• 전기학회논문지
• /
• 제66권11호
• /
• pp.1628-1633
• /
• 2017

The purpose of this study was to identify the difference and correlation in elbow joint maximal flexion strength according to measurement methods and characteristics of muscular contraction, and to develop the predictive equation of elbow joint maximal flexion strength for the optimal exercise intensity setting and accurate measurement. Subjects were 30 male university students. Elbow joint maximal flexion strength of isokinetic contraction, isometric contraction at $75^{\circ}$ elbow joint flexion position, isotonic concentric 1RM, manual muscle strength (MMT) were measured with isokinetic dynamometer, dumbbell, and manual muscle tester. Pearson's r, linear regression equation, and multiple regression equation between variables were calculated. As a result, the highest value was isometric contraction. The second highest value was MMT. The third highest value was isokinetic contraction. 1RM was the lowest. Predictive equations of elbow joint maximal flexion strength between isometric and isokinetic contraction, between isometric contraction and 1RM, among isometric contraction, 1RM, and body weight were developed. In conclusion, 1RM and isokinetic elbow joint maximal flexion strength could be seemed to underestimate the practical elbow joint maximal flexion strength. And it is suggested that the developed predictive equations in this study should be useful in criteria- and goal-setting for resistant exercise and sports rehabilitation after elbow joint injury.

• 터널과지하공간
• /
• 제29권2호
• /
• pp.89-107
• /
• 2019

암반구조물의 역학적 안정성과 수리적 특성을 분석하는데 있어 암반절리는 매우 중요한 역할을 한다. 방향, 크기, 체적빈도, 위치 등 대부분의 암반절리 파라미터들은 일반적으로 통계적인 기법에 의해 분포로 나타낸다. 본 연구에서는 이러한 암반절리 파라미터들 중 가장 불확실성이 큰 크기분포를 추정하는데 요구되는 Joint Center Volume(JCV) 산정 기법에 대해 분석하고, 조사창의 형상과 관계없이 적용할 수 있는 새로운 기법을 제안하였다. 기존 JCV의 이론적 산정법은 평면 조사창에만 적용이 가능하고, 전수조사 기법은 절리선 종류의 제약 및 해석시간 문제 등의 한계를 보였다. 본 연구에서는 몬테카를로 시뮬레이션을 이용하여 JCV를 산정하여, 조사창 형상 및 절리선 종류의 제약이라는 한계를 극복하고자 하였다. 제안된 기법은 곡면형, 터널형과 같은 비평면 조사창에서의 추정결과를 통해 적용성을 검증하였다.

• 대한토목학회논문집
• /
• 제31권6C호
• /
• pp.203-212
• /
• 2011

본 논문은 암반지층에 설치되는 굴착벽체의 안전하고 경제적인 설계 및 시공을 위해 절리가 형성된 암반지층에서 발생하는 토압의 크기 및 분포특성을 조사한 것이다. 이러한 목표를 위해, 먼저 기존 선행연구의 한계성 및 문제점을 파악하고 이를 극복하기 위해 암반지층의 다양한 절리특성 등을 고려할 수 있는 개별요소법(DEM)에 근거한 불연속체 수치해석적 매개변수 연구를 수행하였다. 매개변수로는 암반종류 및 절리상태(절리면의 전단강도 및 절리경사각)가 고려되었으며, 지반과 굴착벽체의 상호작용을 반영하면서 각 요소의 영향이 고려된 토압크기 및 분포특성이 파악되었다. 뿐만 아니라, 암반지층에서 발생된 토압과 토사지반에서의 경험토압인 Peck토압과의 상호 비교가 이루어졌다. 비교결과 절리가 형성된 암반지층에서 발생된 토압의 크기 및 분포는 암반의 종류 및 절리상태에 따라서 크게 영향을 받은 것으로 나타났고 토사지반에 있어서 Peck의 경험토압과 비교하여 서로 다른 특징을 나타내었다. 이와 같이 조사된 결과는 향후 절리가 형성된 암반지층에서의 굴착벽체 설계를 위한 토압산정에 필요한 정보 및 기초자료로서 활용될 것이다.

• 터널과지하공간
• /
• 제19권1호
• /
• pp.1-10
• /
• 2009

암반 내 구조물을 시공하는 경우 역학적 안정성을 평가하기 위하여 암반의 특성을 조사한다. 이 경우 암반의 특성은 주로 암반 내 절리의 특성에 의하여 좌우된다. 지금까지는 암반 내 절리의 특성을 조사하기 위하여 암반이 노출된 사면이나 노두에 접근하고 육안으로 직접 관찰하였다. 이때 급사면과 같은 곳에서 접근의 문제, 작업의 안전 문제, 많은 시판이 걸리는 문제, 조사시간에 비하여 얻은 정보량의 부족, 정보의 재현 문제, 측정 오차 문제 등의 제한이 있었다. 따라서 이와 같은 문제를 개선하기 위하여 LIDAR (light detection and ranging)로 암반을 스캔하여 얻은 포인트 클라우드(point cloud)글 Split-FX 소프트웨어로 처리한 결과 절기의 방향과 간격 및 절리면의 거칠기 등 절리의 특성을 정확하고 효율적으로 분석할 수 있었다.

