• Journal of Oral Medicine and Pain
• /
• v.33 no.4
• /
• pp.395-399
• /
• 2008

Orofacial pain and limited range of mouth opening as symptoms of temporomandibular disorder are mainly triggered by the structural and/or functional changes of temporomandibular joint and related structure itself. But careful diagnostic evaluation should be needed because they may be occurred by another pathologic conditions such as neoplasm in head and neck region. If there would be atypical pain characteristics or clinical features, systemic comorbid symptoms, or poor response to treatment, advanced imaging modalities such as CT or MRI will be mandatory for differential diagnosis. We experienced the case which was diagnosed as nasopharyngeal cancer mimicking temporomandibular disorder, and reviewed clinical considerations for proper differential diagnosis.

• Journal of the Korean Society for Railway
• /
• v.11 no.3
• /
• pp.225-232
• /
• 2008

AWS (all wheel steering) is applied to improve the stability and the turning performance. Most automotive cars are mainly controlled by FWS (front wheel steering) system except some cars which are made to improve their stability by using AWS. Articulated vehicles with a pivoting joint for easy turn are difficult to make a sharp turn because of the long body and long wheelbase. Therefore applying AWS to the articulated vehicles is effective to reduce the turning radius. The AWS control method for the articulated vehicles is currently applied to only Phileas vehicles which were developed by APTS. The paper on the design of a controller to guide an articulated vehicle along the path was published but control algorithm for manual driving has not been reported. In the present paper, steering, characteristics of the Phileas vehicles have been analyzed and then new algorithm has been proposed. To verify the AWS algorithm, Commercial S/W, ADAMS was used for validity of the dynamic model and algorithm.

• Journal of Korean Medical classics
• /
• v.28 no.4
• /
• pp.121-137
• /
• 2015

Objectives : To investigate the progress, characteristics, and reasons of CV12 moxibustion that King Sukjong of Joseon Dynasty had experienced 31 years since 1684. Methods : This study mainly extracted the records and related records about CV12 moxibustion of King Sukjong and relevant records from Seungjeongwon Ilgi, and analyzed them. Aside from that, medical books wrote at that time and relevant records were additionally investigated. Results : King Sukjong cauterized CV12 or other CV12 related acupoints with moxa 21 years out of his 31 years from 1684 to 1714. The cautery period was usually between late January and mid February. He had 100 pieces of moxa for cautery. On the last day of his moxibustion, he cauterized ST36 with moxa. The moxibustion process consisted of the following steps: suggestion or requirement of moxibustion, decision of date and time, and moxa cautery. In 1684, the reason why King Sukjong cauterized CV12 with moxa was to treat his joint pain and nauseous symptoms. The effect can be found in Donguibogam, many other Korean medical books, and other general books at that time. In 1685, he began to cauterize CV12 with moxa to prevent diseases. Since then, most moxa cautery on CV12 had been performed in the same context. Conclusions : For 21 years, King Sukjong repeatedly cauterized CV12 with moxa. The moxa therapy was conducted to prevent diseases mostly. And King Sukjong had a lot of interest in the therapy. For the reasons, the therapy had repeatedly been performed so long.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.4
• /
• pp.307-315
• /
• 2008

Post-tensioned precast concrete system (PPS) consists of U-shaped precast wide beams and concrete column. The continuity of beam-column joint is provided with the topping concrete on the PC shell beam and post-tensioning. Nonlinear analysis was conducted, using ANSYS, a finite-element analysis program, to obtain data for determining the characteristics of the structure and to allow various parametric analyses for post-tensioned wide beam-column connections. In this analysis, the Solid 65 element was used, in which concrete element had 8 nodes and each node had 3 degrees of freedomIn. Solid 65, the shear-transfer factor reflects a decrease of shear strength for the positions with cracks, as an impact factor to make the analysis value approximate the experiment value. In this study, the behavior of test specineus were most closely predicted to the experimental results, when the shear-transfer coefficient 0.85 was used for a closed crack, and 0.2 was used for an open crack.

