi, Suwoong;Lee, Yunbin;Park, Taeyang;Hwang, Sujin
    • Physical Therapy Rehabilitation Science
    • /
    • v.10 no.1
    • /
    • pp.16-21
    • /
    • 2021
  • Objective: To control the rate at which body weight drops, forefoot initiates floor contact with the limb relatively extended at each joint. However, when the knee joints could not extend enough with going down the stairs, the forefoot cannot be contact initially. The purpose of this study was to investigate the differences between forefoot and whole foot in initial contract on soleus and tibialis anterior for health young adults when descending stairs. Design: A cross-sectional observational study design. Methods: Fifteen healthy young adults participated in this study. To compare between forefoot and whole foot in initial contact when going down the stairs, this study measured muscle activation on soleus and tibialis anterior. This study used the paired t-test to analyze the collected data and compare the supporting conditions. Results: After analyzing, the muscle activation of soleus was not statistically significant difference as 25.16% at forefoot initial contact and 24.37% at whole foot initial contact when descending stairs (p>0.05). However, the muscle activation of tibialis anterior muscle was significantly difference was 49.19% at forefoot contact and 71.55% at whole foot contact. Conclusions: The results of this study was that the muscle activation of the tibialis anterior was a higher at whole foot contact than that at fore foot contact when descending stairs. This study suggests that the landing strategy of the initial contact is a beneficial effect at the forefoot contact to maintain the postural balance and the muscle performance effectively when descending stairs in individuals with healthy young adults.