• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2007년도 추계학술대회 및 정기총회
• /
• pp.3-6
• /
• 2007

In the traditional inventory problem, market parameters such as demand and selling price are exogenous. But incorporating these factors into the model can provide an opportunity for increasing the total profit. So we investigate the joint price-inventory policy in a supply chain consisting of a single retailer and a single manufacturer. Demand at the retailer depends on the retail price. The retailer and the manufacturer cooperate closely each other to maximize overall profit of the supply chain. The mathematical model is presented and the solution procedure is developed in order to jointly determine the optimal policy including the retail price, the production lot sizes, and the delivery frequency from the manufacturer to the retailer.

• 한국군사과학기술학회지
• /
• 제13권6호
• /
• pp.1064-1070
• /
• 2010

Korea Department of Defense has been developing Link-K, Korean Joint Tactical Datalink, to support their independent joint operations and trying to enlarge the scope of Link-K tactical message delivery to nodes in IP based tactical networks for sharing situation awareness more broadly. A Link-K tactical message size is too small to fit into an IP packet, inefficiently wasting most of the IP packet space of the low bandwidth IP-based tactical networks. This paper proposes a new Link-K tactical message aggregation and delivery method when tactical messages need to be sent to some nodes located at IP-based tactical networks. With numerical analysis and OPNET simulation studies, we prove the effectiveness and efficiency of the proposed method.

• Management Science and Financial Engineering
• /
• 제4권2호
• /
• pp.15-42
• /
• 1998

A joint problem of order delivery, setup reduction, and cost-sharing in a two-echelon inventory system in which a vendor supplies multiple products to a group of buyers is studied here. The basic premise is that buyers have independently implemented setup reduction programs to acquire benefits from small order sizes. Doing so, however, causes the buyers' individually optimal order cycles to be differ from that of the vendor. In conjunction with this, two models are considered. In the first model, a multi-buyers single product situation is considered in which the vendor implements a joint supply cycle policy. However, buyers, as the dominant party, insist after implementing the individually optimal setup reduction that the vendor accept their individually optimal order schedules. In the second model. a multi-products, single buyer situation is considered in which the buyer implements a joint order policy. Here, the vendor, as the dominant party, refuses to cooperate fully with the buyer's individually reduced joint order schedule, and designs his own individually optimal setup reduction mix for each product under a given budget constraint. This led to a study of an integrated Setup Reduction/Break-even Pricing Policy for each situation to eliminate mismatches in individually optimal cycle times.

• 대한견주관절학회:학술대회논문집
• /
• 대한견주관절학회 2008년도 제16차 학술대회
• /
• pp.7-7
• /
• 2008

• Journal of Oral Medicine and Pain
• /
• 제44권2호
• /
• pp.69-73
• /
• 2019

Synovial chondromatosis (SC) is an uncommon progressive cartilaginous metaplasia of residual mesenchymal cells in synovial tissue. This disorder usually affects large joints and is rarely observed in the temporomandibular joint (TMJ). SC in TMJ is difficult to diagnose early owing to non-specific clinical symptoms. In this article, we report a patient with SC on the right TMJ, who presented with pain in the right TMJ and progressive occlusal changes, not responsive to conventional conservative temporomandibular disorder treatment for several months. This case emphasizes the importance of an accurate specific diagnosis for TMJ problems before the delivery of any treatment.

• 유통과학연구
• /
• 제5권2호
• /
• pp.17-34
• /
• 2007

한국 제약산업은 제약회사의 수와 거래선의 수가 많고, 다품종 소량생산체제이며 동일성분의 경쟁품이 많은 실정이다. 이러한 실정 하에서 통합물류가 물류원가 절감 및 효율적인 배송에는 적절한 방안이라고 할 수 있으나 기업마다 다른 배송 조건 문제, 다품종 소량주문의 적기 배송 문제 등 회사 특유의 서비스 제공 등에 한계가 있어서 경쟁적 매출증가에 문제점이 있다 하겠다. 이와 같이 물류원가는 절감해야하고 영업효율성은 증대시켜야 하는 두 가지 문제를 두고 다음과 같은 대처방안을 제시하고자 한다. 첫째, 제약회사 간 품목 공동마케팅 실시. 둘째, 규모가 비슷한 3개 회사 이하 합동 배송실시. 셋째, 매출이 큰 제품은 도매상과 유통 일원화 협약. 넷째, 도매상이 제약 물류 서비스하도록 준비. 다섯째, 거래선의 협조 등이다. 결론적으로 한국제약산업에서 통합물류가 필요하지만 산업의 특성상 중소제약회사는 완전 통합물류는 매출이 감소할 것이라는 가정하에 그 시행이 어려울 것으로 판단되는 것이다.