• Journal of Welding and Joining
• /
• v.27 no.4
• /
• pp.73-78
• /
• 2009

Characterization of the microweld CCFL electrode for the TFT-LCD backlight unit was carried out in terms of the glass beading heat treatment conditions. We evaluate the weld zone and parent metal of the microweld CCFL electrodes that were exposed to simulated glass beading heat treatment. The CCFL electrode was composed of the cup made with pure Ni, the pin made with pure Mo and the lead wire made with Ni-Mn alloy. Each part of the electrode was assembled together by micro spot welding process and then the assembled electrodes were exposed to simulated glass beading temperatures of $700^{\circ}C,\;750^{\circ}C$ and $800^{\circ}C$. The microstructures of the microweld CCFL electrode were observed by using optical microscope, scanning electron microscope and EDS. Micro-tensile and microhardness test were also carried out. The results indicated that the grain coarsening in the HAZs(heat affected zones) for both the cup-pin weld and pin-lead wire were exhibited and the grain coarsening of the HAZ for the cup and the lead wire was more obvious than the HAZ of the pin. The micro-tensile test revealed that the fracture occurred at the cup-pin weld zone for all test conditions. The fracture surface could be classified into two parts such as pin portion and cup portion including weld nugget. The failure was seemed to be initiated from the boundary between nugget and pin through the weld joint. The result of the microhardness measurement exhibited that the relatively low hardness value, about 105HV was recorded at the HAZ of the cup. This value was about 50% less than that of the original value of the cup. The reduction of the microhardness was considered as the cause of the grain coarsening due to welding process. It was also appeared that there was no change in electric resistance for the standard electrodes and heat treated electrodes.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.1
• /
• pp.121-127
• /
• 2007

Muscle force produced by muscle fibers is transmitted to bones via tendinous structures(aponeuroses and tendon), resulting in joint(s) movement. As force-transmitting elements, mechanical behavior of aponeuroses and tendon are closely related with the function of muscle-tendon complex. The purpose of this study was to determine strain characteristics of aponeuroses for in-vivo human soleus muscle during submaximal voluntary contractions using an advanced medical imaging technique, velocity-encoded phase-contrast magnetic resonance imaging (VE-PC MRI). VE-PC MRI of the soleus muscle-tendon complex was acquired during submaximal isometric plantarflexion contraction-relaxation cycle (n = 7), using 3.0T Trio MRI scanner(Siemens AG, Malvern, MA). From the VE-PC MRI containing the tissue velocity in superior-inferior direction, twenty regions of interest(20 ROI; 10 on the anterior aponeurosis and 10 on the posterior aponeurosis) were tracked. During the isometric plantarflexion contraction-relaxation cycle, velocity and displacement profiles were different between the anterior and posterior aponeuroses, indicating heterogeneous strain behavior along the length of the leg. The anterior aponeurosis elongated while the posterior aponeurosis shortened during the initial phase of the contraction. Moreover, strain behavior of the posterior aponeurosis was different from that of the Achilles tendon. Possible explanation for the observed variations in strain behavior of aponeuroses was investigated with morphological assessment of the soleus muscle and it was found that the intramuscular tendinous structures significantly vary among subjects. In conclusion, the heterogeneous mechanical behavior of the soleus aponeuroses and the Achilles tendon suggests that the complexity of skeletal muscle-tendon complex should be taken into consideration when modeling the complex for better understanding of its functions.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.3
• /
• pp.66-75
• /
• 2017

Priority disciplines are an important scheme for service systems to differentiate their services for different classes of customers. (N, n)-preemptive priority disciplines enable system engineers to fine-tune the performances of different classes of customers arriving to the system. Due to this virtue of controllability, (N, n)-preemptive priority queueing models can be applied to various types of systems in which the service performances of different classes of customers need to be adjusted for a complex objective. In this paper, we extend the existing (N, n)-preemptive resume and (N, n)-preemptive repeat-identical priority queueing models to the (N, n)-preemptive repeat-different priority queueing model. We derive the queue-length distributions in the M/G/1 queueing model with two classes of customers, under the (N, n)-preemptive repeat-different priority discipline. In order to derive the queue-length distributions, we employ an analysis of the effective service time of a low-priority customer, a delay cycle analysis, and a joint transformation method. We then derive the first and second moments of the queue lengths of high- and low-priority customers. We also present a numerical example for the first and second moments of the queue length of high- and low-priority customers. Through doing this, we show that, under the (N, n)-preemptive repeat-different priority discipline, the first and second moments of customers with high priority are bounded by some upper bounds, regardless of the service characteristics of customers with low priority. This property may help system engineers design such service systems that guarantee the mean and variance of delay for primary users under a certain bounds, when preempted services have to be restarted with another service time resampled from the same service time distribution.

