• 한국컴퓨터정보학회논문지
• /
• 제24권11호
• /
• pp.187-193
• /
• 2019

본 연구는 국제합작사업 기업들을 대상으로 합작사업 참여기업 간 지식공유 및 활용이 참여자간 특성과 합작 성과에 어떠한 영향을 주는지를 살펴보고자 하였다. 본 연구에서는 국제합작사업의 지식공유 및 활용이 국제합작사업 참여기업 간 특성인 참여기업 간 계약준수, 사업 참여 동기 및 의지, 경영 자율성, 조직문화들과 합작성과에 어떠한 유의한 영향을 미치며 또한, 국제합작사업 기업들만이 가지는 특징을 실증분석을 통하여 알아보고자 하였다. 실증분석결과 지식공유 및 활용은 계약준수, 경영자율성, 사업 참여 동기 및 의지, 조직문화에 긍정적인 영향을 주며, 계약준수, 경영자율성, 사업 참여 동기 및 의지는 합작성과에 긍정적인 영향을 미치는 것으로 나타났다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.252-257
• /
• 2006

Low vibration characteristics of a vehicle are mainly influenced by the local stiffness of the joint structure beam section. The method of substituting equivalent beam element to spring element for the joint is presented. Formation process of the equivalent beam joint modeling is described in terms of key section properties. To get required dynamic characteristics section properties of the equivalent beam element are set to design variables. The study shows that the equivalent beam joint model can be effectively used for low frequency vibration analysis of a vehicle.

• 산업기술연구
• /
• 제23권A호
• /
• pp.69-81
• /
• 2003

Numerical analysis is important for the design, construction and maintenance of large caverns. The rock mass contains generally discontinuities such as faults, joints and fissures. The mechanical behavior and geometric characteristics of these discontinuities would have a significant impact on the stability of the caverns. In this research the Distinct Element Method(DEM) was used to analyze the structural stability of the large cavern. The Barton-Bandis Joint Model (B-B J.M) was used as a constitutive model for the joint. In addition, two different cases 1) analysis with a support system and 2) analysis with no support system, were analyzed to optimize a support system and to investigate reinforcing effects of a support system. The most significant parameters of in-situ stress, JRC of in-situ natural joints, and spatial distribution characteristics of discontinuities were acquired through field investigation. Displacement (horizontal, joint shear), maximum joint opening, maximum and minimum principal stresses, range of relaxed zone, rockbolt axial forces and shotcrete stresses were calculated at each excavation stage. As a result of analysis the calculated values proved to be under the allowable value Rockbolts also proved to be an efficient support measure to control joint shear displacement which had significant effects on extending the relaxed zone. As a consequence, the structural stability of the cavern was assured with an appropriate support system.

• 한국운동역학회지
• /
• 제34권2호
• /
• pp.45-52
• /
• 2024

Objective: The purpose of this study was to measure the morphological characteristics of the foot and biomechanical variables of the lower extremity joints during vertical jump and investigate the relationship between foot morphology and biomechanics of vertical jump. Method: 24 men in their 20s (age: 22.42 ± 1.41 yrs, height: 173.37 ± 4.61 cm, weight: 72.02 ± 6.21 kg, foot length: 251.70 ± 8.68 mm) participated in the study. Morphological characteristics of the foot included the length of the first toe, the length of the second toe, and the horizontal length from the center of ankle joint to the achilles tendon (Plantar Flexion Moment Arm [PFMA]). Biomechanical variables were measured for plantar flexor strength of the ankle joint and peak angular velocity, moment, and power of the lower extremity joint during vertical jump. Results: There was a significant correlation between the length of the first toe and plantar flexion strength at 30°/s [r=.440, p=.016], the angular velocity of the metatarsophalangeal [MTP] joint [r=-.369, p=.038] while significant correlations between PFMA and the angular velocities of the knee joint [r=.369, p=.038] and ankle joint [r=.420, p=.021] were found. There were also significant correlations between the length of the first toe and the maximum moment of the hip joint [r=.379, p=.034], and the length of the second toe and the power of the hip joint [r=-.391, p=.029]. Finally, significant correlations between PFMA and the power of the ankle joint [r=.424, p=.019] and MTP joint [r=.367, p=.039] were found. Conclusion: Based on the results of this study, the length of the toe and PFMA would be related to the function of the lower extremity joint. Therefore, this should be considered when designing the functional structure of a shoe. Furthermore, this relationship can be applied to intensive training for the plantar flexors and toe flexors to improve power in athletic performance.

