• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.375-386
• /
• 2016

Most existing studies on broadcast services in orthogonal frequency division multiplexing (OFDM) systems have focused on how to allocate the transmission power to the subcarriers. However, because a broadcasting system must guarantee quality of service to all users, the performance of the broadcast service dominantly depends on the channel state of the user who has the lowest received signal-to-noise ratio among users. To reduce the effect of the worst user on the system performance, we propose a joint delivery scheme of unicast and broadcast transmissions in OFDM systems with broadcast and unicast best-effort users. In the proposed joint delivery scheme, the BS delivers the broadcast information using both the broadcast and unicast subcarriers at the same time in order to improve the performance of the broadcast service. The object of the proposed scheme is to minimize the outage probability of the broadcast service while maximizing the sum-rate of best-effort users. For the proposed joint delivery scheme, we develop an adaptive power and subcarrier allocation algorithm under the constraint of total transmission power. This paper shows that the optimal power allocation over each subcarrier in the proposed scheme has a multi-level water filling form. Because the power allocation and the subcarrier assignment problems should be jointly solved, we develop an iterative algorithm to find the optimal solution. Numerical results show that the proposed joint delivery scheme with adaptive power and subcarrier allocation outperforms the conventional scheme in terms of the outage probability of the broadcast service and the sum-rate of best-effort users.

• IE interfaces
• /
• v.17 no.spc
• /
• pp.90-96
• /
• 2004

In this paper, we consider the joint replenishment problem of a one-warehouse, n-retailer system. We introduce a joint replenishment and delivery strategy of a warehouse and develop a mathematical model based on the proposed strategy. Two efficient algorithms are presented and compared using numerical examples. The proposed strategy is compared with the common cycle strategy for 1,600 randomly generated problems, and has been proven to be superior to the common cycle strategy.

• The Journal of Korean Medicine
• /
• v.38 no.1
• /
• pp.125-133
• /
• 2017

Objectives: The purpose of this study is to investigate the correlation between postpartium joint diseases and maternal season. So it can prevent postpartum joint diseases and provide fundamental data about postpartum health care. Methods: The subject of the present study was 219 women (142 women who completed vaginal delivery and 77 women who delivered by cesarean section) who completed labor between November 1, 2013 and November 31, 2016, at the clinic of OB&GYN. They have been taking good care of their health at postpartum clinic in Andong Woori Women Hospital. We investigated the various symptoms and situation which occurred from the moment of hospital to postnatal admission health care period and oriental doctor examined the patients. We classified the symptoms by the age of patients, the method of delivery, the term of pregnancy, the body weight of infant, the weight change of mother and the way of feeding. Through data analysis, we investigated the correlation between maternal season and postpartum joint diseases. Results: Postpartum joint diseases were the most common among all symptoms after childbirth. Postpartum joint diseases were classified into shoulder area pain and low back pain. In low back pain, there was no significant difference between maternal season and postpartum joint diseases. In shoulder, wrist and finger pain, pain was the most severe at winter delivery. It was the most painful in winter, followed by autumn, spring and summer. Conclusion: There was a close correlation between postpartum joint disease manifestations and maternal season.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.3
• /
• pp.106-116
• /
• 2021

This paper considers a joint problem for blood inventory planning at hospitals and blood delivery planning from blood centers to hospitals, in order to alleviate the blood service imbalance between big and small hospitals being occurred in practice. The joint problem is to determine delivery timing, delivery quantity, delivery means such as medical drones and legacy blood vehicles, and inventory level to minimize inventory and delivery costs while satisfying hospitals' blood demand over a planning horizon. This problem is formulated as a mixed integer programming model by considering practical constraints such as blood lifespan and drone specification. To solve the problem, this paper employs a Lagrangian relaxation technique and suggests a time efficient Lagrangian heuristic algorithm. The performance of the suggested heuristic is evaluated by conducting computational experiments on randomly-generated problem instances, which are generated by mimicking the real data of Korean Red Cross in Seoul and other reliable sources. The results of computational experiments show that the suggested heuristic obtains near-optimal solutions in a shorter amount of time. In addition, we discuss the effect of changes in the length of blood lifespan, the number of planning periods, the number of hospitals, and drone specifications on the performance of the suggested Lagrangian heuristic.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.537-541
• /
• 2003

The synchronization of production-delivery artivities is one of crucial factors to get competitive collaboration benefits between the manufacturer and the retailor(s). There were several researches to study on He optimal delivery policy to minimize the total cost of integrated system of both manufacturer and retailor(s). In this research, we investigate the joint optimal shipment policy in case that a manufacturer produces multiple products sharing a single production facility in the manufacturer side and retailor(s) deploys JIT delivery pattern with equal-size shipment policy. We formulate this problem as a form of 'Common Cycle Approach' in classical ELSP (Economic Lot Scheduling Problem) and provide simple optimal solution procedure.