• Korean Journal of Veterinary Service
• /
• v.34 no.4
• /
• pp.353-359
• /
• 2011

Fowl cholera is a contagious acute and chronic disease caused by Pasteurella multocida in both domesticated and wild birds. Acute fowl cholera in both chickens and wild birds has recently been documented in Korea, but the chronic form has not been reported in Korea until now. This study describes the first outbreak of chronic fowl cholera in 13-week-old Arbor Acre broiler breeder chickens submitted to the College of Veterinary Medicine, Kyungpook National University in April 2006. The clinical signs of the affected flock of 9,621 chickens were lameness caused by swollen hock joints, diarrhea, ruffled feathers, and an average weekly mortality of 1.0%. At necropsy, purulent or caseous exudates were found in the hock and wing joints, humerus, and eyes, and severe pneumonia and pericarditis were discovered. Eleven bacterial isolates obtained from the liver, joint, infraorbital sinus and sternal bursa of the submitted chickens were all identified as Pasteurella multocida based on their physiological and biochemical characteristics. Five isolates were examined for antimicrobial susceptibility against 21 different antimicrobial agents including ampicillin. All were resistant to kanamycin, neomycin, and streptomycin, and some were resistant to gentamicin. The tested isolates were all susceptible to the other 17 antimicrobial agents. All 11 isolates were capsular serogroup A based on multiplex polymerase chain reaction. In addition, two of five isolates used in the antimicrobial susceptibility test were identified as somatic serotype 1 by an agar gel diffusion precipitin test, while the others were non-typable.

• The Journal of the Korean bone and joint tumor society
• /
• v.13 no.2
• /
• pp.135-141
• /
• 2007

Nodular faciitis is generally considered to be benign proliferation of fibroblasts and myoblasts, and it measures dimension up to 3cm. The characteristics such as rapid growth, abundant cellularity, and mitotic activity occasionally cause these lesions to mimic sarcoma. The authors experienced two cases of nodular fasciitis of the thigh, which were unusually large with dimension of more than 5cm. All of these two cases mimicked sarcoma and one of two cases, which initially mimicked sarcoma clinically and histologically in our hospital, was finally diagnosed as nodular fasciitis after requesting external consultation to several experienced pathologists. All of two cases had no evidence of recurrence at 2 years postoperatively. The lesions of unusually large dimension such as in our cases must be included in the differential diagnosis of soft tissue sarcoma. So we report two cases of nodular fasciitis of the thigh with a review of the current literature.

• The korean journal of orthodontics
• /
• v.46 no.3
• /
• pp.137-145
• /
• 2016

Objective: The purpose of this study was to investigate the characteristics of orthodontic patients at Yonsei Dental Hospital from 2008 to 2012. Methods: We evaluated Angle's classification from molar relationships, classification of skeletal malocclusion from the A point-nasion-B point angle, facial asymmetry, and temporomandibular joint disorders (TMDs) from the records of 7,476 patients who received an orthodontic diagnosis. The orthognathic surgery rate, extraction rate, and extraction sites were determined from the records of 4,861 treated patients. Results: The patient number increased until 2010 and gradually decreased thereafter. Most patients were aged 19-39 years, with a gradual increase in patients aged ${\geq}40years$. Angle's Class I, Class II divisions 1 and 2, and Class III malocclusions were observed in 27.7%, 25.6%, 10.6%, and 36.1% patients, respectively, with a gradual decrease in the frequency of Class I malocclusion. The proportion of patients with skeletal Class I, Class II, and Class III malocclusions was 34.3%, 34.3%, and 31.4%, respectively, while the prevalence of facial asymmetry and TMDs was 11.0% and 24.9%, respectively. The orthognathic surgery rate was 18.5%, with 70% surgical patients exhibiting skeletal Class III malocclusion. The overall extraction rate among nonsurgical patients was 35.4%, and the maxillary and mandibular first premolars were the most commonly extracted teeth. Conclusions: The most noticeable changes over time included a decrease in the patient number after 2010, an increase in the average patient age, and a decrease in the frequency of Angle's Class I malocclusion. Our results suggest that periodic characterization is necessary to meet the changing demands of orthodontic patients.