• 대한의용생체공학회:의공학회지
• /
• 제35권2호
• /
• pp.26-34
• /
• 2014

Little information is available about the characteristics in revolution gait of hemiplegic elderly, which is frequently represented in daily life. It is also hard to elucidate purely the characteristics due to hemiplegia because of no consideration of aging factors. The aim of study is to identify the alteration characteristics of lower extremity joint angles in both straight and revolution gaits together due to hemiplegia through comparing healthy with hemiplegic elderly. Following Institutional Review Board approval, twelve healthy and hemiplegic elderly were participated and the center of body mass (COM) and lower extremity joint angles were measured during straight and revolution gaits using a computer-aided video motion capture system. The results showed that the gait characteristics were generally altered in both straight and revolution gaits due to hemiplegia (p < 0.05). The gait characteristics were then different between the straight and revolution gaits each other. This study may be valuable by identifying for the first time the alterations of the lower extremity joint angles in both straight and revolution gaits due to pure hemiplegia through comparing healthy elderly with hemiplegic elderly.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.745-750
• /
• 2000

The shear strength of rock discontinuities is very important in many rock engineering project including analysis of tunnel and slope. But shear strength of rock that acquired through discontinuity shear test is different from soil shear test and more complex. Shear strength is effected by the factors which are various, but it is the best influence of filling material and joint roughness. In this research, we studied shear strength characters of natural joint of phillite that was placed importance on joint roughness, JRC is less low than 8.

• 한국재료학회지
• /
• 제33권5호
• /
• pp.214-221
• /
• 2023

As a filler metal for lowering the melting point of Ag, many alloy metal candidates have emerged, such as cadmium, with zinc, manganese, nickel, and titanium as active metals. However, since cadmium is known to be harmful to the human body, Cd-free filler metals are now mainly used. Still, no study has been conducted comparing the characteristics of joints prepared with and without cadmium. In addition, studies have yet to be conducted comparing the typical characteristics of brazing filler metals with special structures, and the joint characteristics of brazing filler metals with available frames. In this study, the characteristics of junctions of silver-based intercalation metals were compared based on the type of filler metal additives, using a special structure, a filler metal sandwich structure, to protect the internal base metal. The general filler metal was compared using the structure, and the thickness of the filler metal according to the thickness was reached. A comparison of the characteristics of the junction was conducted to identify the characteristics of an intersection of silver-based brazing filler metal and the effect on joint strength. Each filler metal's collective tensile strength was measured, and the relationship between joint characteristics and tensile joint strength was explored. The junction was estimated through micro strength measurement, contact angle measurement with the base metal when the filler metal was melted, XRD image observation, composition analysis for each phase through SEM-EDS, and microstructure phase acquisition.

• 한국지능시스템학회논문지
• /
• 제26권3호
• /
• pp.196-201
• /
• 2016

본 논문에서는 인간의 팔꿈치 관절의 기능을 활성화하기 위한 강성 기반 재활 메커니즘의 특성을 분석하 고자 한다.여기서,팔굼치 관절의 재활을 위한 도구는 탄성 줄을 사용하고, 사용된 줄은 선형 스프링으로 모델링하여 강성값으로 나타낸다. 이러한 메커니즘을 이용한 팔꿈치 관절 재활 훈련을 효과적으로 하기 위해서는 줄의 강성값에 따라 팔꿈치 관절에 가용할 수 있는 토오크 특성을 분석할 필요가 있다. 이러한 관점에서 다양한 시뮬레이션을 통하여 탄성 줄의 강성값 설정에 따른 팔꿈치 관절의 토오크 패턴 및 범위를 사전에 정의된 팔꿈치 관절의 운동 경로에 대하여 확인한다. 결과적으로, 이러한 강성 기반 재활 메커니즘이 팔꿈치 관절의 효과적인 재활을 수행하는데 유용하게 활용될 수 있음을 보인다.

• 한국산업융합학회 논문집
• /
• 제24권6_2호
• /
• pp.883-890
• /
• 2021

In this study, joint analysis was conducted on the rock slope by aerial surveying using UAV. Aerial photos were taken using UAV to measure the directionality of the rock slope exposed to the site, and the directionality of the joint was analyzed using the photographed photos. UAV photography was taken under conditions of 90% overlap and an altitude of 50m. The photographing path was measured in the horizontal, vertical, and oblique directions based on the slope, and the joint characteristics were analyzed. Aerial surveying research on the joint directionality analysis of rock slopes is still incomplete, and the method for accurate joint directionality analysis is not presented strategically, so it is difficult to apply it in design. Through the results of this study, we would like to propose an flight photographing technique for the investigation of rock joints. As a result of the study, in the case of the joint investigation of the rock slope using UAV, it was necessary to change conditions such as altitude, aerial photography route, and overlap according to the size of the joint according to the site conditions.

• 한국정밀공학회지
• /
• 제21권1호
• /
• pp.197-204
• /
• 2004

In this study we presented kinematic and kinetic data of foot joints using approximated equations and partial plantar pressure during gait. The maximum angular displacements of each tarsometatarsal joint were found to range from 4$^{\circ}$to 7$^{\circ}$ and the maximum moments were from 200Nㆍcm to 1500Nㆍcm. It was relatively wide distribution. Foot kinematic data calculated from the approximated equations, which were represented by the correlation between moment and angular displacement, and the data from motion analysis were similar. We found that the movements of foot joint were mainly decided by the passive characteristics of the joint when ground reaction force acts. The method of kinematic and kinetic analysis using approximated equations which is presented in this study is considered useful to describe the movements of foot joints in gait simulations.