• Biomaterials and Biomechanics in Bioengineering
• /
• v.2 no.3
• /
• pp.159-172
• /
• 2015

Treatment of polymicrobial infected musculoskeletal defects continues to be a challenge in orthopaedics. This research investigated single and dual-delivery of two antibiotics, vancomycin and amikacin, targeting different classes of microorganism from a biodegradable calcium sulfate-chitosan-nHA microsphere composite scaffold. The addition of chitosan-nHA was included to provide additional structure for cellular attachment and as a secondary drug-loading device. All scaffolds exhibited an initial burst of antibiotics, but groups containing chitosan reduced the burst for amikacin at 1hr by 50%, and vancomycin by 14-25% over the first 2 days. Extended elution was present in groups containing chitosan; amikacin was above MIC ($2-4{\mu}g/mL$, Pseudomonas aeruginosa) for 7-42 days and vancomycin was above MIC ($0.5-1{\mu}g/mL$ Staphylococcus aureus) for 42 days. The antibiotic activity of the eluates was tested against S. aureus and P. aeruginosa. The elution from the dual-loaded scaffold was most effective against S. aureus (bacteriostatic 34 days and bactericidal 27 days), compared to vancomycin-loaded scaffolds (bacteriostatic and bactericidal 14 days). The dual- and amikacin-loaded scaffolds were effective against P. aeruginosa, but eluates exhibited very short antibacterial properties; only 24 hours bacteriostatic and 1-5 hours bactericidal activity. For all groups, vancomycin recovery was near 100% whereas the amikacin recovery was 41%. In conclusion, in the presence of chitosan-nHA microspheres, the dual-antibiotic loaded scaffold was able to sustain an extended vancomycin elution longer than individually loaded scaffolds. The composite scaffold shows promise as a dual-drug delivery system for infected orthopaedic wounds and overcomes some deficits of other dual-delivery systems by extending the antibiotic release.

• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.4
• /
• pp.112-120
• /
• 2021

Recently, the number of consumers using digital online distribution platforms is increasing. This caused the rapid growth of the e-commerce market and increased delivery volume in urban areas. The logistics system, designed ar006Fund the city center to handle the delivery volume, operates a delivery system from the outskirts of the city to the urban area using cargo trucks. This maintains an ecosystem of high-cost and inefficient structures that increase social costs such as road traffic congestion and environmental problems. To solve this problem, research is being conducted worldwide to establish a high-efficiency urban joint logistics system using urban railway facilities and underground space infrastructure existing in existing cities. The joint logistics system begins with linking unmanned delivery automation services that link terminal delivery such as cargo classification and stacking, infrastructure construction that performs cargo transfer function by separating from passengers such as using cargo platform. To this end, it is necessary to apply the device to the vertical and horizontal transportation machine supporting the vertical transfer in the flat space of the joint logistics terminal, which is the base technology for transporting cargo using the transfer robot to the destination designated as a freight-only urban railway vehicle. Therefore, this paper aims to derive holistic viewpoints needs for design requirements for vertical and vertical transportation machines and freight transportation standard containers, which are underground railway logistics transport devices to be constructed by urban logistics ecosystem changes.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2006.11a
• /
• pp.134-137
• /
• 2006

Satisfying the customer orders with a short lead-time is one of the essential and competitive factors for business units under a mass customization environment. To shorten the lead-time for fulfilling various orders entails the production capacity expansion and efficient operational policy. Most business firms utilize the multiple production lines or facilities to cope with this business and manufacturing environment by making the manufacturing and distribution more flexible. In this study, we introduce the operational problem determining the joint production and delivery policy in an environment where multiple products are manufactured with more than one production lines. Also, we propose the heuristic solution approach for determining the product-line selection and joint lot size for this problem.

• The Journal of Industrial Distribution & Business
• /
• v.10 no.10
• /
• pp.45-51
• /
• 2019

Purpose - The purpose of this study was to propose a win-win development plan for not only suppliers of delivery applications but also traditional market vendor companies and delivery riders by analyzing existing delivery models and presenting a new delivery model to enhance competitiveness of the traditional market using delivery apps. Research desgin, data, and methodology - Specifically, small retailers, such as traditional markets and supermarkets, presented a compromised delivery model that utilizes the platform of specialized delivery app service providers for order reception, and that the delivery is delivered by delivery systems jointly hired by Vendor companies, such as franchising companies. To validate the significance of the trade-off delivery model, a cost-benefit analysis was conducted by those involved in the delivery application. Results - From the perspective of suppliers of specialized delivery applications, it is analyzed that the use of specialized delivery applications in traditional markets will be a new market opportunity for service providers to achieve increased sales. It is expected that consumer choice and satisfaction will be increased as convenience and accessibility of traditional market businesses that were available only through direct visit from the user side of the delivery application will be expanded. From the standpoint of delivery application franchises, it is analyzed that they can seek to increase sales and increase customer service as well as ease labor cost burden due to joint employment of delivery riders. The delivery rider will be able to seek to improve customer service due to job security, wage stability, risk reduction and overheated competition due to direct employment. Conclusion - In conclusion, the compromised delivery model solved the problems raised in the preceding study conducted on delivery application suppliers, users, franchises, and riders to establish that it could be a strategic alternative to increasing sales and expanding detailed rights for the self-employed in the traditional market, which are experiencing difficulties in management. However, the adoption of a compromise delivery model requires social consensus from those involved in the delivery application and requires legal, institutional and policy support, which will require continued follow-up research on the delivery model in the future.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.05a
• /
• pp.98-101
• /
• 2022

Before the delivery platform was established, when consumers ordered by phone to the store, a rider hired by the store directly delivered it or delivered it through a delivery agency. However, as the food service culture develops, delivery platforms grow and more people seek convenience, making it difficult to see orders without delivery platforms now. When ordering using the delivery platform in this way, there is a shortage of riders and a negative effect of increasing delivery costs for supply. Therefore, we propose a joint delivery chat app to solve the problems of the current delivery system and reduce delivery costs.