• Steel and Composite Structures
• /
• 제21권1호
• /
• pp.137-156
• /
• 2016

Due to excellent advantages such as better illuminative effects, considerable material savings and ease and rapidness of construction, the bolted ball-cylinder joint which is a new type joint system has been proposed in space truss structures. In order to reveal more information and understanding on the behaviour of bolted ball-cylinder joints, full-scale experiments on eight bolted ball-cylinder joint specimens were conducted. Five joint specimens were subjected to axial compressive force, while another three joint specimens were subjected to axial tensile force. The parameters investigated herein were the outside diameter of hollow cylinders, the height of hollow cylinders, the thickness of hollow cylinders, ribbed stiffener and axial force. These joint specimens were collapsed by excessive deformation of hollow cylinders, punching damage of hollow cylinders, evulsion of bolts, and weld cracking. The strain distributions on the hollow cylinder opening were mainly controlled by bending moments. To improve the ultimate bearing capacity and axial stiffness of bolted ball-cylinder joints, two effective measures were developed: (1) the thickness of the hollow cylinder needed to be thicker; (2) the ribbed stiffener should be adopted. In addition, the axial stiffness of bolted ball-cylinder joints exhibited significant non-linear characteristics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.310-312
• /
• 2004

The aim of this study was to analyze the characteristics of knee joint sound in frequency domain and classify the knee joint diseases. The spectral analysis of knee joint sounds was performed using LPC(Linear Predictive Coding) and Wigner-Ville distribution. Ten normal subjects and 5 patients with meniscal tearing were enrolled. Each subject was seated on a chair and underwent active knee flexion and extension for 60 seconds. Sampling frequency was 10kHz and electronic stethoscope and electro-goniometer were applied during the knee motion for data collection. The spectral analysis showed 3 peaks in both groups and the difference energy distribution in time-frequency domain. These results suggest that the diagnosis of knee joint pathology using the auscultation could be easier and more correct.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제38권
• /
• pp.24.1-24.7
• /
• 2016

Background: This study aimed to evaluate the structural changes of temporomandibular joint immediately after condylar fractures with magnetic resonance imaging (MRI). Method: We evaluated 34 subjects of condylar fractures with MRI. The position, shape, and signal intensity of the condyle, disc, and retrodiscal tissue were analyzed with MR images. Results: Immediately after trauma, the disc was displaced with the fractured segment in almost all cases. And, the changes of signal intensity at the retrodiscal tissue were found but less related to the degree of fracture displacement. And, the high signals were observed almost at all fractured joint spaces and even at some contralateral joints. Conclusions: The displaced disc as well as the increased signal intensity of the joint space, condylar head, and retrodiscal tissue demands more attention to prevent the possible sequela of joint.

• 대한족부족관절학회지
• /
• 제9권2호
• /
• pp.135-139
• /
• 2005

Purpose: This study was performed to investigate the radiological characteristics of the degenerative arthritis of the ankle using the standing radiographs. Materials and Methods: From June 2001 to May 2005, 36 patients (56 ankles) who were treated for osteoarthritis of ankle were analysed. Angle of tibial shaft and tibial joint surface on AP view (TSA), angle of tibial joint surface on lateral view (TLS), tibial and medial malleolus angle (TMM) and talo-1st metatarsal angle were checked on standing radiograph. The patients with medial joint and total joint involvement were categorized into three stages according to the location of involvement. The degree of joint space narrowing was categorized into two groups. Results: There were no significant differences in TSA, TLS, TMM and talo-1st metatarsal angle with regard to the stage of arthritis. However, the difference between the less severe group and the severe group existed. Conclusion: Angular deformity was not correlated with stage, but correlated with severity. The deformity of distal tibial articular surface does not seem to be a cause of primary osteoartiritis, but rather a result from it.

• 터널과지하공간
• /
• 제15권4호
• /
• pp.288-295
• /
• 2005

암반은 여러 가지 지질학적 요인에 기인한 역학적 결함을 많이 포함하고 있기 때문에 이방성 거동을 보이는 경우가 대부분이다. 그러므로 안정한 암반구조물이나 암반기초의 설계를 위해서는 이방성 암반에서 응력분포의 특성을 이해하는 것이 매우 중요하다. 이 연구에서는 반무한 평면이방성 지반의 표면에 선하중이 작용할 때 지반에 야기되는 탄성응력 분포의 특성을 고찰하였다. 절리의 강성과 절리의 간격, 경사각이 응력분포 형태에 미치는 영향이 검토되었다. 절리면의 미끄러짐 조건으로 Mohr-Coulomb 식을 가정할 경우, 절리면을 통한 미끄러짐이 발생할 수 있는 영역에 대한 고찰도 수행되었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제16권5호
• /
• pp.60-66
• /
• 1992

In most cases a structure consists of the assembly of some substructures, we assemble them with various joints, and the structure is fixed to a foundation through mounts. In case of the structure with rigid joints like welding, the Finite Element Mothod could be easily used to analyize the structure's characteristics, but in case of the structure with elastic joints like bolts or rivets, it might be difficult to analyize it by taking account of joint's rigidities, with the conventional method. This paper proposes the method to identify the joint rigidities by the Sensitive Analysis Method and the Optimization Techniques. And the proposed method applied to identify the rigidities of 4 bolts to combine 2 plates(500mm long, 100mm wide, 3.15mm thich). The analized results were well coincident with the experimental results. To confirm the reliability 0 the rigidities identified, another trial was done for the stucture to combine other 2 plates with same joints. The results were good too. This paper is proposin the identifying method of the joint rigidity of a structure, and it could be used for the data base of the joint rigidity and for the guidance to select joint stiffness.