• 한국자동차공학회논문집
• /
• 제13권5호
• /
• pp.19-28
• /
• 2005

It is of great economic importance to minimize the cylinder wear and the consumption rate of cylinder oil in a large two-stroke diesel engine. The motor-driven cylinder lubricator was first developed fur a large two-stroke marine diesel engine made in $W{\ddot{a}}rtsil{\ddot{a}}a$ Switzerland Ltd. by the joint research of industry-university. In this study, the effects of revolution speed, plunger stroke and cylinder back pressure on maximum discharge and delivery pressures, delivery delay duration, and oil feed rate are experimentally investigated by the home-manufactured cylinder lubricator. The maximum discharge pressure with a spot of 0.03 m and the maximum loss pressure at spots of 5, 6.78 and i 0 m away from the end of lubricator slot are increased as plunger stroke, revolution speed and back pressure are elevated, and the delivery delay duration is shortened as plunger stroke, revolution speed and oil pipe length are increased. Also, oil feed rate is increased as plunger stroke and revolution speed are raised, but lowered as the back pressure is increased.

• 대한심미치과학회지
• /
• 제30권2호
• /
• pp.71-90
• /
• 2021

가상 환자 데이터 세트는 단일 환자로부터 획득한 구강스캔 안면스캔 전신스캔 하악운동경로데이터 등 다양한 소스의 진단 데이터를 하나의 3차원 좌표계로 정렬한 데이터의 집합이다. 치과의사는 가상 환자 데이터 세트를 사용하여 효과적으로 치료 계획을 수립하고 다양한 치료 계획을 가상공간상에서 시뮬레이션 할 수 있으며, 가상 환자 데이터 세트에서 환자의 미소를 디자인 후 그 결과를 시뮬레이션하고 최적의 치료결과를 선택할 수 있다. 가상공간에서 선택된 치료 계획은 3D 프린팅, 밀링, 사출 성형과 같은 제조 기술을 사용하여 환자에게 동일하게 전달될 수 있다. 이러 치료 계획의 전달은 임시 수복물 제작 및 환자의 구강 내에서 목업 확인을 통해 최종 보철물 제작으로 연결할 수 있다. 이와 같이 진단 데이터, 중첩 및 가공의 정확도가 보장된다면 3차원 가상공간 상에서 시뮬레이션된 3D 디지털 스마일 디자인을 실제 환자에게 정확하게 전달할 수 있다. 가상환자데이터세트의 임상적용방법으로 동기능적교합측정 검사를 통해 교합조정치료를 치료계획에서 배제할수 있는 의사결정방법과, 턱관절질환을 가지고 있는 청소년기 특발성 척추측만증 환자의 턱관절 치료전후 전신스캔 비교분석방법, 그리고 전악수복증례인 상하악 총의치환자 진료시 가상환자데이터세트에 기반한 교합평면분석 및 디지털심미분석방법을 제시하였다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.169-175
• /
• 2002

World demand for natural gas has generated the need for many new land transmission pipelines to be installed in the next decade or so. Although mechanized gas metal arc welding is well developed, there are opportunities for cost savings by using alternative welding processes. Hybrid Nd:YAG laser - gas metal arc welding enables fibre optic delivery of the laser energy to a robotic welding head to be combined with the addition of extra energy and a consumable to produce good quality, deep penetration welds in a single pass. The present paper describes initial procedure development to optimize the laser and gas metal arc welding parameters for making joints in pipeline steel. Satisfactory joint quality was obtained and it is intended to develop the process to prototype field trials.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권12호
• /
• pp.4451-4466
• /
• 2014

We present joint radio selection and relay scheme that delivers data from a source to a sink in heterogeneous stationary sensor networks consisting of various radio interfaces. The proposed scheme finds the optimal relay nodes and their corresponding radio interfaces that minimize energy consumption throughout the network while satisfying the end-to-end packet deadline requirement. We formulate the problem of routing through radio interface selection into binary integer programs, and obtain the optimal solution by solving with an optimization solver. We examine a trade-off relationship between energy consumption and packet delay based on network level simulations. We show that given the end-to-end deadline requirement, our routing algorithm finds the most energy-efficient routing path and radio interface across mesh hops. We demonstrate that the proposed routing scheme exploits the given packet delivery time to turn into network benefit of reducing energy consumption compared to routing based on single radio interface.